Yokogawa AIP601 Door Fan Unit
The Yokogawa AIP601, also cataloged as the AIP601 Door Fan Unit, operates as a dedicated hardware component for enclosure thermal management and forced-air cooling within Yokogawa Centum VP platforms.
Suffix Breakdown & Model Matrix
- AIP: System hardware auxiliary and cabinet accessory module designation for Yokogawa control infrastructure.
- 601: Specific door-mounted forced-air fan assembly model code with embedded cooling controls.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | AIP601 |
| Brand | Yokogawa |
| Origin | Japan |
| Weight | 8.00 kg (17.64 lbs) |
| Dimensions | Standard Yokogawa cabinet door cutout footprint |
| Operating Temp | 0 to 50 deg C |
| Power Consumption | 250 VAC / 30 VDC rated input |
| Vnet/IP Interface | Dual-redundant network support |
| Battery Backup | Up to 72 hours for main memory retention |
| Flow Rate Range | 2 to 20 m3/min detectable airflow range |
| Unit Capacity | Supports 1 FCU, 1 HKU Power Distribution Board, and up to 6 I/O modules |
Process Control and DCS Instrumentation
The Yokogawa AIP601 provides active enclosure cooling and hardware monitoring integrated directly with DCS cabinet health diagnostics. Connected across Vnet/IP dual-redundant networks, the unit reports airflow status across its 2 to 20 m3/min detection range to prevent thermal degradation of central FCU and field I/O electronics. Featuring galvanic isolation and channel-to-channel isolation principles across internal power distribution paths, the module ensures continuous operation of critical process controllers during severe ambient temperature fluctuations.
Frequently Asked Questions
Q: What is the main memory battery backup retention period on the AIP601 unit?
A: The integrated memory battery backup supports system retention for a maximum duration of 72 hours under full charge conditions.
Q: How does the AIP601 communicate fan failure or airflow degradation to the control system?
A: The fan unit monitors internal flow rates within 2 to 20 m3/min and transmits diagnostic status over the dual-redundant Vnet/IP network to the host station.
Field Installation Guidelines
- Isolate main cabinet AC/DC distribution power prior to mounting or servicing the door fan panel.
- Cut and frame cabinet door mounting apertures according to Yokogawa AIP601 clearance dimensions.
- Secure the fan housing to the enclosure door using oil-resistant gaskets to maintain enclosure IP ratings.
- Route power supply lines through dedicated wire ducting separate from low-voltage signal cabling.
- Ground the metallic fan housing frame directly to the cabinet earth bus bar using a heavy gauge copper conductor.
Yokogawa AIP601 Door Fan Unit
Yokogawa AIP601 Door Fan Unit
The Yokogawa AIP601, also cataloged as the AIP601 Door Fan Unit, operates as a dedicated hardware component for enclosure thermal management and forced-air cooling within Yokogawa Centum VP platforms.
Suffix Breakdown & Model Matrix
- AIP: System hardware auxiliary and cabinet accessory module designation for Yokogawa control infrastructure.
- 601: Specific door-mounted forced-air fan assembly model code with embedded cooling controls.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | AIP601 |
| Brand | Yokogawa |
| Origin | Japan |
| Weight | 8.00 kg (17.64 lbs) |
| Dimensions | Standard Yokogawa cabinet door cutout footprint |
| Operating Temp | 0 to 50 deg C |
| Power Consumption | 250 VAC / 30 VDC rated input |
| Vnet/IP Interface | Dual-redundant network support |
| Battery Backup | Up to 72 hours for main memory retention |
| Flow Rate Range | 2 to 20 m3/min detectable airflow range |
| Unit Capacity | Supports 1 FCU, 1 HKU Power Distribution Board, and up to 6 I/O modules |
Process Control and DCS Instrumentation
The Yokogawa AIP601 provides active enclosure cooling and hardware monitoring integrated directly with DCS cabinet health diagnostics. Connected across Vnet/IP dual-redundant networks, the unit reports airflow status across its 2 to 20 m3/min detection range to prevent thermal degradation of central FCU and field I/O electronics. Featuring galvanic isolation and channel-to-channel isolation principles across internal power distribution paths, the module ensures continuous operation of critical process controllers during severe ambient temperature fluctuations.
Frequently Asked Questions
Q: What is the main memory battery backup retention period on the AIP601 unit?
A: The integrated memory battery backup supports system retention for a maximum duration of 72 hours under full charge conditions.
Q: How does the AIP601 communicate fan failure or airflow degradation to the control system?
A: The fan unit monitors internal flow rates within 2 to 20 m3/min and transmits diagnostic status over the dual-redundant Vnet/IP network to the host station.
Field Installation Guidelines
- Isolate main cabinet AC/DC distribution power prior to mounting or servicing the door fan panel.
- Cut and frame cabinet door mounting apertures according to Yokogawa AIP601 clearance dimensions.
- Secure the fan housing to the enclosure door using oil-resistant gaskets to maintain enclosure IP ratings.
- Route power supply lines through dedicated wire ducting separate from low-voltage signal cabling.
- Ground the metallic fan housing frame directly to the cabinet earth bus bar using a heavy gauge copper conductor.
