YOKOGAWA KS1-20*B System Cables
The Yokogawa KS1-20*B , also cataloged as the KS1 Signal Cable, operates as a dedicated hardware component for multi-channel I/O signal interconnectivity within Yokogawa control network platforms.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | KS1-20*B |
| Brand | Yokogawa |
| Origin | Japan |
| Weight | 2.0 kg |
| Dimensions | Up to 20 m cable length |
| Operating Temp | -20 deg C to +70 deg C |
| Power Consumption | Passive signal cable assembly |
| Cable Type | 40-pin to 40-pin signal cable |
| Connector Style | Style B (*B) |
DCS Signal Conditioning & Field Loop Protocol Features
The KS1-20*B cable assembly utilizes high-density shielded multi-conductor wiring designed to transfer low-level analog and discrete digital signals between terminal boards and system I/O modules without signal loss over long cable runs. The internal wire pairs maintain consistent characteristic impedance to support 4-20 mA HART loop protocol pass-through and Foundation Fieldbus high-frequency digital telemetry. Standardized pinout geometry preserves channel-to-channel isolation and crosstalk suppression across high-density I/O racks, ensuring reliable signal conversion across process automation nodes.
Frequently Asked Questions
Q: What is the maximum operating temperature limit for the KS1-20B cable assembly?
A: The KS1-20B cable is rated for continuous operation within ambient temperature environments ranging from -20 deg C to +70 deg C.
Q: What connector pin configuration does the KS1-20*B interface utilize?
A: The cable features a 40-pin to 40-pin connector layout built to Yokogawa Style B (*B) manufacturing specifications.
Field Installation Guidelines
- Inspect connector pins for mechanical alignment or bending prior to mating the 40-pin header to terminal blocks or I/O cards.
- Secure the connector retaining screws hand-tight to maintain solid electrical engagement and prevent signal loss from vibration.
- Observe minimum bend radius limits along the 20-meter cable length to avoid internal wire fatigue or shield degradation.
- Route the signal cable through dedicated low-voltage instrument trays, maintaining adequate separation from AC power lines.
YOKOGAWA KS1-20*B System Cables
YOKOGAWA KS1-20*B System Cables
The Yokogawa KS1-20*B , also cataloged as the KS1 Signal Cable, operates as a dedicated hardware component for multi-channel I/O signal interconnectivity within Yokogawa control network platforms.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | KS1-20*B |
| Brand | Yokogawa |
| Origin | Japan |
| Weight | 2.0 kg |
| Dimensions | Up to 20 m cable length |
| Operating Temp | -20 deg C to +70 deg C |
| Power Consumption | Passive signal cable assembly |
| Cable Type | 40-pin to 40-pin signal cable |
| Connector Style | Style B (*B) |
DCS Signal Conditioning & Field Loop Protocol Features
The KS1-20*B cable assembly utilizes high-density shielded multi-conductor wiring designed to transfer low-level analog and discrete digital signals between terminal boards and system I/O modules without signal loss over long cable runs. The internal wire pairs maintain consistent characteristic impedance to support 4-20 mA HART loop protocol pass-through and Foundation Fieldbus high-frequency digital telemetry. Standardized pinout geometry preserves channel-to-channel isolation and crosstalk suppression across high-density I/O racks, ensuring reliable signal conversion across process automation nodes.
Frequently Asked Questions
Q: What is the maximum operating temperature limit for the KS1-20B cable assembly?
A: The KS1-20B cable is rated for continuous operation within ambient temperature environments ranging from -20 deg C to +70 deg C.
Q: What connector pin configuration does the KS1-20*B interface utilize?
A: The cable features a 40-pin to 40-pin connector layout built to Yokogawa Style B (*B) manufacturing specifications.
Field Installation Guidelines
- Inspect connector pins for mechanical alignment or bending prior to mating the 40-pin header to terminal blocks or I/O cards.
- Secure the connector retaining screws hand-tight to maintain solid electrical engagement and prevent signal loss from vibration.
- Observe minimum bend radius limits along the 20-meter cable length to avoid internal wire fatigue or shield degradation.
- Route the signal cable through dedicated low-voltage instrument trays, maintaining adequate separation from AC power lines.
