Allen-Bradley E2108/150/00/1/1 ControlLogix PLC Module
The Allen-Bradley E2108/150/00/1/1 , also cataloged as the E2108 PLC Module, operates as a dedicated hardware component for high-density analog and digital signal processing within Allen-Bradley ControlLogix platforms.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | E2108/150/00/1/1 (1756-E2108/150/00/1/1) |
| Brand | Allen-Bradley |
| Origin | USA |
| Weight | 0.54 kg |
| Dimensions | 146 mm x 89 mm x 57 mm |
| Operating Temp | -20 to 60 deg C |
| Power Consumption | Low power consumption chassis backplane load |
| Product Type | PLC Modules |
| System Platform | ControlLogix Automation Systems |
| Conversion Resolution | 16-bit signal conversion |
| Maximum Update Rate | Up to 2.5 kHz |
| Noise Immunity | Onboard EMI/RFI shielding protection |
Backplane Bus Communication Velocity & Deterministic Networks
The E2108/150/00/1/1 module interfaces across the ControlLogix 1756 backplane bus to ensure rapid cyclic I/O data transfers and low latency execution. Operating at update rates up to 2.5 kHz with 16-bit analog conversion resolution, the hardware maintains backplane bus communication velocity and firmware flash compatibility during multi-channel data acquisition. The module design enables I/O density scaling and deterministic EtherNet/IP network synchronization while offloading signal filtering and analog-to-digital conversion processing from the primary ControlLogix CPU controller.
Frequently Asked Questions
Q: What chassis series is compatible with the E2108/150/00/1/1 module?
A: The module is designed specifically for insertion into standard Allen-Bradley ControlLogix 1756 I/O chassis slots.
Q: What is the maximum update rate supported by the onboard converter?
A: The onboard signal processing circuitry supports high-speed dynamic acquisition up to a maximum update rate of 2.5 kHz across configured channels.
Field Installation Guidelines
- Power off the target ControlLogix chassis backplane prior to inserting or removing the I/O module from the rack slot.
- Align the module circuit board with the top and bottom chassis card guides, sliding the unit inward until the locking tabs snap into place.
- Wire field signals using twisted, shielded cable pairs to preserve 16-bit signal accuracy and suppress external EMI/RFI noise.
- Ground the overall cable shield to the cabinet protective earth ground rail at one end only to prevent noise loops across signal grounds.
- Verify cabinet ambient operating temperature remains between -20 deg C and 60 deg C to ensure continuous, un-derated module operation.
Allen-Bradley E2108/150/00/1/1 ControlLogix PLC Module
Allen-Bradley E2108/150/00/1/1 ControlLogix PLC Module
The Allen-Bradley E2108/150/00/1/1 , also cataloged as the E2108 PLC Module, operates as a dedicated hardware component for high-density analog and digital signal processing within Allen-Bradley ControlLogix platforms.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | E2108/150/00/1/1 (1756-E2108/150/00/1/1) |
| Brand | Allen-Bradley |
| Origin | USA |
| Weight | 0.54 kg |
| Dimensions | 146 mm x 89 mm x 57 mm |
| Operating Temp | -20 to 60 deg C |
| Power Consumption | Low power consumption chassis backplane load |
| Product Type | PLC Modules |
| System Platform | ControlLogix Automation Systems |
| Conversion Resolution | 16-bit signal conversion |
| Maximum Update Rate | Up to 2.5 kHz |
| Noise Immunity | Onboard EMI/RFI shielding protection |
Backplane Bus Communication Velocity & Deterministic Networks
The E2108/150/00/1/1 module interfaces across the ControlLogix 1756 backplane bus to ensure rapid cyclic I/O data transfers and low latency execution. Operating at update rates up to 2.5 kHz with 16-bit analog conversion resolution, the hardware maintains backplane bus communication velocity and firmware flash compatibility during multi-channel data acquisition. The module design enables I/O density scaling and deterministic EtherNet/IP network synchronization while offloading signal filtering and analog-to-digital conversion processing from the primary ControlLogix CPU controller.
Frequently Asked Questions
Q: What chassis series is compatible with the E2108/150/00/1/1 module?
A: The module is designed specifically for insertion into standard Allen-Bradley ControlLogix 1756 I/O chassis slots.
Q: What is the maximum update rate supported by the onboard converter?
A: The onboard signal processing circuitry supports high-speed dynamic acquisition up to a maximum update rate of 2.5 kHz across configured channels.
Field Installation Guidelines
- Power off the target ControlLogix chassis backplane prior to inserting or removing the I/O module from the rack slot.
- Align the module circuit board with the top and bottom chassis card guides, sliding the unit inward until the locking tabs snap into place.
- Wire field signals using twisted, shielded cable pairs to preserve 16-bit signal accuracy and suppress external EMI/RFI noise.
- Ground the overall cable shield to the cabinet protective earth ground rail at one end only to prevent noise loops across signal grounds.
- Verify cabinet ambient operating temperature remains between -20 deg C and 60 deg C to ensure continuous, un-derated module operation.
