Allen-Bradley 2711-T6C5L1 PanelView 600 Operator Interface
The Allen-Bradley 2711-T6C5L1 serves as the primary 2711-T6C5L1 Operator Interface utilized to execute process visualization and touch command entry across Allen-Bradley automation platforms.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 2711-T6C5L1 |
| Brand | Allen-Bradley |
| Origin | USA |
| Weight | 0.86 kg (1.90 lbs) |
| Dimensions | Standard PanelView 600 cutout panel format |
| Operating Temp | 0 to 55 deg C |
| Power Consumption | 24 VDC nominal (18-30 VDC range) |
| Display Type | 5.7-inch color active matrix display |
| Resolution | 320 x 234 pixels |
| User Input | Analog resistive touchscreen |
| Communication Ports | RS-232 port supporting DH-485 protocol |
Backplane Bus Communication Velocity and EtherNet/IP Mapping
The Allen-Bradley 2711-T6C5L1 maintains serial point-to-point and multi-node telemetry over its dedicated RS-232 interface using DH-485 protocol framing. Onboard firmware flash compatibility ensures rapid frame processing and synchronous memory address mapping between touchscreen input registers and connected controller data tables. This deterministic message handling prevents packet collisions on serial links and maintains real-time updates for process graphics, system alarms, and bit-level interlocks.
Frequently Asked Questions
Q: What power supply parameters are required for the 24 VDC terminal connection on the 2711-T6C5L1?
A: The module requires a nominal 24 VDC input within an operational range of 18 to 30 VDC. The circuit must be powered by a Class 2 safety-isolated DC supply to prevent ground loop currents from interfering with serial logic.
Q: How is the RS-232 DH-485 communication port wired to an SLC 500 or MicroLogix controller?
A: Connections require an appropriate point-to-point serial cable (such as 2711-NC13) or an AIC+ Advanced Interface Converter module when bridging to a multi-node DH-485 network trunk.
Field Installation Guidelines
- Prepare the panel mounting cutout to exact standard dimensions, ensuring the surface is deburred, clean, and flat.
- Insert the unit into the opening and secure all rear mounting clamps evenly in an alternating cross-pattern to establish NEMA-rated perimeter sealing.
- Wire the 24 VDC power conductors to the terminal block, ensuring correct polarity and connecting the frame earth ground terminal directly to cabinet ground.
- Route serial communication cabling through dedicated low-voltage wireways away from high-voltage AC lines and variable frequency drives.
- Provide at least 50 mm of clear ventilation space around all cabinet heatsink louvers to allow natural convection thermal cooling.
Allen-Bradley 2711-T6C5L1 PanelView 600 Operator Interface
Allen-Bradley 2711-T6C5L1 PanelView 600 Operator Interface
The Allen-Bradley 2711-T6C5L1 serves as the primary 2711-T6C5L1 Operator Interface utilized to execute process visualization and touch command entry across Allen-Bradley automation platforms.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 2711-T6C5L1 |
| Brand | Allen-Bradley |
| Origin | USA |
| Weight | 0.86 kg (1.90 lbs) |
| Dimensions | Standard PanelView 600 cutout panel format |
| Operating Temp | 0 to 55 deg C |
| Power Consumption | 24 VDC nominal (18-30 VDC range) |
| Display Type | 5.7-inch color active matrix display |
| Resolution | 320 x 234 pixels |
| User Input | Analog resistive touchscreen |
| Communication Ports | RS-232 port supporting DH-485 protocol |
Backplane Bus Communication Velocity and EtherNet/IP Mapping
The Allen-Bradley 2711-T6C5L1 maintains serial point-to-point and multi-node telemetry over its dedicated RS-232 interface using DH-485 protocol framing. Onboard firmware flash compatibility ensures rapid frame processing and synchronous memory address mapping between touchscreen input registers and connected controller data tables. This deterministic message handling prevents packet collisions on serial links and maintains real-time updates for process graphics, system alarms, and bit-level interlocks.
Frequently Asked Questions
Q: What power supply parameters are required for the 24 VDC terminal connection on the 2711-T6C5L1?
A: The module requires a nominal 24 VDC input within an operational range of 18 to 30 VDC. The circuit must be powered by a Class 2 safety-isolated DC supply to prevent ground loop currents from interfering with serial logic.
Q: How is the RS-232 DH-485 communication port wired to an SLC 500 or MicroLogix controller?
A: Connections require an appropriate point-to-point serial cable (such as 2711-NC13) or an AIC+ Advanced Interface Converter module when bridging to a multi-node DH-485 network trunk.
Field Installation Guidelines
- Prepare the panel mounting cutout to exact standard dimensions, ensuring the surface is deburred, clean, and flat.
- Insert the unit into the opening and secure all rear mounting clamps evenly in an alternating cross-pattern to establish NEMA-rated perimeter sealing.
- Wire the 24 VDC power conductors to the terminal block, ensuring correct polarity and connecting the frame earth ground terminal directly to cabinet ground.
- Route serial communication cabling through dedicated low-voltage wireways away from high-voltage AC lines and variable frequency drives.
- Provide at least 50 mm of clear ventilation space around all cabinet heatsink louvers to allow natural convection thermal cooling.
