GE Fanuc IC693PBM200-FE PROFIBUS-DP Master Module
The IC693PBM200-FE is a PROFIBUS-DP Master communication module designed for the GE Fanuc (Emerson) Series 90-30 PLC system. It enables the host Series 90-30 CPU to exchange cyclic I/O data across high-speed PROFIBUS-DP fieldbus networks, integrating up to 125 field slave devices into a centralized remote I/O control architecture.
Network Capacity and Communication Performance
The module supports all standard PROFIBUS-DP baud rates ranging from 9.6 kbps up to 12 Mbps. It accommodates up to 244 bytes of input data and 244 bytes of output data per slave device, subject to maximum backplane transfer limits of 3,972 bytes of total input and 3,972 bytes of total output data between the module and the host CPU.
Front-panel diagnostic LEDs provide real-time network and system status. Additionally, an RS-232 serial service port is included specifically for local firmware upgrades and diagnostic maintenance.
Baseplate Compatibility and Operating Modes
The module can be installed in any available slot of a Series 90-30 CPU baseplate, expansion baseplate, or remote baseplate, except for slot 1 of a modular CPU baseplate which is reserved for the CPU.
During normal host operations, the master actively scans configured slaves. If the host PLC stops scanning its I/O, the module automatically enters Clear Mode, sending zeroed data outputs to connected slave nodes until cyclic scanning resumes.
System Compatibility and Configuration Requirements
Configuring the IC693PBM200-FE requires Proficy Machine Edition Logic Developer PLC programming software (version 3.0 or later). The host CPU requires firmware version 8.00 or higher (version 10.60 or higher is recommended for large network configurations).
| Parameter | Specification |
|---|---|
| Model | IC693PBM200-FE |
| Brand | GE Fanuc (Emerson) |
| System Compatibility | GE Series 90-30 PLC |
| Protocol | PROFIBUS-DP Master |
| Baud Rates | 9.6 kbps to 12 Mbps (standard rates) |
| Slave Capacity | Up to 125 PROFIBUS-DP slaves |
| Per-Slave Data Limit | 244 Bytes Input / 244 Bytes Output |
| CPU Data Exchange Limit | 3,972 Bytes Input / 3,972 Bytes Output |
| Ports | 1 x PROFIBUS-DP (DB9), 1 x RS-232 Service Port |
| Backplane Current Draw | 450 mA @ 5 VDC (typical) |
| Operating Temperature | 0 to 60 deg C |
| Storage Temperature | -40 to 85 deg C |
Frequently Asked Questions
Q: Where can the IC693PBM200-FE module be installed in a Series 90-30 rack?
A: It can be mounted in any slot on a CPU baseplate, expansion baseplate, or remote baseplate, with the exception of slot 1 on a modular CPU baseplate.
Q: What software and CPU firmware versions are required to configure this module?
A: Configuration requires Proficy Machine Edition Logic Developer PLC version 3.0 or later, and the host Series 90-30 CPU must run firmware version 8.00 or higher.
Q: How does the IC693PBM200-FE behave when the host PLC stops scanning I/O?
A: The module enters Clear Mode, transmitting zeroed output data to all configured slave devices until normal CPU scanning is restored.
GE Fanuc IC693PBM200-FE PROFIBUS-DP Master Module
GE Fanuc IC693PBM200-FE PROFIBUS-DP Master Module
The IC693PBM200-FE is a PROFIBUS-DP Master communication module designed for the GE Fanuc (Emerson) Series 90-30 PLC system. It enables the host Series 90-30 CPU to exchange cyclic I/O data across high-speed PROFIBUS-DP fieldbus networks, integrating up to 125 field slave devices into a centralized remote I/O control architecture.
Network Capacity and Communication Performance
The module supports all standard PROFIBUS-DP baud rates ranging from 9.6 kbps up to 12 Mbps. It accommodates up to 244 bytes of input data and 244 bytes of output data per slave device, subject to maximum backplane transfer limits of 3,972 bytes of total input and 3,972 bytes of total output data between the module and the host CPU.
Front-panel diagnostic LEDs provide real-time network and system status. Additionally, an RS-232 serial service port is included specifically for local firmware upgrades and diagnostic maintenance.
Baseplate Compatibility and Operating Modes
The module can be installed in any available slot of a Series 90-30 CPU baseplate, expansion baseplate, or remote baseplate, except for slot 1 of a modular CPU baseplate which is reserved for the CPU.
During normal host operations, the master actively scans configured slaves. If the host PLC stops scanning its I/O, the module automatically enters Clear Mode, sending zeroed data outputs to connected slave nodes until cyclic scanning resumes.
System Compatibility and Configuration Requirements
Configuring the IC693PBM200-FE requires Proficy Machine Edition Logic Developer PLC programming software (version 3.0 or later). The host CPU requires firmware version 8.00 or higher (version 10.60 or higher is recommended for large network configurations).
| Parameter | Specification |
|---|---|
| Model | IC693PBM200-FE |
| Brand | GE Fanuc (Emerson) |
| System Compatibility | GE Series 90-30 PLC |
| Protocol | PROFIBUS-DP Master |
| Baud Rates | 9.6 kbps to 12 Mbps (standard rates) |
| Slave Capacity | Up to 125 PROFIBUS-DP slaves |
| Per-Slave Data Limit | 244 Bytes Input / 244 Bytes Output |
| CPU Data Exchange Limit | 3,972 Bytes Input / 3,972 Bytes Output |
| Ports | 1 x PROFIBUS-DP (DB9), 1 x RS-232 Service Port |
| Backplane Current Draw | 450 mA @ 5 VDC (typical) |
| Operating Temperature | 0 to 60 deg C |
| Storage Temperature | -40 to 85 deg C |
Frequently Asked Questions
Q: Where can the IC693PBM200-FE module be installed in a Series 90-30 rack?
A: It can be mounted in any slot on a CPU baseplate, expansion baseplate, or remote baseplate, with the exception of slot 1 on a modular CPU baseplate.
Q: What software and CPU firmware versions are required to configure this module?
A: Configuration requires Proficy Machine Edition Logic Developer PLC version 3.0 or later, and the host Series 90-30 CPU must run firmware version 8.00 or higher.
Q: How does the IC693PBM200-FE behave when the host PLC stops scanning I/O?
A: The module enters Clear Mode, transmitting zeroed output data to all configured slave devices until normal CPU scanning is restored.
%20Series...){kind=link}