Honeywell|MU-TDOD13| 24 Vdc Digital Output Field Termination Assembly
Honeywell MU-TDOD13 Description
The Honeywell MU-TDOD13 is a 24 Vdc Digital Output Field Termination Assembly (FTA) designed to drive up to 16 intrinsically safe loads, such as solenoids or alarms, in hazardous areas.
Features
- Supports 16 digital output channels
- Intrinsically safe for hazardous environments
- Galvanic isolation for enhanced safety
- Line fault detection for reliable operation
Technical Specifications
Output Characteristics
- Maximum output voltage: 25.5 Vdc
- Output impedance: 232 ohms
- Minimum output voltage: 22 V at 0 mA, 10 V at 50 mA
- Maximum output current: 110 mA per channel
Power Consumption
- Current draw: 1.10 A at 25 Vdc (all outputs active, 350 ohm load)
- Power dissipation: 18.7 W (all outputs active)
Isolation and Safety
- Isolation voltage: 250 Vac between safe and hazardous sides
- Safety parameters per channel: 25.5 V max, 232 ohms, 110 mA max
Connectors
- Two 50-pin connectors for IOP interface (redundancy not supported)
- One 50-pin auxiliary connector for line fault detection signals
Indicators
- Green LED: Primary IOP control
- Green LED per module: Power status
- Amber LED per module: Output active
- Red LED per module: Line fault detected
Environmental
- Ambient temperature limits: Suitable for Division 2 hazardous locations
Honeywell|MU-TDOD13| 24 Vdc Digital Output Field Termination Assembly



Honeywell|MU-TDOD13| 24 Vdc Digital Output Field Termination Assembly
Honeywell MU-TDOD13 Description
The Honeywell MU-TDOD13 is a 24 Vdc Digital Output Field Termination Assembly (FTA) designed to drive up to 16 intrinsically safe loads, such as solenoids or alarms, in hazardous areas.
Features
- Supports 16 digital output channels
- Intrinsically safe for hazardous environments
- Galvanic isolation for enhanced safety
- Line fault detection for reliable operation
Technical Specifications
Output Characteristics
- Maximum output voltage: 25.5 Vdc
- Output impedance: 232 ohms
- Minimum output voltage: 22 V at 0 mA, 10 V at 50 mA
- Maximum output current: 110 mA per channel
Power Consumption
- Current draw: 1.10 A at 25 Vdc (all outputs active, 350 ohm load)
- Power dissipation: 18.7 W (all outputs active)
Isolation and Safety
- Isolation voltage: 250 Vac between safe and hazardous sides
- Safety parameters per channel: 25.5 V max, 232 ohms, 110 mA max
Connectors
- Two 50-pin connectors for IOP interface (redundancy not supported)
- One 50-pin auxiliary connector for line fault detection signals
Indicators
- Green LED: Primary IOP control
- Green LED per module: Power status
- Amber LED per module: Output active
- Red LED per module: Line fault detected
Environmental
- Ambient temperature limits: Suitable for Division 2 hazardous locations