GE Fanuc|IC200PWR102|AC Power Supply Module
GE Fanuc IC200PWR102 AC Power Supply Module
Description
The GE Fanuc IC200PWR102 is a VersaMax AC input power supply module with extended functionality, providing 5 VDC and 3.3 VDC backplane power to CPUs, I/O modules, and network interface units, serving as primary or supplementary power source.
Features
- Dual AC input ranges via jumper selection
- Operates as main power or with booster carrier (IC200PWB001)
- Provides 5 VDC and 3.3 VDC regulated outputs
- Short circuit and overload protection
- Jumper determines input range:
- Jumper installed: 85–132 VAC
- No jumper: 176–264 VAC
- Warning: Never use jumper at 240 VAC input
Technical Specifications
- Input voltage:
- With jumper: 85–132 VAC (nominal 120 VAC)
- Without jumper: 176–264 VAC (nominal 240 VAC)
- Safe operation at 120 VAC with or without jumper
- Frequency range: 47–63 Hz
- Input power: 27 VA
- Holdup time: 20 ms (not accurate at 120 VAC without jumper)
- Output voltages:
- 5 VDC
- 3.3 VDC
- Output current:
- Total max: 1.5 A
- 3.3 VDC max: 0.25 A
- 5 VDC: 1.5 A minus 3.3 V current
GE Fanuc|IC200PWR102|AC Power Supply Module


GE Fanuc|IC200PWR102|AC Power Supply Module
GE Fanuc IC200PWR102 AC Power Supply Module
Description
The GE Fanuc IC200PWR102 is a VersaMax AC input power supply module with extended functionality, providing 5 VDC and 3.3 VDC backplane power to CPUs, I/O modules, and network interface units, serving as primary or supplementary power source.
Features
- Dual AC input ranges via jumper selection
- Operates as main power or with booster carrier (IC200PWB001)
- Provides 5 VDC and 3.3 VDC regulated outputs
- Short circuit and overload protection
- Jumper determines input range:
- Jumper installed: 85–132 VAC
- No jumper: 176–264 VAC
- Warning: Never use jumper at 240 VAC input
Technical Specifications
- Input voltage:
- With jumper: 85–132 VAC (nominal 120 VAC)
- Without jumper: 176–264 VAC (nominal 240 VAC)
- Safe operation at 120 VAC with or without jumper
- Frequency range: 47–63 Hz
- Input power: 27 VA
- Holdup time: 20 ms (not accurate at 120 VAC without jumper)
- Output voltages:
- 5 VDC
- 3.3 VDC
- Output current:
- Total max: 1.5 A
- 3.3 VDC max: 0.25 A
- 5 VDC: 1.5 A minus 3.3 V current