Honeywell SDW-550 EC High-Speed Industrial Ethernet Switch
The Honeywell SDW-550 EC serves as the primary SDW-550 EC High-Speed Industrial Ethernet Switch utilized to execute secure and interference-free communication across Honeywell automation platforms.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | SDW-550 EC |
| Brand | Honeywell |
| Origin | Standard Industrial Automation Specification |
| Weight | 0.2 kg |
| Dimensions | Compact cabinet footprint |
| Operating Temp | -25 to +70 deg C |
| Power Consumption | Powered via 10–57 VDC dual redundant inputs |
| Product Type | High-Speed Industrial Ethernet Switch |
| Ports | 5 x 10/100 Mbit/s TX copper ports |
| Protection Rating | IP21 |
| MTBF | 500,000 hours |
DCS Interface & Channel-to-Channel Signal Isolation
In DCS process control networks, unmanaged switches link control nodes, field IO, and operator terminals. The module features enhanced electrical isolation and shielded isolation architectures to eliminate ground loop currents and common-mode electrical noise across network channels. Operating across 10–57 VDC dual redundant power feeds, the unit guarantees continuous port traffic execution, preventing signal loss during primary power bus transients.
Frequently Asked Questions
Q: Can the 10/100 Mbit/s port speeds be manually configured without software access? A: Yes, port speed and duplex modes support manual setup via hardware DIP switches on the unit, alongside automatic line speed auto-negotiation.
Q: What power redundancy features are supported by the switch? A: The switch accepts 10–57 VDC dual redundant power inputs, allowing two independent DC power supplies to be connected simultaneously to prevent downtime if one power feed fails.
Field Installation Guidelines
- Mounting and Layout: Install the switch inside a DIN-rail or rack enclosure suitable for its IP21 protection rating. Ensure sufficient clearance around the ventilation slots to maintain ambient operating temperatures between -25 deg C and +70 deg C.
- Power & Isolation Wiring: Connect primary and secondary DC power sources to the 10–57 VDC dual redundant input terminals. Ensure proper grounding of the shielded Ethernet cables and panel chassis to utilize the switch's built-in ground loop isolation features.
- Network Cabling: Use standard industrial-grade shielded twisted-pair Cat5e/Cat6 copper cabling for all 5 x 10/100 Mbit/s TX ports. Avoid routing Ethernet cabling alongside high-voltage AC power lines to minimize electromagnetic interference.
• Supports redundant configuration for critical control applications
• Compatible with Honeywell DCS platforms (TDC 3000, TPS, Experion)
• Control room installation design
• Model: FC-QPP-0002
• Module Type: Quad Processor Module (QPP)
• Origin: USA
• Operating Voltage: 220V
• Output Frequency: 50 kHz
• Structure: Modular
• Installation Method: Control room rack-mounted
• Enclosure Material: Aluminum alloy
• Processor Configuration: 4 processors (quad-processor group)
• System Compatibility: Honeywell TDC 3000 / TPS / Experion DCS
Honeywell SDW-550 EC High-Speed Industrial Ethernet Switch
Honeywell SDW-550 EC High-Speed Industrial Ethernet Switch
The Honeywell SDW-550 EC serves as the primary SDW-550 EC High-Speed Industrial Ethernet Switch utilized to execute secure and interference-free communication across Honeywell automation platforms.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | SDW-550 EC |
| Brand | Honeywell |
| Origin | Standard Industrial Automation Specification |
| Weight | 0.2 kg |
| Dimensions | Compact cabinet footprint |
| Operating Temp | -25 to +70 deg C |
| Power Consumption | Powered via 10–57 VDC dual redundant inputs |
| Product Type | High-Speed Industrial Ethernet Switch |
| Ports | 5 x 10/100 Mbit/s TX copper ports |
| Protection Rating | IP21 |
| MTBF | 500,000 hours |
DCS Interface & Channel-to-Channel Signal Isolation
In DCS process control networks, unmanaged switches link control nodes, field IO, and operator terminals. The module features enhanced electrical isolation and shielded isolation architectures to eliminate ground loop currents and common-mode electrical noise across network channels. Operating across 10–57 VDC dual redundant power feeds, the unit guarantees continuous port traffic execution, preventing signal loss during primary power bus transients.
Frequently Asked Questions
Q: Can the 10/100 Mbit/s port speeds be manually configured without software access? A: Yes, port speed and duplex modes support manual setup via hardware DIP switches on the unit, alongside automatic line speed auto-negotiation.
Q: What power redundancy features are supported by the switch? A: The switch accepts 10–57 VDC dual redundant power inputs, allowing two independent DC power supplies to be connected simultaneously to prevent downtime if one power feed fails.
Field Installation Guidelines
- Mounting and Layout: Install the switch inside a DIN-rail or rack enclosure suitable for its IP21 protection rating. Ensure sufficient clearance around the ventilation slots to maintain ambient operating temperatures between -25 deg C and +70 deg C.
- Power & Isolation Wiring: Connect primary and secondary DC power sources to the 10–57 VDC dual redundant input terminals. Ensure proper grounding of the shielded Ethernet cables and panel chassis to utilize the switch's built-in ground loop isolation features.
- Network Cabling: Use standard industrial-grade shielded twisted-pair Cat5e/Cat6 copper cabling for all 5 x 10/100 Mbit/s TX ports. Avoid routing Ethernet cabling alongside high-voltage AC power lines to minimize electromagnetic interference.
• Supports redundant configuration for critical control applications
• Compatible with Honeywell DCS platforms (TDC 3000, TPS, Experion)
• Control room installation design
• Model: FC-QPP-0002
• Module Type: Quad Processor Module (QPP)
• Origin: USA
• Operating Voltage: 220V
• Output Frequency: 50 kHz
• Structure: Modular
• Installation Method: Control room rack-mounted
• Enclosure Material: Aluminum alloy
• Processor Configuration: 4 processors (quad-processor group)
• System Compatibility: Honeywell TDC 3000 / TPS / Experion DCS
