Output Module | Allen Bradley 1771-ODD
The Allen Bradley 1771-ODD is a 16-point Digital AC Output Module for the PLC 5 programmable controller platform. It provides isolated 120 V AC outputs for controlling external devices such as solenoids and transformers. The Series A module supports 1/2-slot, 1-slot, and 2-slot addressing, with individual output status indicators and blown-fuse indication.
Output Configuration and Operation
The 1771-ODD provides 16 isolated AC output points. Each output is controlled by its corresponding bit in the PLC data table, allowing the processor to determine the on/off state of connected field devices.
The module operates within an AC voltage range of 85-138 V and has a maximum continuous current rating of 2 A per output. The total current across the module must not exceed 8 A, so individual output ratings cannot all be used simultaneously at their maximum values.
Protection and Status Indication
The module incorporates surge suppression circuitry to limit high-voltage transients originating from the AC line. Optical coupling and filtering are also provided to reduce signal noise between the control logic and output circuitry.
There are 32 front-panel status indicators. Sixteen indicators on the left display the operating status of the individual outputs, while the 16 indicators on the right provide blown-fuse indications. These indicators help maintenance personnel identify output conditions during troubleshooting.
PLC 5 Integration and Installation
The 1771-ODD is designed for installation in a compatible 1771 I/O chassis containing a PLC processor. It supports 1/2-slot, 1-slot, and 2-slot addressing configurations and uses 16 image bits per module.
The module uses chassis keying bands to help prevent incorrect insertion. The specified keying positions are pins 4-6 on the lower connector and pins 30-32 on the upper connector. A removable field wiring arm is identified in the supplied documentation, but its exact part number requires confirmation.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | 1771-ODD |
| Brand | Allen Bradley |
| Product Line | PLC 5 |
| Module Type | Digital AC Output Module |
| Series | Series A |
| Number of Outputs | 16 |
| Output Type | Isolated AC Outputs |
| Voltage Category | 120 V AC |
| AC Operating Voltage | 85-138 V AC |
| Maximum Continuous Current per Output | 2 A |
| Maximum Current per Module | 8 A |
| Backplane Current | 420 mA |
| Data Format | BDC or Natural Binary |
| Addressing | 1/2-slot, 1-slot, and 2-slot |
| Typical AC Signal Delay (Off) | 45 ms (+/- 15 ms) |
| Typical DC Signal Delay (Off) | 50 ms |
| Maximum Signal Delay | 10.6 ms (Off-to-On and On-to-Off, as stated in description) |
| Maximum Power Dissipation | 14.2 W |
| Maximum Thermal Dissipation | 48.5 BTU/hr |
| Surge Suppression | Integrated |
| Signal Isolation | Optical Coupling |
| Status Indicators | 32 (16 output status and 16 blown-fuse indicators) |
| Mounting | 1771 I/O Chassis, Rack Mountable |
| Wiring Arm | 1771-WH / 1771-WN (requires confirmation) |
| UPC | 612598141890 |
| Weight | 1.50 lbs (0.68 kg) |
| Model Status | Earlier Model |
Frequently Asked Questions
Q: What is the primary function of the Allen Bradley 1771-ODD?
A: The 1771-ODD provides 16 isolated 120 V AC output points for controlling external devices. The PLC processor controls each output through its corresponding data table bit.
Q: Can all 16 outputs operate at 2 A simultaneously?
A: No. Although each output supports a maximum continuous current of 2 A, the total module current is limited to 8 A. The combined load must remain within this module-level rating.
Q: What should be checked when replacing a 1771-ODD module?
A: Verify the PLC 5 chassis configuration, addressing arrangement, connector keying positions, and field wiring arm part number. The supplied information identifies two different wiring arm numbers, 1771-WH and 1771-WN, which should be confirmed before ordering a replacement.
Output Module | Allen Bradley 1771-ODD
Output Module | Allen Bradley 1771-ODD
The Allen Bradley 1771-ODD is a 16-point Digital AC Output Module for the PLC 5 programmable controller platform. It provides isolated 120 V AC outputs for controlling external devices such as solenoids and transformers. The Series A module supports 1/2-slot, 1-slot, and 2-slot addressing, with individual output status indicators and blown-fuse indication.
Output Configuration and Operation
The 1771-ODD provides 16 isolated AC output points. Each output is controlled by its corresponding bit in the PLC data table, allowing the processor to determine the on/off state of connected field devices.
The module operates within an AC voltage range of 85-138 V and has a maximum continuous current rating of 2 A per output. The total current across the module must not exceed 8 A, so individual output ratings cannot all be used simultaneously at their maximum values.
Protection and Status Indication
The module incorporates surge suppression circuitry to limit high-voltage transients originating from the AC line. Optical coupling and filtering are also provided to reduce signal noise between the control logic and output circuitry.
There are 32 front-panel status indicators. Sixteen indicators on the left display the operating status of the individual outputs, while the 16 indicators on the right provide blown-fuse indications. These indicators help maintenance personnel identify output conditions during troubleshooting.
PLC 5 Integration and Installation
The 1771-ODD is designed for installation in a compatible 1771 I/O chassis containing a PLC processor. It supports 1/2-slot, 1-slot, and 2-slot addressing configurations and uses 16 image bits per module.
The module uses chassis keying bands to help prevent incorrect insertion. The specified keying positions are pins 4-6 on the lower connector and pins 30-32 on the upper connector. A removable field wiring arm is identified in the supplied documentation, but its exact part number requires confirmation.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | 1771-ODD |
| Brand | Allen Bradley |
| Product Line | PLC 5 |
| Module Type | Digital AC Output Module |
| Series | Series A |
| Number of Outputs | 16 |
| Output Type | Isolated AC Outputs |
| Voltage Category | 120 V AC |
| AC Operating Voltage | 85-138 V AC |
| Maximum Continuous Current per Output | 2 A |
| Maximum Current per Module | 8 A |
| Backplane Current | 420 mA |
| Data Format | BDC or Natural Binary |
| Addressing | 1/2-slot, 1-slot, and 2-slot |
| Typical AC Signal Delay (Off) | 45 ms (+/- 15 ms) |
| Typical DC Signal Delay (Off) | 50 ms |
| Maximum Signal Delay | 10.6 ms (Off-to-On and On-to-Off, as stated in description) |
| Maximum Power Dissipation | 14.2 W |
| Maximum Thermal Dissipation | 48.5 BTU/hr |
| Surge Suppression | Integrated |
| Signal Isolation | Optical Coupling |
| Status Indicators | 32 (16 output status and 16 blown-fuse indicators) |
| Mounting | 1771 I/O Chassis, Rack Mountable |
| Wiring Arm | 1771-WH / 1771-WN (requires confirmation) |
| UPC | 612598141890 |
| Weight | 1.50 lbs (0.68 kg) |
| Model Status | Earlier Model |
Frequently Asked Questions
Q: What is the primary function of the Allen Bradley 1771-ODD?
A: The 1771-ODD provides 16 isolated 120 V AC output points for controlling external devices. The PLC processor controls each output through its corresponding data table bit.
Q: Can all 16 outputs operate at 2 A simultaneously?
A: No. Although each output supports a maximum continuous current of 2 A, the total module current is limited to 8 A. The combined load must remain within this module-level rating.
Q: What should be checked when replacing a 1771-ODD module?
A: Verify the PLC 5 chassis configuration, addressing arrangement, connector keying positions, and field wiring arm part number. The supplied information identifies two different wiring arm numbers, 1771-WH and 1771-WN, which should be confirmed before ordering a replacement.
