1 3

Woodward|9905-864|Peak 150 Control Module
SKU: 9905-864

  • Manufacturer: Woodward

  • Product No.: 9905-864

  • Condition：Stokta var

  • Product Type: Peak 150 Control Module

  • Product Origin: USA

  • Payment:T/T, Western Union

  • Weight: 2000g

  • Shipping port: Xiamen

  • Warranty: 12 months

Woodward 9905-864 Peak 150 Control Module

Description

The Woodward 9905-864 is a microprocessor-based control module designed for speed and load regulation in industrial engines or turbines, featuring configurable inputs/outputs and hazardous environment compliance (NEMA 4X).

Features

  • Multi-Function I/O: Supports power supply, analog/digital signals, speed sensors, and communication interfaces.
  • Relay Configuration: Two dedicated and two user-configurable relays for trip/alarm functions.
  • Speed Control: Integrates magnetic pickup inputs for precise speed sensing (up to 15,000 rpm).
  • Communication Options: Optional Modbus RTU and a service port for handheld programmers.
  • Hazardous Environment Ready: Sealed enclosure with NEMA 4X rating for rugged industrial use.

Technical Specifications

  • Power Supply:
    • Input: 90–150 Vdc or 88–132 Vac (47–63 Hz) for ac/dc version.
    • Consumption: Max. 38 W.
    • Operation: No power switch; active when powered (reset at +5 Vdc < 4.7 V).
  • Discrete Inputs:
    • Quantity: 8 isolated inputs (e.g., speed control, start/reset, remote enable).
    • Power: Internal 24 Vdc or external 5–28 Vdc.
  • Discrete Outputs:
    • Relays: 4 hermetically sealed (2 dedicated, 2 configurable as trip/alarm).
    • Ratings: 2 A resistive @ 28 Vdc / 0.3 A resistive @ 115 Vac (interposing relay for higher loads).
    • Contacts: Normally open/closed via internal jumpers.
  • Analog Input:
    • Type: Remote speed setting (4–20 mA or 1–5 Vdc, jumper-selectable).
    • Load: 250 Ω (for 4–20 mA).
  • Analog Outputs:
    • Speed Readout: 4–20 mA or 0–1 mA (jumper-selectable, max. load 600 Ω).
    • User Configurable: Same as speed readout.
    • Actuator Output: 0–200 mA (max. load 60 Ω) or 0–20 mA (max. load 450 Ω).
  • Speed Sensor Inputs:
    • Quantity: 2 magnetic pickup inputs.
    • Signal Requirements: Min. 1 Vrms, 200 Hz–15 kHz (max. speed 15,000 rpm).
    • Cabling: Shielded cable (grounded at control only).
  • Communication:
    • Modbus RTU: Optional (requires terminal installation, refer to Figure 4-5).
    • Service Port: Dedicated for handheld programmer.
  • Physical & Environmental:
    • Enclosure: NEMA 4X (dust/water-resistant).
    • Wiring: Passes through bottom ports; terminal block connections.
    • Explosion Hazard: Do not open in hazardous atmospheres (sparking internal connections).
Sipariş ve Garanti Bilgileri

Satın Alma ve İade Şartları

Minimum sipariş miktarı, teslimat süreleri, ödeme seçenekleri, garanti ve iade politikaları hakkında ayrıntılı yönergeler.

Şimdi kontrol edin

Toplu siparişleri memnuniyetle kabul ediyoruz, minimum sipariş miktarı sadece bir birimdir.

Talep üzerine, Menşei/Uygunluk Sertifikaları ve diğer gerekli ihracat belgeleri dahil olmak üzere tüm gerekli belgeleri sağlayabiliriz.

Gönderimden önce %100 T/T (Telegraphic Transfer) ödemesini kabul ediyoruz. Teslim süreleri olan ürünler için, önceden %30 depozito gereklidir, kalan %70 ise gönderimden önce ödenmelidir. RMB transferleri için, Çin'de bir acenteniz varsa lütfen bizimle iletişime geçin.

Tüm yeni ve orijinal ürünler, standart bir yıllık garanti ile birlikte gelir. Uzatılmış garanti seçenekleri için fiyat detayları için bizimle iletişime geçmekten çekinmeyin.

Müşteri memnuniyetinizi öncelikli olarak değerlendiriyoruz. Bir ürünü iade etmeniz gerekiyorsa, bu işlemin satın alma tarihinden itibaren 30 gün içinde yapılması gerekmektedir. Ürün kullanılmamış, açılmamış ve tüm aksesuarlarıyla birlikte orijinal ambalajında olmalıdır. İade alındıktan sonra geri ödemeler 5-7 iş günü içinde işleme alınacaktır. Lütfen dikkat edin, nakliye ve işleme ücretleri iade edilemez.
Şimdi kontrol edin

Ürün karşılaştırması

Woodward|9905-864|Peak 150 Control Module
Woodward|9905-864|Peak 150 Control Module
Woodward|9905-864|Peak 150 Control Module
Güncel ürün Akım
Woodward

Woodward|9905-864|Peak 150 Control Module

Seçenekler
Stokta var
Açıklamalar

Woodward 9905-864 Peak 150 Control Module

Description

The Woodward 9905-864 is a microprocessor-based control module designed for speed and load regulation in industrial engines or turbines, featuring configurable inputs/outputs and hazardous environment compliance (NEMA 4X).

Features

  • Multi-Function I/O: Supports power supply, analog/digital signals, speed sensors, and communication interfaces.
  • Relay Configuration: Two dedicated and two user-configurable relays for trip/alarm functions.
  • Speed Control: Integrates magnetic pickup inputs for precise speed sensing (up to 15,000 rpm).
  • Communication Options: Optional Modbus RTU and a service port for handheld programmers.
  • Hazardous Environment Ready: Sealed enclosure with NEMA 4X rating for rugged industrial use.

Technical Specifications

  • Power Supply:
    • Input: 90–150 Vdc or 88–132 Vac (47–63 Hz) for ac/dc version.
    • Consumption: Max. 38 W.
    • Operation: No power switch; active when powered (reset at +5 Vdc < 4.7 V).
  • Discrete Inputs:
    • Quantity: 8 isolated inputs (e.g., speed control, start/reset, remote enable).
    • Power: Internal 24 Vdc or external 5–28 Vdc.
  • Discrete Outputs:
    • Relays: 4 hermetically sealed (2 dedicated, 2 configurable as trip/alarm).
    • Ratings: 2 A resistive @ 28 Vdc / 0.3 A resistive @ 115 Vac (interposing relay for higher loads).
    • Contacts: Normally open/closed via internal jumpers.
  • Analog Input:
    • Type: Remote speed setting (4–20 mA or 1–5 Vdc, jumper-selectable).
    • Load: 250 Ω (for 4–20 mA).
  • Analog Outputs:
    • Speed Readout: 4–20 mA or 0–1 mA (jumper-selectable, max. load 600 Ω).
    • User Configurable: Same as speed readout.
    • Actuator Output: 0–200 mA (max. load 60 Ω) or 0–20 mA (max. load 450 Ω).
  • Speed Sensor Inputs:
    • Quantity: 2 magnetic pickup inputs.
    • Signal Requirements: Min. 1 Vrms, 200 Hz–15 kHz (max. speed 15,000 rpm).
    • Cabling: Shielded cable (grounded at control only).
  • Communication:
    • Modbus RTU: Optional (requires terminal installation, refer to Figure 4-5).
    • Service Port: Dedicated for handheld programmer.
  • Physical & Environmental:
    • Enclosure: NEMA 4X (dust/water-resistant).
    • Wiring: Passes through bottom ports; terminal block connections.
    • Explosion Hazard: Do not open in hazardous atmospheres (sparking internal connections).