Yokogawa F3YC08-0C Digital Output Module
Configured for discrete load actuation and relay contact switching in FA-M3 Range-free Multi-controller architectures, the Yokogawa F3YC08-0C ( F3YC08 Digital Output Module) provides direct physical/electrical execution. It serves as the primary F3YC08 Digital Output Module utilized to execute relay signal control across Yokogawa PLC platforms.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | F3YC08-0C |
| Brand | Yokogawa |
| Origin | Japan |
| Weight | 205 g |
| Dimensions | Standard FA-M3 I/O Card Footprint |
| Operating Temp | 0 deg C to 55 deg C |
| Power Consumption | Backplane logic bus powered |
| Module Type | Digital Relay Output Module |
| Output Points | 8 independent relay contacts |
| Rated Load Voltage | 5-24 VDC / 100-240 VAC |
| Maximum Load Current | 2 A per point |
| Connection Interface | 18-point screw terminal block |
DCS Signal Conditioning & Field Loop Protocol Features
The F3YC08-0C relay output module provides mechanical galvanically-isolated contact paths between internal controller backplane logic and external field devices. Built with isolated commons across its 8 relay output channels, the module allows simultaneous switching of mixed AC and DC voltage supply rails. This isolated architecture prevents high-voltage switching transients and inductive noise from coupling into system backplane communications, supporting interlocking execution across discrete motor starters, solenoids, and standard 4-20 mA HART loop protocol instrument networks.
Frequently Asked Questions
Q: Does the F3YC08-0C output module support both AC and DC load voltage switching on the same card?
A: Yes, the module features isolated commons allowing output channels to control both 5-24 VDC and 100-240 VAC loads across its 8 independent points.
Q: What is the maximum current capacity per relay contact on the F3YC08-0C?
A: Each individual relay output channel is rated for a maximum continuous load current of 2 A.
Field Installation Guidelines
- Turn off all system base unit backplane power and external load power supplies prior to installing or removing the F3YC08-0C module.
- Seat the module edge connector into the FA-M3 base slot and secure the retention frame using M4 mounting screws.
- Terminate load wiring to the 18-point screw terminal block, ensuring correct torque is applied to terminal connections.
- Install suppression devices (snubbers or flyback diodes) across external inductive loads to extend contact life and prevent high-voltage arcing.
Yokogawa F3YC08-0C Digital Output Module
Yokogawa F3YC08-0C Digital Output Module
Configured for discrete load actuation and relay contact switching in FA-M3 Range-free Multi-controller architectures, the Yokogawa F3YC08-0C ( F3YC08 Digital Output Module) provides direct physical/electrical execution. It serves as the primary F3YC08 Digital Output Module utilized to execute relay signal control across Yokogawa PLC platforms.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | F3YC08-0C |
| Brand | Yokogawa |
| Origin | Japan |
| Weight | 205 g |
| Dimensions | Standard FA-M3 I/O Card Footprint |
| Operating Temp | 0 deg C to 55 deg C |
| Power Consumption | Backplane logic bus powered |
| Module Type | Digital Relay Output Module |
| Output Points | 8 independent relay contacts |
| Rated Load Voltage | 5-24 VDC / 100-240 VAC |
| Maximum Load Current | 2 A per point |
| Connection Interface | 18-point screw terminal block |
DCS Signal Conditioning & Field Loop Protocol Features
The F3YC08-0C relay output module provides mechanical galvanically-isolated contact paths between internal controller backplane logic and external field devices. Built with isolated commons across its 8 relay output channels, the module allows simultaneous switching of mixed AC and DC voltage supply rails. This isolated architecture prevents high-voltage switching transients and inductive noise from coupling into system backplane communications, supporting interlocking execution across discrete motor starters, solenoids, and standard 4-20 mA HART loop protocol instrument networks.
Frequently Asked Questions
Q: Does the F3YC08-0C output module support both AC and DC load voltage switching on the same card?
A: Yes, the module features isolated commons allowing output channels to control both 5-24 VDC and 100-240 VAC loads across its 8 independent points.
Q: What is the maximum current capacity per relay contact on the F3YC08-0C?
A: Each individual relay output channel is rated for a maximum continuous load current of 2 A.
Field Installation Guidelines
- Turn off all system base unit backplane power and external load power supplies prior to installing or removing the F3YC08-0C module.
- Seat the module edge connector into the FA-M3 base slot and secure the retention frame using M4 mounting screws.
- Terminate load wiring to the 18-point screw terminal block, ensuring correct torque is applied to terminal connections.
- Install suppression devices (snubbers or flyback diodes) across external inductive loads to extend contact life and prevent high-voltage arcing.
