Honeywell 80363969-100 Analog Output Board
The Honeywell 80363969-100, also cataloged as the 80363969 Analog Output Board, operates as a dedicated hardware component for converting digital control commands into analog field current signals within Honeywell DCS process control architectures.
Suffix Breakdown & Model Matrix
| Part Number | Option Suffix | Description | Signal Channels | Configuration |
|---|---|---|---|---|
| 80363969 | Base Assembly | Standard Analog Output Circuit Board | 16 | Uncoated / Base |
| 80363969-100 | -100 | Non-Conformal Coated Analog Output Board Assembly | 16 | Standard Revision |
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 80363969-100 |
| Brand | Honeywell |
| Origin | USA |
| Weight | 1.21 lbs (0.55 kg) |
| Dimensions | Standard DCS Card Cage Module |
| Operating Temp | 0 to 60 deg C |
| Power Consumption | 24 VDC Nominal |
| Form Factor | PC Board PLC / Add-On Board |
| Signal Output Type | 4-20 mA Analog Current Loop |
| Alternate Part Number | 80363970-100 |
Channel-to-Channel Isolation & Signal Accuracy
The module provides high-density 16-channel current generation using galvanically isolated output paths to mitigate ground loops across multi-loop field deployments. Each output channel dynamically scales control loop values to 4-20 mA current loops, ensuring noise rejection and transient protection across backplane bus lines. Channel-to-channel isolation prevents field wiring fault propagation to adjacent channels or backplane logic.
Frequently Asked Questions
Q: Does the 80363969-100 assembly support hot-swapping during system operation?
A: Module insertion or removal must follow cabinet shutdown procedures or field-terminal decoupling to prevent backplane pin electrical transients during live bus engagement.
Q: What is the primary difference between the -100 and -150 suffix designations?
A: The -100 revision represents the standard uncoated circuit board assembly, whereas -150 designates conformal coating for harsh environmental exposure.
Field Installation Guidelines
- Ground all cabinet backplane chassis frames to a single-point earth ground bus bar before card seating.
- Align board guides along upper and lower rack channels and slide card inward until backplane connectors seat completely.
- Route 4-20 mA field signal cables through dedicated low-voltage wiring troughs away from high-voltage AC conductors.
- Verify cable shields are terminated at a single ground reference point to prevent ground loop noise on output channels.
Honeywell 80363969-100 Analog Output Board
Honeywell 80363969-100 Analog Output Board
The Honeywell 80363969-100, also cataloged as the 80363969 Analog Output Board, operates as a dedicated hardware component for converting digital control commands into analog field current signals within Honeywell DCS process control architectures.
Suffix Breakdown & Model Matrix
| Part Number | Option Suffix | Description | Signal Channels | Configuration |
|---|---|---|---|---|
| 80363969 | Base Assembly | Standard Analog Output Circuit Board | 16 | Uncoated / Base |
| 80363969-100 | -100 | Non-Conformal Coated Analog Output Board Assembly | 16 | Standard Revision |
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 80363969-100 |
| Brand | Honeywell |
| Origin | USA |
| Weight | 1.21 lbs (0.55 kg) |
| Dimensions | Standard DCS Card Cage Module |
| Operating Temp | 0 to 60 deg C |
| Power Consumption | 24 VDC Nominal |
| Form Factor | PC Board PLC / Add-On Board |
| Signal Output Type | 4-20 mA Analog Current Loop |
| Alternate Part Number | 80363970-100 |
Channel-to-Channel Isolation & Signal Accuracy
The module provides high-density 16-channel current generation using galvanically isolated output paths to mitigate ground loops across multi-loop field deployments. Each output channel dynamically scales control loop values to 4-20 mA current loops, ensuring noise rejection and transient protection across backplane bus lines. Channel-to-channel isolation prevents field wiring fault propagation to adjacent channels or backplane logic.
Frequently Asked Questions
Q: Does the 80363969-100 assembly support hot-swapping during system operation?
A: Module insertion or removal must follow cabinet shutdown procedures or field-terminal decoupling to prevent backplane pin electrical transients during live bus engagement.
Q: What is the primary difference between the -100 and -150 suffix designations?
A: The -100 revision represents the standard uncoated circuit board assembly, whereas -150 designates conformal coating for harsh environmental exposure.
Field Installation Guidelines
- Ground all cabinet backplane chassis frames to a single-point earth ground bus bar before card seating.
- Align board guides along upper and lower rack channels and slide card inward until backplane connectors seat completely.
- Route 4-20 mA field signal cables through dedicated low-voltage wiring troughs away from high-voltage AC conductors.
- Verify cable shields are terminated at a single ground reference point to prevent ground loop noise on output channels.
