GE Fanuc|IC200ALG264E|15-Bit Current Analog Input Module
GE Fanuc IC200ALG264 Module - 15-Bit Current Analog Input
Description
GE Fanuc IC200ALG264 is a 15-channel, single-ended, 15-bit current analog input module for the Versamax series, powered via backplane.
Features
- 15 single-ended analog input channels with common return
- Backplane-powered – no external power required for module operation
- Jumper-selectable input ranges: 4–20mA or 0–20mA
- Open-wire fault detection per channel (4–20mA mode only)
- Reports internal power loss on field-side circuits
- Software-configurable default or hold-last-state operation on power loss
- Green LED indicates backplane and field power status
Technical Specifications
- Number of Channels: 15 single-ended, one group
- Current Input Ranges: 4–20 mA, 0–20 mA (group jumper configurable)
- Resolution: 15-bit
- Update Rate: 7.5 ms for full channel group
- Input Filter Response: 24 Hz ±20%
- Power Consumption: 100 mA from +5V backplane bus
- Voltage Range: Not applicable
- Wiring: Shielded twisted pair cable required
-
Shield Grounding:
- Preferred: At source device
- Alternative: At I/O module using auxiliary I/O terminal
GE Fanuc|IC200ALG264E|15-Bit Current Analog Input Module



GE Fanuc|IC200ALG264E|15-Bit Current Analog Input Module
GE Fanuc IC200ALG264 Module - 15-Bit Current Analog Input
Description
GE Fanuc IC200ALG264 is a 15-channel, single-ended, 15-bit current analog input module for the Versamax series, powered via backplane.
Features
- 15 single-ended analog input channels with common return
- Backplane-powered – no external power required for module operation
- Jumper-selectable input ranges: 4–20mA or 0–20mA
- Open-wire fault detection per channel (4–20mA mode only)
- Reports internal power loss on field-side circuits
- Software-configurable default or hold-last-state operation on power loss
- Green LED indicates backplane and field power status
Technical Specifications
- Number of Channels: 15 single-ended, one group
- Current Input Ranges: 4–20 mA, 0–20 mA (group jumper configurable)
- Resolution: 15-bit
- Update Rate: 7.5 ms for full channel group
- Input Filter Response: 24 Hz ±20%
- Power Consumption: 100 mA from +5V backplane bus
- Voltage Range: Not applicable
- Wiring: Shielded twisted pair cable required
-
Shield Grounding:
- Preferred: At source device
- Alternative: At I/O module using auxiliary I/O terminal