GE Fanuc|IC693PWR322|Standard Power Supply Module
GE Fanuc IC693PWR322 Standard Power Supply Module
Description
GE Fanuc IC693PWR322 is a 24/48 VDC standard power supply for GE Series 90-30 PLC systems, delivering 30 W total output with three isolated voltage rails.
Features
- Auto-ranging input for 24 VDC or 48 VDC nominal operation
- No jumper configuration required
- Built-in overcurrent and short-circuit protection
- Provides isolated outputs for I/O and relay modules
Technical Specifications
-
Input Voltage:
- Nominal: 24 or 48 VDC
- Range: 21–56 VDC (start), 18–56 VDC (run)
- Input Power: 50 W maximum at full load
- Inrush Current: 4 A peak (≤100 ms)
- Holdup Time: Minimum 14 ms
- Total Output Power: 30 W maximum
-
Output Voltages:
- +5 VDC: 5.0–5.2 V (nominal 5.1 V), up to 15 W
- +24 VDC Relay: 24–28 V, up to 15 W (powers relay output modules)
- +24 VDC Isolated: 21.5–28 V, up to 20 W (powers input modules)
-
Protection:
- Overvoltage: 6.4–7 V on +5 VDC output
- Overcurrent: 4 A maximum on +5 VDC output
- Mounting: Leftmost slot on IC693 PLC baseplate
- Communication: RS-485 serial port
GE Fanuc|IC693PWR322|Standard Power Supply Module
GE Fanuc|IC693PWR322|Standard Power Supply Module
GE Fanuc IC693PWR322 Standard Power Supply Module
Description
GE Fanuc IC693PWR322 is a 24/48 VDC standard power supply for GE Series 90-30 PLC systems, delivering 30 W total output with three isolated voltage rails.
Features
- Auto-ranging input for 24 VDC or 48 VDC nominal operation
- No jumper configuration required
- Built-in overcurrent and short-circuit protection
- Provides isolated outputs for I/O and relay modules
Technical Specifications
-
Input Voltage:
- Nominal: 24 or 48 VDC
- Range: 21–56 VDC (start), 18–56 VDC (run)
- Input Power: 50 W maximum at full load
- Inrush Current: 4 A peak (≤100 ms)
- Holdup Time: Minimum 14 ms
- Total Output Power: 30 W maximum
-
Output Voltages:
- +5 VDC: 5.0–5.2 V (nominal 5.1 V), up to 15 W
- +24 VDC Relay: 24–28 V, up to 15 W (powers relay output modules)
- +24 VDC Isolated: 21.5–28 V, up to 20 W (powers input modules)
-
Protection:
- Overvoltage: 6.4–7 V on +5 VDC output
- Overcurrent: 4 A maximum on +5 VDC output
- Mounting: Leftmost slot on IC693 PLC baseplate
- Communication: RS-485 serial port
