Honeywell CC-TAON11 51306521-175 Analog Output Module
The Honeywell CC-TAON11 51306521-175, also cataloged as the CC-TAON11 Analog Output Module, operates as a dedicated hardware component for direct digital-to-analog signal conversion and final control element positioning within Honeywell Series C controllers.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | CC-TAON11 51306521-175 |
| Brand | Honeywell |
| Origin | USA |
| Weight | 0.2 kg |
| Dimensions | 11.8 cm x 12.7 cm x 2.5 cm |
| Operating Temp | -40 deg C to 70 deg C |
| Power Consumption | 1.5 W per channel |
| Signal Output Ranges | 4-20 mA or 0-10 V |
| Resolution | 16 bits |
| Output Accuracy | +/-0.1% of span |
| Channel Update Rate | 10 ms per channel |
| Storage Temp | -40 deg C to 85 deg C |
Cold Junction Compensation and Loop Protocol Performance
Designed for high-precision loop execution, the module integrates internal channel-to-channel isolation barriers to block common-mode interference and cross-talk across control outputs. Real-time signal conditioning maintains +/-0.1% accuracy over temperature drifts, supporting reliable 4-20 mA HART feedback loops for control valves, variable frequency drives, and positioners. Thermal dissipation design allows continuous 1.5 W per channel loading across full extended operating profiles without degradation of digital-to-analog converter resolution.
Frequently Asked Questions
Q: How is field cabling terminated to the CC-TAON11 module?
A: Field cables connect directly to the underlying Input Output Termination Assembly (IOTA) screw terminals, isolating physical field wiring from the active electronic processing module.
Q: What output modes can be configured on the channel interfaces?
A: Channels are software-configurable within the Experion PKS environment to supply either a 4-20 mA current loop or a 0-10 V DC control signal.
Q: Does module removal disrupt the continuity of field termination circuits?
A: No, removing the active electronic card from the IOTA carrier preserves field wiring connections and ground shield integrity across adjacent channels.
Field Installation Guidelines
Mount the IOTA assembly onto the cabinet carrier rack using standard hardware. Maintain a minimum separation distance of 100 mm between low-voltage signal cabling and high-voltage AC power lines to minimize induced noise. Connect all field cable shield wires directly to the panel single-point earth busbar. Torque terminal connector screws to standard specifications to prevent high-resistance electrical connections.
Honeywell CC-TAON11 51306521-175 Analog Output Module
Honeywell CC-TAON11 51306521-175 Analog Output Module
The Honeywell CC-TAON11 51306521-175, also cataloged as the CC-TAON11 Analog Output Module, operates as a dedicated hardware component for direct digital-to-analog signal conversion and final control element positioning within Honeywell Series C controllers.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | CC-TAON11 51306521-175 |
| Brand | Honeywell |
| Origin | USA |
| Weight | 0.2 kg |
| Dimensions | 11.8 cm x 12.7 cm x 2.5 cm |
| Operating Temp | -40 deg C to 70 deg C |
| Power Consumption | 1.5 W per channel |
| Signal Output Ranges | 4-20 mA or 0-10 V |
| Resolution | 16 bits |
| Output Accuracy | +/-0.1% of span |
| Channel Update Rate | 10 ms per channel |
| Storage Temp | -40 deg C to 85 deg C |
Cold Junction Compensation and Loop Protocol Performance
Designed for high-precision loop execution, the module integrates internal channel-to-channel isolation barriers to block common-mode interference and cross-talk across control outputs. Real-time signal conditioning maintains +/-0.1% accuracy over temperature drifts, supporting reliable 4-20 mA HART feedback loops for control valves, variable frequency drives, and positioners. Thermal dissipation design allows continuous 1.5 W per channel loading across full extended operating profiles without degradation of digital-to-analog converter resolution.
Frequently Asked Questions
Q: How is field cabling terminated to the CC-TAON11 module?
A: Field cables connect directly to the underlying Input Output Termination Assembly (IOTA) screw terminals, isolating physical field wiring from the active electronic processing module.
Q: What output modes can be configured on the channel interfaces?
A: Channels are software-configurable within the Experion PKS environment to supply either a 4-20 mA current loop or a 0-10 V DC control signal.
Q: Does module removal disrupt the continuity of field termination circuits?
A: No, removing the active electronic card from the IOTA carrier preserves field wiring connections and ground shield integrity across adjacent channels.
Field Installation Guidelines
Mount the IOTA assembly onto the cabinet carrier rack using standard hardware. Maintain a minimum separation distance of 100 mm between low-voltage signal cabling and high-voltage AC power lines to minimize induced noise. Connect all field cable shield wires directly to the panel single-point earth busbar. Torque terminal connector screws to standard specifications to prevent high-resistance electrical connections.
