Allen-Bradley 2198-P031 Kinetix 5700 DC-Bus Power Supply
The Allen-Bradley 2198-P031 serves as the primary 2198-P031 DC-Bus Power Supply utilized to execute three-phase AC rectification and DC bus power distribution across Kinetix 5700 drive platforms.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 2198-P031 |
| Brand | Allen-Bradley |
| Origin | USA |
| Weight | 4.79 kg (10.56 lbs) |
| Dimensions | Compact Kinetix 5700 power module frame |
| Operating Temp | 0 to 50 deg C |
| Power Consumption | 7 kW continuous output power |
| Input Voltage | 324-528 VAC three-phase (47-63 Hz) |
| Output Current | 10.5 A continuous DC output |
| System Compatibility | Kinetix 5700 Servo Drive System |
Backplane Bus Communication Velocity and EtherNet/IP Mapping
The Allen-Bradley 2198-P031 power module communicates system health, line status, and DC bus voltage telemetry across deterministic EtherNet/IP networks. Integrated firmware flash compatibility supports seamless cyclic parameter polling by Logix 5000 controllers without introducing network latency. The internal power conversion architecture converts incoming 324-528 VAC three-phase input into stable DC bus power, managing internal pre-charge sequences and overvoltage clamping to protect connected single-axis and dual-axis inverter modules along the shared bus bar.
Frequently Asked Questions
Q: How is power distributed from the 2198-P031 supply module to adjacent servo drives?
A: DC bus power and 24 VDC control power are routed directly across adjacent Kinetix 5700 drive modules through a top-mounted shared-bus bar system.
Q: What input power protection is recommended for the 324-528 VAC three-phase line connection?
A: A appropriately sized circuit breaker or fused disconnect switch, along with an optional line reactor, should be installed upstream to protect against line transients and high fault currents.
Field Installation Guidelines
- Secure the power module vertically onto the enclosure backplane, adhering to zero-stack clearance rules for precise shared DC bus bar alignment.
- Wire the incoming three-phase AC power conductors (324-528 VAC) to the input terminals, ensuring the ground terminal is securely bonded to the main enclosure earth bus.
- Install the shared DC bus bar link across the power supply and adjacent inverter modules, tightening fixing screws to specified engineering torque values.
- Plug EtherNet/IP communication cables into the module ports to enable continuous diagnostic and status monitoring by the system controller.
- Ensure cabinet ambient temperatures remain between 0 and 50 deg C with adequate vertical clearance above and below the module for airflow.
Allen-Bradley 2198-P031 Kinetix 5700 DC-Bus Power Supply
Allen-Bradley 2198-P031 Kinetix 5700 DC-Bus Power Supply
The Allen-Bradley 2198-P031 serves as the primary 2198-P031 DC-Bus Power Supply utilized to execute three-phase AC rectification and DC bus power distribution across Kinetix 5700 drive platforms.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 2198-P031 |
| Brand | Allen-Bradley |
| Origin | USA |
| Weight | 4.79 kg (10.56 lbs) |
| Dimensions | Compact Kinetix 5700 power module frame |
| Operating Temp | 0 to 50 deg C |
| Power Consumption | 7 kW continuous output power |
| Input Voltage | 324-528 VAC three-phase (47-63 Hz) |
| Output Current | 10.5 A continuous DC output |
| System Compatibility | Kinetix 5700 Servo Drive System |
Backplane Bus Communication Velocity and EtherNet/IP Mapping
The Allen-Bradley 2198-P031 power module communicates system health, line status, and DC bus voltage telemetry across deterministic EtherNet/IP networks. Integrated firmware flash compatibility supports seamless cyclic parameter polling by Logix 5000 controllers without introducing network latency. The internal power conversion architecture converts incoming 324-528 VAC three-phase input into stable DC bus power, managing internal pre-charge sequences and overvoltage clamping to protect connected single-axis and dual-axis inverter modules along the shared bus bar.
Frequently Asked Questions
Q: How is power distributed from the 2198-P031 supply module to adjacent servo drives?
A: DC bus power and 24 VDC control power are routed directly across adjacent Kinetix 5700 drive modules through a top-mounted shared-bus bar system.
Q: What input power protection is recommended for the 324-528 VAC three-phase line connection?
A: A appropriately sized circuit breaker or fused disconnect switch, along with an optional line reactor, should be installed upstream to protect against line transients and high fault currents.
Field Installation Guidelines
- Secure the power module vertically onto the enclosure backplane, adhering to zero-stack clearance rules for precise shared DC bus bar alignment.
- Wire the incoming three-phase AC power conductors (324-528 VAC) to the input terminals, ensuring the ground terminal is securely bonded to the main enclosure earth bus.
- Install the shared DC bus bar link across the power supply and adjacent inverter modules, tightening fixing screws to specified engineering torque values.
- Plug EtherNet/IP communication cables into the module ports to enable continuous diagnostic and status monitoring by the system controller.
- Ensure cabinet ambient temperatures remain between 0 and 50 deg C with adequate vertical clearance above and below the module for airflow.
