Honeywell MC-TAIH13 Input Module
Configured for high-density field variable acquisition in TotalPlant Solution (TPS) DCS platforms, the Honeywell MC-TAIH13 (MC-TAIH13 High-Level Analog Input Module) provides direct physical/electrical execution.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | MC-TAIH13 |
| Brand | Honeywell |
| Origin | USA |
| Weight | 0.56 kg |
| Dimensions | 31.3 cm x 27.8 cm x 3 cm |
| Operating Temp | -20 deg C to 60 deg C |
| Power Consumption | Standard I/O backplane draw |
| Input Density | 32 differential analog channels |
| Signal Input Range | -10 V to +30 V DC |
| System Interface | Honeywell TPS / TDC 3000 bus |
| Signal Processing | High-resolution A/D conversion |
Cold Junction Compensation and Loop Protocol Performance
Integrated directly into the Honeywell TPS I/O rack structure, the module processes up to 32 high-level voltage signals from pressure transmitters, electromagnetic flowmeters, and process temperature loops. Galvanic channel-to-channel isolation prevents common-mode noise and ground loops from compromising backplane bus communication stability. Precise internal cold junction compensation (CJC) circuits maintain analog accuracy across broad operating temperature sweeps, stabilizing 4-20 mA HART and millivolt converter conversions before data packets hit the high-speed Process Manager node.
Frequently Asked Questions
Q: Does the MC-TAIH13 module support live insertion and removal during DCS execution?
A: Yes, the card design allows hot-swapping into active TPS I/O slots provided standard electrostatic discharge (ESD) handling procedures and field power isolation rules are followed.
Q: How does the module handle voltage spikes exceeding the standard input range?
A: Internal transient voltage suppression diodes clip overvoltage conditions above +30 V DC or below -10 V DC to protect the analog-to-digital converter circuitry from permanent physical damage.
Field Installation Guidelines
Insert the module card vertically into the assigned TPS cabinet I/O slot, ensuring full engagement of the backplane edge connector before tightening the card retention screws. Ground all incoming shielded field wiring cables at the panel single-point earth bar to prevent high-frequency noise injection into the high-resolution analog input channels. Route low-voltage signal lines through dedicated wireways separated by at least 300 mm from high-voltage AC distribution power cables.
Honeywell MC-TAIH13 Input Module
Honeywell MC-TAIH13 Input Module
Configured for high-density field variable acquisition in TotalPlant Solution (TPS) DCS platforms, the Honeywell MC-TAIH13 (MC-TAIH13 High-Level Analog Input Module) provides direct physical/electrical execution.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | MC-TAIH13 |
| Brand | Honeywell |
| Origin | USA |
| Weight | 0.56 kg |
| Dimensions | 31.3 cm x 27.8 cm x 3 cm |
| Operating Temp | -20 deg C to 60 deg C |
| Power Consumption | Standard I/O backplane draw |
| Input Density | 32 differential analog channels |
| Signal Input Range | -10 V to +30 V DC |
| System Interface | Honeywell TPS / TDC 3000 bus |
| Signal Processing | High-resolution A/D conversion |
Cold Junction Compensation and Loop Protocol Performance
Integrated directly into the Honeywell TPS I/O rack structure, the module processes up to 32 high-level voltage signals from pressure transmitters, electromagnetic flowmeters, and process temperature loops. Galvanic channel-to-channel isolation prevents common-mode noise and ground loops from compromising backplane bus communication stability. Precise internal cold junction compensation (CJC) circuits maintain analog accuracy across broad operating temperature sweeps, stabilizing 4-20 mA HART and millivolt converter conversions before data packets hit the high-speed Process Manager node.
Frequently Asked Questions
Q: Does the MC-TAIH13 module support live insertion and removal during DCS execution?
A: Yes, the card design allows hot-swapping into active TPS I/O slots provided standard electrostatic discharge (ESD) handling procedures and field power isolation rules are followed.
Q: How does the module handle voltage spikes exceeding the standard input range?
A: Internal transient voltage suppression diodes clip overvoltage conditions above +30 V DC or below -10 V DC to protect the analog-to-digital converter circuitry from permanent physical damage.
Field Installation Guidelines
Insert the module card vertically into the assigned TPS cabinet I/O slot, ensuring full engagement of the backplane edge connector before tightening the card retention screws. Ground all incoming shielded field wiring cables at the panel single-point earth bar to prevent high-frequency noise injection into the high-resolution analog input channels. Route low-voltage signal lines through dedicated wireways separated by at least 300 mm from high-voltage AC distribution power cables.
%20DCS%20platforms,%20the%20Honeywell%20MC-TAIH13...){kind=link}