Honeywell MU-TAIH02 51304453-100 Analog Input Terminal Assembly
The Honeywell MU-TAIH02 51304453-100, also cataloged as the MU-TAIH02 High-Level Analog Input Terminal Assembly (FTA), operates as a dedicated hardware component for high-level analog signal conditioning and field transmitter termination within Honeywell DCS platforms. It provides direct physical wiring interface points between field instrumentation and central processing controllers.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | MU-TAIH02 |
| Part Number | 51304453-100 |
| Brand | Honeywell |
| Origin | USA |
| Type | High-Level Analog Input Terminal Assembly (FTA) |
| Supported Signal Types | High-level analog signals |
| System Compatibility | Honeywell DCS platforms |
| Mounting Type | Panel / DIN rail installation |
| Terminal Options | Screw and compression terminals |
| HS Code | 8537101190 |
| Dimensions | 36.5 cm x 36.5 cm x 2 cm |
| Weight | ~0.53 kg |
| Operating Temp | -40 deg C to 70 deg C |
| Power Consumption | Passive field termination assembly |
4-20 mA HART Loop Protocol & Channel-to-Channel Isolation
Designed to route field signals into high-level analog input cards, the MU-TAIH02 FTA interface integrates passive signal conditioning pathways compatible with standard 4-20 mA HART loop protocol instruments. The physical trace routing on the board provides channel-to-channel isolation, preventing common-mode noise propagation and ground potential shifts from affecting controller input conversion circuitry. This layout ensures high-precision analog signal fidelity between transmitter wiring terminals and control system I/O buses.
Frequently Asked Questions
Q: What termination wire connection choices are supported on the MU-TAIH02 terminal assembly?
A: The unit features field-configurable terminal blocks supporting both screw and compression wire termination methods.
Q: How is the MU-TAIH02 physically mounted inside a control cabinet?
A: The board supports standard panel mounting or DIN rail installation configurations.
Field Installation Guidelines
- Mounting Procedure: Fasten the 36.5 cm x 36.5 cm frame securely to the cabinet backplane or DIN rail system. Verify structural stability before landing field wiring.
- Shield Grounding: Connect field instrument cable shields directly to the designated cabinet grounding busbar to prevent noise coupling across the high-level input channels.
- Wiring Practice: Strip field wiring insulation to 7 mm prior to landing conductors into screw or compression terminals. Maintain physical separation between high-level analog signal lines and AC power cables within cabinet wire trunks.
- Environmental Considerations: Ensure ambient enclosure temperatures remain within target control room specifications to prevent thermal stress on conformal coatings.
Honeywell MU-TAIH02 51304453-100 Analog Input Terminal Assembly
Honeywell MU-TAIH02 51304453-100 Analog Input Terminal Assembly
The Honeywell MU-TAIH02 51304453-100, also cataloged as the MU-TAIH02 High-Level Analog Input Terminal Assembly (FTA), operates as a dedicated hardware component for high-level analog signal conditioning and field transmitter termination within Honeywell DCS platforms. It provides direct physical wiring interface points between field instrumentation and central processing controllers.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | MU-TAIH02 |
| Part Number | 51304453-100 |
| Brand | Honeywell |
| Origin | USA |
| Type | High-Level Analog Input Terminal Assembly (FTA) |
| Supported Signal Types | High-level analog signals |
| System Compatibility | Honeywell DCS platforms |
| Mounting Type | Panel / DIN rail installation |
| Terminal Options | Screw and compression terminals |
| HS Code | 8537101190 |
| Dimensions | 36.5 cm x 36.5 cm x 2 cm |
| Weight | ~0.53 kg |
| Operating Temp | -40 deg C to 70 deg C |
| Power Consumption | Passive field termination assembly |
4-20 mA HART Loop Protocol & Channel-to-Channel Isolation
Designed to route field signals into high-level analog input cards, the MU-TAIH02 FTA interface integrates passive signal conditioning pathways compatible with standard 4-20 mA HART loop protocol instruments. The physical trace routing on the board provides channel-to-channel isolation, preventing common-mode noise propagation and ground potential shifts from affecting controller input conversion circuitry. This layout ensures high-precision analog signal fidelity between transmitter wiring terminals and control system I/O buses.
Frequently Asked Questions
Q: What termination wire connection choices are supported on the MU-TAIH02 terminal assembly?
A: The unit features field-configurable terminal blocks supporting both screw and compression wire termination methods.
Q: How is the MU-TAIH02 physically mounted inside a control cabinet?
A: The board supports standard panel mounting or DIN rail installation configurations.
Field Installation Guidelines
- Mounting Procedure: Fasten the 36.5 cm x 36.5 cm frame securely to the cabinet backplane or DIN rail system. Verify structural stability before landing field wiring.
- Shield Grounding: Connect field instrument cable shields directly to the designated cabinet grounding busbar to prevent noise coupling across the high-level input channels.
- Wiring Practice: Strip field wiring insulation to 7 mm prior to landing conductors into screw or compression terminals. Maintain physical separation between high-level analog signal lines and AC power cables within cabinet wire trunks.
- Environmental Considerations: Ensure ambient enclosure temperatures remain within target control room specifications to prevent thermal stress on conformal coatings.
,...){kind=link}