Allen-Bradley 1783-BMS10CL Stratix 5700 Managed Ethernet Switch
The Allen-Bradley 1783-BMS10CL, also cataloged as the 1783-BMS10CL Industrial Ethernet Switch, operates as a dedicated hardware component for deterministic packet switching and network traffic routing within Allen-Bradley Stratix 5700 networks. It provides multi-port Fast/Gigabit Ethernet connectivity across eight dedicated copper RJ45 ports and two combo uplink ports to execute real-time communication between industrial controllers and distributed automation hardware.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 1783-BMS10CL |
| Brand | Allen-Bradley |
| Origin | USA |
| Weight | 3.25 lbs (1.47 kg) |
| Dimensions | Standard Stratix 5700 switch enclosure |
| Operating Temp | -40 to 60 deg C |
| Power Consumption | 12.5 W at 24 VDC (17 W max power dissipation) |
| Input Voltage Rating | 12 to 48 VDC (0.5 to 2 A max input) |
| Total Port Count | 10 Ports (8 RJ45 copper ports, 2 combo ports) |
| Enclosure Rating | IP30 |
| Isolation Voltage | 50 V continuous |
| Electrostatic Discharge | 8 kV contact discharge, 15 kV air discharge |
| Vibration / Shock | 2 G operational (10 to 500 Hz) / 30 G operational shock |
| Wiring Compatibility | 20 to 18 AWG copper wire (power and alarm terminals) |
EtherNet/IP Deterministic Networks & Firmware Flash Compatibility
The 1783-BMS10CL integrates advanced Cisco technology firmware flash compatibility to deliver deterministic performance over EtherNet/IP industrial automation backbones. Internal firmware architecture maintains high backplane bus communication velocity and supports CIP (Common Industrial Protocol) diagnostics for integration directly into Logix control environments. The switch actively manages packet prioritization via IEEE 1588 Precision Time Protocol (PTP) and IEEE 802.1p Quality of Service (QoS), preventing packet collisions and latency variation across critical I/O traffic loops.
Frequently Asked Questions
Q: What wire size ranges are acceptable for connecting power and alarm circuits to the 1783-BMS10CL?
A: Both the DC power connector and alarm relay connector accept 20 to 18 AWG (0.5 to 0.8 mm sq) solid or stranded copper conductors.
Q: How do the two combo ports function on the 1783-BMS10CL?
A: Each combo port pair consists of one RJ45 copper interface and one SFP slot. Only one media interface within each combo pair can be active at a single time for network transmission.
Q: What electrostatic discharge (ESD) immunity standards apply to this hardware?
A: The switch features built-in ESD protection rated for up to 8 kV contact discharges and up to 15 kV air discharges without operational interruption.
Field Installation Guidelines
- DIN Rail & Cabinet Mounting: Mount the 1783-BMS10CL vertically on a standard 35 mm DIN rail inside an enclosure providing adequate ingress protection. Maintain vertical clearance around cooling vents to support natural convection.
- Power Terminal Wiring: Strip 20 to 18 AWG copper wires to specification and attach to the removable 12 to 48 VDC input power plug. Ensure dual power sources are connected if power redundancy is required.
- Equipotential Grounding: Attach a dedicated copper earth conductor from the chassis grounding lug directly to the industrial enclosure single-point ground bus bar to maximize noise immunity and surge protection.
Allen-Bradley 1783-BMS10CL Stratix 5700 Managed Ethernet Switch
Allen-Bradley 1783-BMS10CL Stratix 5700 Managed Ethernet Switch
The Allen-Bradley 1783-BMS10CL, also cataloged as the 1783-BMS10CL Industrial Ethernet Switch, operates as a dedicated hardware component for deterministic packet switching and network traffic routing within Allen-Bradley Stratix 5700 networks. It provides multi-port Fast/Gigabit Ethernet connectivity across eight dedicated copper RJ45 ports and two combo uplink ports to execute real-time communication between industrial controllers and distributed automation hardware.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 1783-BMS10CL |
| Brand | Allen-Bradley |
| Origin | USA |
| Weight | 3.25 lbs (1.47 kg) |
| Dimensions | Standard Stratix 5700 switch enclosure |
| Operating Temp | -40 to 60 deg C |
| Power Consumption | 12.5 W at 24 VDC (17 W max power dissipation) |
| Input Voltage Rating | 12 to 48 VDC (0.5 to 2 A max input) |
| Total Port Count | 10 Ports (8 RJ45 copper ports, 2 combo ports) |
| Enclosure Rating | IP30 |
| Isolation Voltage | 50 V continuous |
| Electrostatic Discharge | 8 kV contact discharge, 15 kV air discharge |
| Vibration / Shock | 2 G operational (10 to 500 Hz) / 30 G operational shock |
| Wiring Compatibility | 20 to 18 AWG copper wire (power and alarm terminals) |
EtherNet/IP Deterministic Networks & Firmware Flash Compatibility
The 1783-BMS10CL integrates advanced Cisco technology firmware flash compatibility to deliver deterministic performance over EtherNet/IP industrial automation backbones. Internal firmware architecture maintains high backplane bus communication velocity and supports CIP (Common Industrial Protocol) diagnostics for integration directly into Logix control environments. The switch actively manages packet prioritization via IEEE 1588 Precision Time Protocol (PTP) and IEEE 802.1p Quality of Service (QoS), preventing packet collisions and latency variation across critical I/O traffic loops.
Frequently Asked Questions
Q: What wire size ranges are acceptable for connecting power and alarm circuits to the 1783-BMS10CL?
A: Both the DC power connector and alarm relay connector accept 20 to 18 AWG (0.5 to 0.8 mm sq) solid or stranded copper conductors.
Q: How do the two combo ports function on the 1783-BMS10CL?
A: Each combo port pair consists of one RJ45 copper interface and one SFP slot. Only one media interface within each combo pair can be active at a single time for network transmission.
Q: What electrostatic discharge (ESD) immunity standards apply to this hardware?
A: The switch features built-in ESD protection rated for up to 8 kV contact discharges and up to 15 kV air discharges without operational interruption.
Field Installation Guidelines
- DIN Rail & Cabinet Mounting: Mount the 1783-BMS10CL vertically on a standard 35 mm DIN rail inside an enclosure providing adequate ingress protection. Maintain vertical clearance around cooling vents to support natural convection.
- Power Terminal Wiring: Strip 20 to 18 AWG copper wires to specification and attach to the removable 12 to 48 VDC input power plug. Ensure dual power sources are connected if power redundancy is required.
- Equipotential Grounding: Attach a dedicated copper earth conductor from the chassis grounding lug directly to the industrial enclosure single-point ground bus bar to maximize noise immunity and surge protection.
