Honeywell TP-DIKBTA-100 51196694-300 Industrial Keyboard
Configured for operator input and cursor control in Honeywell HMI, MMI, and OIT platforms, the Honeywell TP-DIKBTA-100 (51196694-300 Industrial Keyboard with Trackball) provides direct physical/electrical execution.
Suffix Breakdown & Model Matrix
- Base Model (TP-DIKBTA-100): Designates the complete industrial keypad hardware assembly with integrated tracking ball.
- Part Number (51196694-300): Defines the exact internal PCB logic component build, hardware revision code, and standardized Honeywell HMI interface configuration.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | TP-DIKBTA-100 |
| Part Number | 51196694-300 |
| Brand | Honeywell |
| Origin | USA / Global Manufacturing |
| Weight | 15 lbs (6.8 kg) |
| Dimensions | Standard desk-mounted or panel-integrated industrial footprint |
| Operating Temp | 0 to 60 deg C |
| Power Consumption | Standard loop/bus powered via Honeywell HMI connection |
| Type | Industrial Keyboard with Trackball |
| Category | HMI / MMI / OIT Sub-assembly |
| Mounting Format | Desk-mounted or panel-integrated |
| Environmental Protection | Sealed construction resistant to dust and mechanical wear |
DCS Interface & Channel-to-Channel Signal Isolation
In process automation and DCS environments, operator input peripherals interface directly with operator station nodes maintaining deterministic signal integrity. The unit utilizes channel-to-channel isolation and hardened signal processing across the standard Honeywell HMI connection bus to prevent ground loops and common-mode electrical noise injection into connected operator interface terminals. High-durability trackball optics and contact switches provide reliable feedback response and mechanical wear resistance across extended control room cycles.
Frequently Asked Questions
Q: What are the interface cable grounding requirements when panel-mounting the TP-DIKBTA-100?
A: The unit must be bonded to the central panel earth ground using a dedicated ground lug or braid. Shielded communication cables connected to the Honeywell HMI interface must be grounded at one end only to eliminate ground loop current injection across signal lines.
Q: Can the integrated trackball assembly be cleaned or serviced in field environments?
A: Field maintenance should be performed with power isolated from the HMI node. The mechanical housing provides dust resistance; external surfaces and trackball aperture should be cleared using dry low-pressure instrument air or isopropyl alcohol wipes without disassembling internal circuitry.
Field Installation Guidelines
- Mechanical Mounting: Ensure panel cutouts match specified dimensions for flush integration. For desk-mounted layouts, ensure the unit rests on a stable, vibration-dampened horizontal surface. Maintain at least 50 mm clearance behind rear panel connectors for cable bend radius.
- Wiring and Grounding: Connect all Honeywell interface cables securely using integrated locking screws. Verify protective earth (PE) connection continuity to the industrial enclosure ground bus prior to energizing the workstation node.
- Environmental Protections: Do not subject the keypad or trackball assembly to high-pressure washdowns or corrosive solvent exposure beyond standard industrial atmospheric ratings. Ensure operating ambient temperatures stay within designated operational limits.
al alarm monitoring and manual control functions across Experion PKS, Safety Manager, FSC, and legacy TDC 3000 platforms.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | TP-OPADP1-200 |
| Part Number | 51305776-100 |
| Brand | Honeywell |
| Origin | Standard Industrial Automation Specification |
| Weight | Nominal industrial panel weight (data not provided) |
| Dimensions | Standard panel-mount footprint |
| Operating Temp | Industrial standard baseline (0 to 60 deg C) |
| Power Consumption | Powered via standard DCS instrument bus |
| Type | Operator Advisor Panel |
| System Integration | Experion PKS, Safety Manager, FSC, TDC 3000 |
| Enclosure Format | Rugged panel-mounted interface |
DCS Connectivity & Channel-to-Channel Isolation
Within process control environments, this operator panel integrates directly with DCS controllers while maintaining strict deterministic signal parameters. The internal communication hardware employs optical channel-to-channel isolation to block common-mode voltage transients and ground loops from disrupting the main Experion PKS or TDC 3000 data highways. This galvanic separation ensures that local interface operations do not compromise the integrity of critical analog and digital signal processing executing on the master controller.
Frequently Asked Questions
Q: What are the backplane communication limits when integrating the TP-OPADP1-200 with legacy TDC 3000 networks?
A: Integration requires configuring the panel node within the standard network architecture limits, ensuring the polling cycles do not exceed the predefined bandwidth allocation of the TDC 3000 Local Control Network (LCN).
Q: Does the unit support hot-swapping during active process operations?
A: Panel components must be powered down prior to physical removal. Disconnecting the active communication bus under power without software detaching can cause transient faults on the control network.
Field Installation Guidelines
- Mechanical Integration: Ensure the panel cutout meets the required dimensional tolerances for flush mounting. Secure all perimeter mounting clips evenly to prevent ingress of dust and moisture in NEMA/IP-rated control cabinets.
- Electrical Grounding: Bond the chassis earth terminal to the main control cabinet ground bus using a low-impedance braided copper strap. Ensure that shielding for the communication cables is terminated according to Honeywell guidelines to mitigate electromagnetic interference (EMI).
- Wire Routing: Maintain strict spatial separation between low-voltage DCS communication lines connecting to the TP-OPADP1-200 and high-voltage AC power wiring within the same cabinet.
Honeywell TP-DIKBTA-100 51196694-300 Industrial Keyboard
Honeywell TP-DIKBTA-100 51196694-300 Industrial Keyboard
Configured for operator input and cursor control in Honeywell HMI, MMI, and OIT platforms, the Honeywell TP-DIKBTA-100 (51196694-300 Industrial Keyboard with Trackball) provides direct physical/electrical execution.
Suffix Breakdown & Model Matrix
- Base Model (TP-DIKBTA-100): Designates the complete industrial keypad hardware assembly with integrated tracking ball.
- Part Number (51196694-300): Defines the exact internal PCB logic component build, hardware revision code, and standardized Honeywell HMI interface configuration.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | TP-DIKBTA-100 |
| Part Number | 51196694-300 |
| Brand | Honeywell |
| Origin | USA / Global Manufacturing |
| Weight | 15 lbs (6.8 kg) |
| Dimensions | Standard desk-mounted or panel-integrated industrial footprint |
| Operating Temp | 0 to 60 deg C |
| Power Consumption | Standard loop/bus powered via Honeywell HMI connection |
| Type | Industrial Keyboard with Trackball |
| Category | HMI / MMI / OIT Sub-assembly |
| Mounting Format | Desk-mounted or panel-integrated |
| Environmental Protection | Sealed construction resistant to dust and mechanical wear |
DCS Interface & Channel-to-Channel Signal Isolation
In process automation and DCS environments, operator input peripherals interface directly with operator station nodes maintaining deterministic signal integrity. The unit utilizes channel-to-channel isolation and hardened signal processing across the standard Honeywell HMI connection bus to prevent ground loops and common-mode electrical noise injection into connected operator interface terminals. High-durability trackball optics and contact switches provide reliable feedback response and mechanical wear resistance across extended control room cycles.
Frequently Asked Questions
Q: What are the interface cable grounding requirements when panel-mounting the TP-DIKBTA-100?
A: The unit must be bonded to the central panel earth ground using a dedicated ground lug or braid. Shielded communication cables connected to the Honeywell HMI interface must be grounded at one end only to eliminate ground loop current injection across signal lines.
Q: Can the integrated trackball assembly be cleaned or serviced in field environments?
A: Field maintenance should be performed with power isolated from the HMI node. The mechanical housing provides dust resistance; external surfaces and trackball aperture should be cleared using dry low-pressure instrument air or isopropyl alcohol wipes without disassembling internal circuitry.
Field Installation Guidelines
- Mechanical Mounting: Ensure panel cutouts match specified dimensions for flush integration. For desk-mounted layouts, ensure the unit rests on a stable, vibration-dampened horizontal surface. Maintain at least 50 mm clearance behind rear panel connectors for cable bend radius.
- Wiring and Grounding: Connect all Honeywell interface cables securely using integrated locking screws. Verify protective earth (PE) connection continuity to the industrial enclosure ground bus prior to energizing the workstation node.
- Environmental Protections: Do not subject the keypad or trackball assembly to high-pressure washdowns or corrosive solvent exposure beyond standard industrial atmospheric ratings. Ensure operating ambient temperatures stay within designated operational limits.
al alarm monitoring and manual control functions across Experion PKS, Safety Manager, FSC, and legacy TDC 3000 platforms.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | TP-OPADP1-200 |
| Part Number | 51305776-100 |
| Brand | Honeywell |
| Origin | Standard Industrial Automation Specification |
| Weight | Nominal industrial panel weight (data not provided) |
| Dimensions | Standard panel-mount footprint |
| Operating Temp | Industrial standard baseline (0 to 60 deg C) |
| Power Consumption | Powered via standard DCS instrument bus |
| Type | Operator Advisor Panel |
| System Integration | Experion PKS, Safety Manager, FSC, TDC 3000 |
| Enclosure Format | Rugged panel-mounted interface |
DCS Connectivity & Channel-to-Channel Isolation
Within process control environments, this operator panel integrates directly with DCS controllers while maintaining strict deterministic signal parameters. The internal communication hardware employs optical channel-to-channel isolation to block common-mode voltage transients and ground loops from disrupting the main Experion PKS or TDC 3000 data highways. This galvanic separation ensures that local interface operations do not compromise the integrity of critical analog and digital signal processing executing on the master controller.
Frequently Asked Questions
Q: What are the backplane communication limits when integrating the TP-OPADP1-200 with legacy TDC 3000 networks?
A: Integration requires configuring the panel node within the standard network architecture limits, ensuring the polling cycles do not exceed the predefined bandwidth allocation of the TDC 3000 Local Control Network (LCN).
Q: Does the unit support hot-swapping during active process operations?
A: Panel components must be powered down prior to physical removal. Disconnecting the active communication bus under power without software detaching can cause transient faults on the control network.
Field Installation Guidelines
- Mechanical Integration: Ensure the panel cutout meets the required dimensional tolerances for flush mounting. Secure all perimeter mounting clips evenly to prevent ingress of dust and moisture in NEMA/IP-rated control cabinets.
- Electrical Grounding: Bond the chassis earth terminal to the main control cabinet ground bus using a low-impedance braided copper strap. Ensure that shielding for the communication cables is terminated according to Honeywell guidelines to mitigate electromagnetic interference (EMI).
- Wire Routing: Maintain strict spatial separation between low-voltage DCS communication lines connecting to the TP-OPADP1-200 and high-voltage AC power wiring within the same cabinet.
