Honeywell 80363969-150 Output Module
The Honeywell 80363969-150, also cataloged as the 80363969 Analog Output Module, operates as a dedicated hardware component for converting digital control signals into multi-channel current loops within Honeywell DCS platforms.
Suffix Breakdown & Model Matrix
| Part Number | Option Suffix | Module Configuration | Outputs | Signal Format |
|---|---|---|---|---|
| 80363969 | Base | Standard 16-Channel Analog Output Circuit Board | 16 Channels | 4-20 mA |
| 80363969-150 | -150 | Conformal Coated 16-Channel High-Density Output Module | 16 Channels | 4-20 mA |
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 80363969-150 |
| Brand | Honeywell |
| Origin | USA |
| Weight | 0.99 lbs |
| Dimensions | Standard DCS I/O Rack Slot |
| Operating Temp | 0 to 60 deg C |
| Power Consumption | 24 VDC Nominal |
| Output Channels | 16 |
| Output Signal Type | 4-20 mA Current Loop |
| Category | VDC Logic I/O Module / Analog Output Module |
Channel-to-Channel Isolation & Loop Stability
The module incorporates channel-to-channel isolation parameters engineered to eliminate signal cross-talk and prevent ground loop interference across all 16 independent 4-20 mA loops. By decoupling field side electrical transients from the backplane bus, the module preserves signal fidelity for final control elements such as control valve positioners and variable frequency drives. Internal current regulation circuits maintain stable signal drive capabilities across varying field loop load impedances under full operational load.
Frequently Asked Questions
Q: Can the Honeywell 80363969-150 module be inserted or removed under live backplane power?
A: Hot-swapping is permissible provided the field termination assembly is disconnected or isolated first to prevent transient electrical spikes across the backplane edge connector pins during insertion.
Q: What power source drives the 4-20 mA field loops on this module?
A: The module operates from an internal 24 VDC backplane supply bus or system I/O power rail to source current for all 16 analog output loops.
Field Installation Guidelines
- Confirm system ground bonding meets factory specifications with low impedance connection to earth prior to card insertion.
- Align module board edges with backplane guide rails and slide card horizontally until edge connectors seat completely into the backplane.
- Ensure all 4-20 mA output signal cables use twisted shielded pair construction with single-point shielding connected at the cabinet ground bar.
- Verify field wiring termination block screws are torqued to manufacturer terminal specifications to maintain reliable connection integrity.
Honeywell 80363969-150 Output Module
Honeywell 80363969-150 Output Module
The Honeywell 80363969-150, also cataloged as the 80363969 Analog Output Module, operates as a dedicated hardware component for converting digital control signals into multi-channel current loops within Honeywell DCS platforms.
Suffix Breakdown & Model Matrix
| Part Number | Option Suffix | Module Configuration | Outputs | Signal Format |
|---|---|---|---|---|
| 80363969 | Base | Standard 16-Channel Analog Output Circuit Board | 16 Channels | 4-20 mA |
| 80363969-150 | -150 | Conformal Coated 16-Channel High-Density Output Module | 16 Channels | 4-20 mA |
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 80363969-150 |
| Brand | Honeywell |
| Origin | USA |
| Weight | 0.99 lbs |
| Dimensions | Standard DCS I/O Rack Slot |
| Operating Temp | 0 to 60 deg C |
| Power Consumption | 24 VDC Nominal |
| Output Channels | 16 |
| Output Signal Type | 4-20 mA Current Loop |
| Category | VDC Logic I/O Module / Analog Output Module |
Channel-to-Channel Isolation & Loop Stability
The module incorporates channel-to-channel isolation parameters engineered to eliminate signal cross-talk and prevent ground loop interference across all 16 independent 4-20 mA loops. By decoupling field side electrical transients from the backplane bus, the module preserves signal fidelity for final control elements such as control valve positioners and variable frequency drives. Internal current regulation circuits maintain stable signal drive capabilities across varying field loop load impedances under full operational load.
Frequently Asked Questions
Q: Can the Honeywell 80363969-150 module be inserted or removed under live backplane power?
A: Hot-swapping is permissible provided the field termination assembly is disconnected or isolated first to prevent transient electrical spikes across the backplane edge connector pins during insertion.
Q: What power source drives the 4-20 mA field loops on this module?
A: The module operates from an internal 24 VDC backplane supply bus or system I/O power rail to source current for all 16 analog output loops.
Field Installation Guidelines
- Confirm system ground bonding meets factory specifications with low impedance connection to earth prior to card insertion.
- Align module board edges with backplane guide rails and slide card horizontally until edge connectors seat completely into the backplane.
- Ensure all 4-20 mA output signal cables use twisted shielded pair construction with single-point shielding connected at the cabinet ground bar.
- Verify field wiring termination block screws are torqued to manufacturer terminal specifications to maintain reliable connection integrity.
