The IS200EMCSG1A is a Multibridge Connector Sensor Card manufactured by General Electric (GE) for the EX2100 Innovation Series excitation control system. Also identified as an Exciter Multibridge Conduction Sensor Control board, it contains four conduction sensors labeled E1 through E4 and two independent sensor circuits, U1 and U2. Its connector arrangement supports power supply connections within the multibridge sensing assembly.
Product Specifications
Parameter
Specification
Model
IS200EMCSG1A
Brand
General Electric (GE)
Series
EX2100 Innovation Series
Product Type
Multibridge Conduction Sensor Card
Board Description
Exciter Multibridge Conduction Sensor Control
Conduction Sensors
4
Sensor Designations
E1, E2, E3, E4
Independent Sensor Circuits
U1, U2
Power Supply Connectors
Two six-plug connectors
Length
4.35 inches
Width
2 inches
Weight
Less than 1 lb
Manufacturer Status
Discontinued
Conduction Sensor Configuration
The IS200EMCSG1A incorporates four conduction sensors positioned along the bottom edge of the circuit board. Each sensor has an individual designation, E1, E2, E3, or E4, allowing the sensing positions to be identified during inspection, troubleshooting, and replacement.
Two additional independent sensor circuits, designated U1 and U2, are located between E2 and E3. These circuits form part of the board's sensing arrangement. Their individual electrical characteristics and signal specifications are not included in the available product data.
Connectors and Board Layout
The board has two six-plug connectors located on the side opposite the conduction sensors, near the alphanumeric catalog number. These connectors provide the power supply connection points for the board assembly.
The component layout also includes four metal film resistors and one ceramic capacitor. The relatively simple component arrangement reflects the board's dedicated sensing function rather than a general-purpose processing or I/O architecture.
Replacement and Maintenance
The IS200EMCSG1A is no longer in production. The availability of replacement units may therefore depend on existing inventory and specialist industrial automation suppliers.
The original product information indicates that the sensor circuits can be replaced separately. This may be relevant when assessing repair options, although the replacement procedure, component-level compatibility, and required testing conditions should be verified before maintenance work.
Frequently Asked Questions
Q: How many conduction sensors are included on the IS200EMCSG1A?
A: The board contains four conduction sensors, designated E1, E2, E3, and E4. It also includes two independent sensor circuits labeled U1 and U2.
Q: What is the function of the two six-plug connectors?
A: They provide power supply connections for the board. Their exact pin assignments and electrical ratings are not specified in the available product information.
Q: Is the GE IS200EMCSG1A still in production?
A: No. The model is identified as discontinued. Replacement availability depends on remaining inventory and supplier stock.
Conduction Sensor Card | General Electric IS200EMCSG1A
1 / of3
Order and Warranty Information
Terms of Purchase and Returns
Detailed guidelines on minimum order quantity, delivery times, payment options, warranty, and return policies.
We gladly accept bulk orders, with a minimum order quantity of just one unit.
Upon request, we can provide all necessary documents, including Certificates of Origin/Conformance and other required export paperwork.
We accept 100% T/T (Telegraphic Transfer) payment before shipping. For items with lead times, a 30% deposit is required upfront, with the remaining 70% payable before shipment. For RMB transfers, please contact us if you have an agent in China.
All new and original items come with a standard one-year warranty. For extended warranty options, feel free to contact us for pricing details.
We prioritize your satisfaction. If you need to return an item, it must be done within 30 days of purchase. The product must be unused, unopened, and in its original packaging, including all accessories. Refunds will be processed within 5-7 business days of receiving the return. Please note, shipping and handling charges are non-refundable.
The IS200EMCSG1A is a Multibridge Connector Sensor Card manufactured by General Electric (GE) for the EX2100 Innovation Series excitation control system. Also identified as an Exciter Multibridge Conduction Sensor Control board, it contains four conduction sensors labeled E1 through E4 and two independent sensor circuits, U1 and U2. Its connector arrangement supports power supply connections within the multibridge sensing assembly.
Product Specifications
Parameter
Specification
Model
IS200EMCSG1A
Brand
General Electric (GE)
Series
EX2100 Innovation Series
Product Type
Multibridge Conduction Sensor Card
Board Description
Exciter Multibridge Conduction Sensor Control
Conduction Sensors
4
Sensor Designations
E1, E2, E3, E4
Independent Sensor Circuits
U1, U2
Power Supply Connectors
Two six-plug connectors
Length
4.35 inches
Width
2 inches
Weight
Less than 1 lb
Manufacturer Status
Discontinued
Conduction Sensor Configuration
The IS200EMCSG1A incorporates four conduction sensors positioned along the bottom edge of the circuit board. Each sensor has an individual designation, E1, E2, E3, or E4, allowing the sensing positions to be identified during inspection, troubleshooting, and replacement.
Two additional independent sensor circuits, designated U1 and U2, are located between E2 and E3. These circuits form part of the board's sensing arrangement. Their individual electrical characteristics and signal specifications are not included in the available product data.
Connectors and Board Layout
The board has two six-plug connectors located on the side opposite the conduction sensors, near the alphanumeric catalog number. These connectors provide the power supply connection points for the board assembly.
The component layout also includes four metal film resistors and one ceramic capacitor. The relatively simple component arrangement reflects the board's dedicated sensing function rather than a general-purpose processing or I/O architecture.
Replacement and Maintenance
The IS200EMCSG1A is no longer in production. The availability of replacement units may therefore depend on existing inventory and specialist industrial automation suppliers.
The original product information indicates that the sensor circuits can be replaced separately. This may be relevant when assessing repair options, although the replacement procedure, component-level compatibility, and required testing conditions should be verified before maintenance work.
Frequently Asked Questions
Q: How many conduction sensors are included on the IS200EMCSG1A?
A: The board contains four conduction sensors, designated E1, E2, E3, and E4. It also includes two independent sensor circuits labeled U1 and U2.
Q: What is the function of the two six-plug connectors?
A: They provide power supply connections for the board. Their exact pin assignments and electrical ratings are not specified in the available product information.
Q: Is the GE IS200EMCSG1A still in production?
A: No. The model is identified as discontinued. Replacement availability depends on remaining inventory and supplier stock.
Express Shipping
Fast and efficient delivery for urgent requirements.
Extensive Inventory
A large selection of stock for prompt availability.
Quality Assurance
Authentic, premium-grade PLC and DCS components.
Global Service
Serving clients globally with dependable customer support.
Variant picker
Choosing a selection results in a full page refresh.