1 2

GE Fanuc|IS200VVIBH1CAC|Vibration Monitor Input Module
SKU: IS200VVIBH1CAC

  • Manufacturer: GE Fanuc

  • Product No.: IS200VVIBH1CAC

  • Condition：Em estoque

  • Product Type: Vibration Monitor Input Module

  • Product Origin: USA

  • Payment:T/T, Western Union

  • Weight: 560g

  • Shipping port: Xiamen

  • Warranty: 12 months

GE Fanuc IS200VVIBH1CAC Vibration Monitor Input Module
Description
The GE Fanuc IS200VVIBH1CAC is a specialized Vibration Monitor Input module designed for the Mark VI control system to acquire and process critical vibration data from turbine proximity probes and seismic sensors.
Features
  • High-resolution vibration signal processing
  • Integrated probe excitation and conditioning
  • Real-time diagnostic and fault detection
  • Hot-swappable design for continuous operation
Technical Specifications
  • System Compatibility: GE Speedtronics Mark VI Distributed Control System
  • Module Type: Vibration Monitor Input (VVI)
  • Input Channels: 8 independent vibration input channels
  • Sensor Compatibility: Eddy current proximity probes and seismic sensors
  • Probe Excitation Voltage: -24 VDC nominal (configurable -18 VDC to -24 VDC)
  • Signal Frequency Range: 0.5 Hz to 10,000 Hz bandwidth
  • Resolution: 24-bit analog-to-digital conversion
  • Accuracy: ±0.5% of full scale at 25°C
  • Sampling Rate: Up to 20,000 samples per second per channel
  • Input Impedance: 100 kΩ minimum
  • Operating Temperature: -30°C to +65°C ambient range
  • Storage Temperature: -40°C to +85°C non-operating
  • Relative Humidity: 5% to 95% non-condensing
  • Isolation Voltage: 500 VAC RMS channel-to-ground
  • Power Consumption: 15 Watts typical at full load
  • Supply Voltage: 28 VDC nominal input (range 18-32 VDC)
  • Connector Interface: DC-37 pin male connector with locking mechanism
  • MTBF: Over 120,000 hours calculated mean time between failures
  • Dimensions: 16.5 cm height by 12.0 cm depth standard form factor
  • Weight: Approximately 0.50 kilograms per unit
  • Mounting Style: Backplane slot installation with guide rails
  • LED Indicators: Channel status, module fault, and communication lights
  • Certification: UL, CE, and CSA approved for hazardous locations
Informação sobre Pedidos e Garantias

Termos de Compra e Devoluções

Diretrizes detalhadas sobre quantidade mínima de pedido, prazos de entrega, opções de pagamento, garantia e políticas de devolução.

Ver agora

Aceitamos pedidos em grandes quantidades, com quantidade mínima de pedido de apenas uma unidade.

Mediante solicitação, podemos fornecer todos os documentos necessários, incluindo Certificados de Origem/Conformidade e outros documentos de exportação necessários.

Aceitamos pagamento de 100% T/T (transferência telegráfica) antes do envio. Para itens com prazo de entrega, é necessário um depósito antecipado de 30%, sendo os 70% restantes pagos antes do envio. Para transferências em RMB, entre em contato conosco se tiver um agente na China.

Todos os itens novos e originais vêm com garantia padrão de um ano. Para opções de garantia estendida, sinta-se à vontade para entrar em contato conosco para obter detalhes de preços.

Priorizamos a sua satisfação. Se precisar devolver um item, isso deverá ser feito no prazo de 30 dias após a compra. O produto deve estar sem uso, fechado e em sua embalagem original, incluindo todos os acessórios. Os reembolsos serão processados ​​dentro de 5 a 7 dias úteis após o recebimento da devolução. Observe que as despesas de envio e manuseio não são reembolsáveis.
Ver agora

Comparação de Produto

GE Fanuc|IS200VVIBH1CAC|Vibration Monitor Input Module
GE Fanuc|IS200VVIBH1CAC|Vibration Monitor Input Module
Produto atual Atual
GE Fanuc

GE Fanuc|IS200VVIBH1CAC|Vibration Monitor Input Module

Opções
Em estoque
Descrições
GE Fanuc IS200VVIBH1CAC Vibration Monitor Input Module
Description
The GE Fanuc IS200VVIBH1CAC is a specialized Vibration Monitor Input module designed for the Mark VI control system to acquire and process critical vibration data from turbine proximity probes and seismic sensors.
Features
  • High-resolution vibration signal processing
  • Integrated probe excitation and conditioning
  • Real-time diagnostic and fault detection
  • Hot-swappable design for continuous operation
Technical Specifications
  • System Compatibility: GE Speedtronics Mark VI Distributed Control System
  • Module Type: Vibration Monitor Input (VVI)
  • Input Channels: 8 independent vibration input channels
  • Sensor Compatibility: Eddy current proximity probes and seismic sensors
  • Probe Excitation Voltage: -24 VDC nominal (configurable -18 VDC to -24 VDC)
  • Signal Frequency Range: 0.5 Hz to 10,000 Hz bandwidth
  • Resolution: 24-bit analog-to-digital conversion
  • Accuracy: ±0.5% of full scale at 25°C
  • Sampling Rate: Up to 20,000 samples per second per channel
  • Input Impedance: 100 kΩ minimum
  • Operating Temperature: -30°C to +65°C ambient range
  • Storage Temperature: -40°C to +85°C non-operating
  • Relative Humidity: 5% to 95% non-condensing
  • Isolation Voltage: 500 VAC RMS channel-to-ground
  • Power Consumption: 15 Watts typical at full load
  • Supply Voltage: 28 VDC nominal input (range 18-32 VDC)
  • Connector Interface: DC-37 pin male connector with locking mechanism
  • MTBF: Over 120,000 hours calculated mean time between failures
  • Dimensions: 16.5 cm height by 12.0 cm depth standard form factor
  • Weight: Approximately 0.50 kilograms per unit
  • Mounting Style: Backplane slot installation with guide rails
  • LED Indicators: Channel status, module fault, and communication lights
  • Certification: UL, CE, and CSA approved for hazardous locations