Honeywell DC-TAOX61 Analog Output IOTA Module
Configured for high-density analog output signal distribution in Experion Series C control platforms, the Honeywell DC-TAOX61 ( DC-TAOX61 Analog Output IOTA Module) provides direct physical/electrical execution. It serves as the physical Input Output Termination Assembly (IOTA) carrying 16-channel redundant or non-redundant analog current loop outputs from C300 controllers to field control elements.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | DC-TAOX61 |
| Brand | Honeywell |
| Origin | USA |
| Weight | 0.85 kg |
| Dimensions | Standard Series C IOTA Footprint |
| Operating Temp | 0 to 60 deg C |
| Power Consumption | 24 VDC external / Backplane loop powered |
| Channel Capacity | 16 Channels |
| Signal Output | 4-20 mA Analog Output |
| System Integration | Experion Series CI/O Assembly |
Field Loop Communications and Channel-to-Channel Isolation
The Honeywell DC-TAOX61 assembly incorporates channel-to-channel isolation parameters designed to protect control system electronics from field earth faults and voltage transients. Built to handle bi-directional 4-20 mA HART loop protocol signaling, the terminal assembly passes high-frequency digital communication signals transparently to field actuators and control valves without introducing attenuation or phase distortion into the primary analog control loops.
Frequently Asked Questions
Q: Does the DC-TAOX61 IOTA support redundant Analog Output module configurations?
A: Yes, the DC-TAOX61 terminal assembly is designed to accept dual Series C Analog Output modules to provide redundant field loop execution without signal interruption.
Q: What protection mechanisms are integrated on individual output channels of the DC-TAOX61?
A: Each terminal pathway includes current-limiting circuitry and transient surge suppression to protect the base assembly against accidental field short circuits or high-voltage spikes.
Field Installation Guidelines
- Ensure all 24 VDC external loop supply sources are de-energized prior to seating or unseating the assembly onto the mounting channel.
- Fasten the base board securely to the cabinet carrier rail, ensuring solid grounding contact between the board grounding clip and the panel chassis earth line.
- Wire field output loops to designated screw terminals using shielded twisted pair cables, bonding cable drain wires to the main cabinet ground bar.
- Verify proper alignment of card-edge connectors before inserting C300 analog output modules onto the dual IOTA slots to prevent pin bending.
Honeywell DC-TAOX61 Analog Output IOTA Module
Honeywell DC-TAOX61 Analog Output IOTA Module
Configured for high-density analog output signal distribution in Experion Series C control platforms, the Honeywell DC-TAOX61 ( DC-TAOX61 Analog Output IOTA Module) provides direct physical/electrical execution. It serves as the physical Input Output Termination Assembly (IOTA) carrying 16-channel redundant or non-redundant analog current loop outputs from C300 controllers to field control elements.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | DC-TAOX61 |
| Brand | Honeywell |
| Origin | USA |
| Weight | 0.85 kg |
| Dimensions | Standard Series C IOTA Footprint |
| Operating Temp | 0 to 60 deg C |
| Power Consumption | 24 VDC external / Backplane loop powered |
| Channel Capacity | 16 Channels |
| Signal Output | 4-20 mA Analog Output |
| System Integration | Experion Series CI/O Assembly |
Field Loop Communications and Channel-to-Channel Isolation
The Honeywell DC-TAOX61 assembly incorporates channel-to-channel isolation parameters designed to protect control system electronics from field earth faults and voltage transients. Built to handle bi-directional 4-20 mA HART loop protocol signaling, the terminal assembly passes high-frequency digital communication signals transparently to field actuators and control valves without introducing attenuation or phase distortion into the primary analog control loops.
Frequently Asked Questions
Q: Does the DC-TAOX61 IOTA support redundant Analog Output module configurations?
A: Yes, the DC-TAOX61 terminal assembly is designed to accept dual Series C Analog Output modules to provide redundant field loop execution without signal interruption.
Q: What protection mechanisms are integrated on individual output channels of the DC-TAOX61?
A: Each terminal pathway includes current-limiting circuitry and transient surge suppression to protect the base assembly against accidental field short circuits or high-voltage spikes.
Field Installation Guidelines
- Ensure all 24 VDC external loop supply sources are de-energized prior to seating or unseating the assembly onto the mounting channel.
- Fasten the base board securely to the cabinet carrier rail, ensuring solid grounding contact between the board grounding clip and the panel chassis earth line.
- Wire field output loops to designated screw terminals using shielded twisted pair cables, bonding cable drain wires to the main cabinet ground bar.
- Verify proper alignment of card-edge connectors before inserting C300 analog output modules onto the dual IOTA slots to prevent pin bending.
