PanelView 1000 Standard | Allen-Bradley 2711-T10G3 Operator Terminal
Configured for process command input and display visualization in DH-485 networks, the Allen Bradley 2711-T10G3 (2711-T10G3 Operator Terminal) provides direct physical/electrical execution.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 2711-T10G3 |
| Brand | Allen Bradley |
| Origin | Not specified in technical documentation |
| Weight | 7.01 lbs (3.18 kg) |
| Dimensions | Standard PanelView 1000 physical chassis profile |
| Operating Temp | 0 to 55 deg C (32 to 131 deg F) |
| Power Consumption | Standard PanelView 1000 AC power requirements |
| Input Voltage Range | 100 to 240 VAC, 50/60 Hz |
| Display Type | Grayscale Active Matrix Thin-Film Resistor (TFT) |
| Display Size | 10.0 in. |
| Resolution | 640 x 480 pixels |
| Touch Input | Touchscreen interface |
| Communication Interfaces | DH-485, RS-232 (Printer port) |
| Enclosure Rating | NEMA Type 12, 13, or 4X (indoor use) |
Firmware Flash Compatibility and Deterministic Network Communication
The unit executes operational routines with firmware flash compatibility, allowing runtime system updates across network connections without physical module removal. High-speed token-passing deterministic network protocols on the native DH-485 interface ensure low-latency signal distribution and real-time polling between the terminal and target programmable automation controllers.
Frequently Asked Questions
Q: What input power configuration is required for the 2711-T10G3 operator terminal?
A: The terminal accepts line input voltages ranging from 100 to 240 VAC at an operating frequency of 50/60 Hz.
Q: What primary communication protocols and physical ports are integrated into this model?
A: The unit features an integrated DH-485 communication port for industrial network topology alongside an RS-232 serial port for alarm and event logging output.
Q: What are the physical display characteristics of the operator interface?
A: The terminal incorporates a 10-inch grayscale screen with a resolution of 640 x 480 pixels and an integrated touchscreen interface for direct input execution.
Field Installation Guidelines
- Panel Layout and Frame Mounting: Verify panel cutout dimensions before mounting. Insert the terminal into the cutout and tighten all mounting clamps evenly to secure the front gasket seal.
- Electrical Line Connection: Fasten 100 to 240 VAC line conductors securely to the power input terminal block and maintain a dedicated low-impedance earth ground connection to the chassis grounding point.
- Communication Cabling Discipline: Route DH-485 and RS-232 cables in grounded metal conduits separate from high-voltage AC lines to shield communication loops from electromagnetic noise.
PanelView 1000 Standard | Allen-Bradley 2711-T10G3 Operator Terminal
PanelView 1000 Standard | Allen-Bradley 2711-T10G3 Operator Terminal
Configured for process command input and display visualization in DH-485 networks, the Allen Bradley 2711-T10G3 (2711-T10G3 Operator Terminal) provides direct physical/electrical execution.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 2711-T10G3 |
| Brand | Allen Bradley |
| Origin | Not specified in technical documentation |
| Weight | 7.01 lbs (3.18 kg) |
| Dimensions | Standard PanelView 1000 physical chassis profile |
| Operating Temp | 0 to 55 deg C (32 to 131 deg F) |
| Power Consumption | Standard PanelView 1000 AC power requirements |
| Input Voltage Range | 100 to 240 VAC, 50/60 Hz |
| Display Type | Grayscale Active Matrix Thin-Film Resistor (TFT) |
| Display Size | 10.0 in. |
| Resolution | 640 x 480 pixels |
| Touch Input | Touchscreen interface |
| Communication Interfaces | DH-485, RS-232 (Printer port) |
| Enclosure Rating | NEMA Type 12, 13, or 4X (indoor use) |
Firmware Flash Compatibility and Deterministic Network Communication
The unit executes operational routines with firmware flash compatibility, allowing runtime system updates across network connections without physical module removal. High-speed token-passing deterministic network protocols on the native DH-485 interface ensure low-latency signal distribution and real-time polling between the terminal and target programmable automation controllers.
Frequently Asked Questions
Q: What input power configuration is required for the 2711-T10G3 operator terminal?
A: The terminal accepts line input voltages ranging from 100 to 240 VAC at an operating frequency of 50/60 Hz.
Q: What primary communication protocols and physical ports are integrated into this model?
A: The unit features an integrated DH-485 communication port for industrial network topology alongside an RS-232 serial port for alarm and event logging output.
Q: What are the physical display characteristics of the operator interface?
A: The terminal incorporates a 10-inch grayscale screen with a resolution of 640 x 480 pixels and an integrated touchscreen interface for direct input execution.
Field Installation Guidelines
- Panel Layout and Frame Mounting: Verify panel cutout dimensions before mounting. Insert the terminal into the cutout and tighten all mounting clamps evenly to secure the front gasket seal.
- Electrical Line Connection: Fasten 100 to 240 VAC line conductors securely to the power input terminal block and maintain a dedicated low-impedance earth ground connection to the chassis grounding point.
- Communication Cabling Discipline: Route DH-485 and RS-232 cables in grounded metal conduits separate from high-voltage AC lines to shield communication loops from electromagnetic noise.
