Yokogawa 6500-PS7TS Operator Interface
The Yokogawa 6500-PS7TS serves as the primary 6500-PS7TS Operator Interface utilized to execute localized process visualization across Yokogawa HMI platforms.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 6500-PS7TS |
| Brand | Yokogawa |
| Origin | Japan |
| Weight | 8.76 kg (19.32 lbs) |
| Dimensions | Pro Set 700 standard panel enclosure size |
| Operating Temp | 0 deg C to +50 deg C |
| Power Consumption | 24 VDC / 100-240 VAC system dependent |
| Display Type | TFT Color LCD |
| Series | Pro Set 700 |
| Touch Panel | Resistive Touch Screen (Replacement Part: PRO-SET700-REPLACEMENT) |
| System Category | HMI / Operator Interface Terminal |
Channel Isolation and Communication Loop Integration
The 6500-PS7TS terminal integrates isolated serial and Ethernet communication drivers to protect internal graphics microprocessors from common-mode voltage spikes on plant communication lines. Galvanic isolation across RS-422/RS-485 and fieldbus interfaces eliminates ground loop interference when polling remote I/O devices or 4-20 mA HART transmitters. Built-in signal noise filtering ensures reliable data throughput between the HMI and upstream CENTUM DCS or FA-M3 PLC controllers, maintaining real-time alarm rendering and deterministic parameter input execution.
Frequently Asked Questions
Q: What panel replacement glass part is designated for the 6500-PS7TS touch interface?
A: The manufacturer-specified touch screen replacement glass assembly is cataloged under part number PRO-SET700-REPLACEMENT.
Q: How is chassis grounding managed to prevent static interference on the touch panel?
A: The metal enclosure features a rear earth ground terminal that must be connected directly to the control cabinet's primary grounding bar using a low-impedance conductor.
Field Installation Guidelines
- Cut the cabinet panel opening according to the Pro Set 700 enclosure template dimensions.
- Insert the 6500-PS7TS unit through the front panel cutout, ensuring the integrated rubber sealing gasket seats flush against the panel exterior.
- Install and tighten the rear panel mounting clamps evenly around the perimeter to achieve a dust-tight seal.
- Terminate protective earth (PE) directly to the chassis ground screw using a crimped ring terminal before attaching power wiring.
- Connect serial or Ethernet communication cables, verifying that shield drain wires are grounded at the cabinet entrance.
Yokogawa 6500-PS7TS Operator Interface
Yokogawa 6500-PS7TS Operator Interface
The Yokogawa 6500-PS7TS serves as the primary 6500-PS7TS Operator Interface utilized to execute localized process visualization across Yokogawa HMI platforms.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 6500-PS7TS |
| Brand | Yokogawa |
| Origin | Japan |
| Weight | 8.76 kg (19.32 lbs) |
| Dimensions | Pro Set 700 standard panel enclosure size |
| Operating Temp | 0 deg C to +50 deg C |
| Power Consumption | 24 VDC / 100-240 VAC system dependent |
| Display Type | TFT Color LCD |
| Series | Pro Set 700 |
| Touch Panel | Resistive Touch Screen (Replacement Part: PRO-SET700-REPLACEMENT) |
| System Category | HMI / Operator Interface Terminal |
Channel Isolation and Communication Loop Integration
The 6500-PS7TS terminal integrates isolated serial and Ethernet communication drivers to protect internal graphics microprocessors from common-mode voltage spikes on plant communication lines. Galvanic isolation across RS-422/RS-485 and fieldbus interfaces eliminates ground loop interference when polling remote I/O devices or 4-20 mA HART transmitters. Built-in signal noise filtering ensures reliable data throughput between the HMI and upstream CENTUM DCS or FA-M3 PLC controllers, maintaining real-time alarm rendering and deterministic parameter input execution.
Frequently Asked Questions
Q: What panel replacement glass part is designated for the 6500-PS7TS touch interface?
A: The manufacturer-specified touch screen replacement glass assembly is cataloged under part number PRO-SET700-REPLACEMENT.
Q: How is chassis grounding managed to prevent static interference on the touch panel?
A: The metal enclosure features a rear earth ground terminal that must be connected directly to the control cabinet's primary grounding bar using a low-impedance conductor.
Field Installation Guidelines
- Cut the cabinet panel opening according to the Pro Set 700 enclosure template dimensions.
- Insert the 6500-PS7TS unit through the front panel cutout, ensuring the integrated rubber sealing gasket seats flush against the panel exterior.
- Install and tighten the rear panel mounting clamps evenly around the perimeter to achieve a dust-tight seal.
- Terminate protective earth (PE) directly to the chassis ground screw using a crimped ring terminal before attaching power wiring.
- Connect serial or Ethernet communication cables, verifying that shield drain wires are grounded at the cabinet entrance.
