Allen-Bradley 6176M-17VN Industrial Display Monitor
Configured for industrial video display and operator interface visualization in Allen-Bradley automation systems, the Allen-Bradley 6176M-17VN (6176M-17VN Industrial Display) provides direct physical/electrical execution.
Suffix Breakdown & Model Matrix
The 6176M series specifies panel-mount industrial video display monitors. Suffix designations indicate screen dimensions, power options, and touch screen interface options.
| Base Model | Catalog Number | Display Size | Native Resolution | Video Input Interfaces |
|---|---|---|---|---|
| 6176M | 6176M-17VN | 17.0 inch TFT LCD | 1280 x 1024 (SXGA) | Analog VGA / DVI |
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 6176M-17VN |
| Brand | Allen-Bradley |
| Origin | USA |
| Weight | 4.99 kg (11.00 lbs) |
| Dimensions | Standard 17-inch panel cutout form factor |
| Operating Temp | 0 to 50 deg C |
| Power Consumption | 100-240 VAC / 24 VDC nominal options |
| Display Type | 17.0 inch Active Matrix Color TFT LCD |
| Resolution | 1280 x 1024 pixels |
| Enclosure Rating | NEMA 4/12, IP65 (front panel mounted) |
Backplane Bus Communication and Network Integration
The 6176M-17VN display unit interfaces directly with Allen-Bradley industrial control architectures, supporting high-frequency video communication feeds and deterministic EtherNet/IP network visualization nodes. Backplane bus communication velocity and firmware flash compatibility allow high refresh rates and consistent data throughput when connected to ControlLogix and CompactLogix HMI visualization systems.
Frequently Asked Questions
Q: Can the 6176M-17VN be installed in washdown environments?
A: Yes. When properly installed using the supplied gasket and panel clamps into an enclosure meeting equivalent ratings, the front bezel meets NEMA 4/12 and IP65 standards for water and dust ingress protection.
Q: How is video display calibration adjusted on the 6176M-17VN?
A: Display contrast, brightness, and screen alignment are adjusted via the rear-mounted On-Screen Display (OSD) control buttons.
Q: What power options are available for this industrial monitor?
A: The monitor incorporates an internal autoranging AC power supply accepting 100-240 VAC inputs, as well as direct low-voltage DC power options depending on terminal connection.
Field Installation Guidelines
- Panel Cutout Preparation: Cut the enclosure panel opening to the precise dimensions specified in the template, ensuring all cut edges are deburred and smooth to prevent gasket tearing.
- Gasket Seating: Verify that the watertight sealing gasket is properly seated in the bezel groove around the perimeter of the monitor before insertion into the cutout.
- Clamp Torque: Slide the unit into the cutout and tighten all panel mounting clamps evenly in a cross pattern to a torque of 1.4 Nm (12 in-lb) to maintain NEMA 4/12 seal integrity.
- Protective Grounding: Connect a dedicated grounding wire from the ground lug on the rear chassis of the display directly to the main cabinet protective earth (PE) bus.
Allen-Bradley 6176M-17VN Industrial Display Monitor
Allen-Bradley 6176M-17VN Industrial Display Monitor
Configured for industrial video display and operator interface visualization in Allen-Bradley automation systems, the Allen-Bradley 6176M-17VN (6176M-17VN Industrial Display) provides direct physical/electrical execution.
Suffix Breakdown & Model Matrix
The 6176M series specifies panel-mount industrial video display monitors. Suffix designations indicate screen dimensions, power options, and touch screen interface options.
| Base Model | Catalog Number | Display Size | Native Resolution | Video Input Interfaces |
|---|---|---|---|---|
| 6176M | 6176M-17VN | 17.0 inch TFT LCD | 1280 x 1024 (SXGA) | Analog VGA / DVI |
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 6176M-17VN |
| Brand | Allen-Bradley |
| Origin | USA |
| Weight | 4.99 kg (11.00 lbs) |
| Dimensions | Standard 17-inch panel cutout form factor |
| Operating Temp | 0 to 50 deg C |
| Power Consumption | 100-240 VAC / 24 VDC nominal options |
| Display Type | 17.0 inch Active Matrix Color TFT LCD |
| Resolution | 1280 x 1024 pixels |
| Enclosure Rating | NEMA 4/12, IP65 (front panel mounted) |
Backplane Bus Communication and Network Integration
The 6176M-17VN display unit interfaces directly with Allen-Bradley industrial control architectures, supporting high-frequency video communication feeds and deterministic EtherNet/IP network visualization nodes. Backplane bus communication velocity and firmware flash compatibility allow high refresh rates and consistent data throughput when connected to ControlLogix and CompactLogix HMI visualization systems.
Frequently Asked Questions
Q: Can the 6176M-17VN be installed in washdown environments?
A: Yes. When properly installed using the supplied gasket and panel clamps into an enclosure meeting equivalent ratings, the front bezel meets NEMA 4/12 and IP65 standards for water and dust ingress protection.
Q: How is video display calibration adjusted on the 6176M-17VN?
A: Display contrast, brightness, and screen alignment are adjusted via the rear-mounted On-Screen Display (OSD) control buttons.
Q: What power options are available for this industrial monitor?
A: The monitor incorporates an internal autoranging AC power supply accepting 100-240 VAC inputs, as well as direct low-voltage DC power options depending on terminal connection.
Field Installation Guidelines
- Panel Cutout Preparation: Cut the enclosure panel opening to the precise dimensions specified in the template, ensuring all cut edges are deburred and smooth to prevent gasket tearing.
- Gasket Seating: Verify that the watertight sealing gasket is properly seated in the bezel groove around the perimeter of the monitor before insertion into the cutout.
- Clamp Torque: Slide the unit into the cutout and tighten all panel mounting clamps evenly in a cross pattern to a torque of 1.4 Nm (12 in-lb) to maintain NEMA 4/12 seal integrity.
- Protective Grounding: Connect a dedicated grounding wire from the ground lug on the rear chassis of the display directly to the main cabinet protective earth (PE) bus.
