Allen-Bradley 1756-SYNCH ControlLogix SynchLink Communication Module
The 1756-SYNCH is an Allen-Bradley ControlLogix SynchLink Communication Module designed to exchange synchronized data between ControlLogix chassis through fiber-optic connections. It supports high-speed data broadcasting, chassis time synchronization, and motion axis data distribution between controllers. The module operates at a 5 Mbps data rate using a 650 nm optical wavelength and supports synchronous communication with a 50 us frame speed.
SynchLink Communication and Motion Coordination
The 1756-SYNCH provides a communication link between a ControlLogix chassis and a SynchLink fiber-optic network. It broadcasts data between connected chassis and coordinates system time across multiple ControlLogix controllers.
This synchronized data exchange allows motion axis information to be consumed by controllers in different chassis. It is particularly relevant to distributed drive and motion control architectures where coordinated timing and data availability are required.
Fiber-Optic Interface
The module provides two fiber-optic cable ports for SynchLink communication. It uses a 650 nm red optical wavelength and supports a 5 Mbps data rate. The specified fiber-optic cable length ranges from 1 to 300 m.
The supported cable specification is 200-230 micron HCS (Hard-Clad Silica) fiber with a VersaLink V-System termination. Compatible cable assemblies listed in the supplied information include the 1403-CFxxx fiber-optic cable assembly and 200 um HCP-M0200T V01RK simplex cable.
Synchronous Data Frame
The 1756-SYNCH uses a defined communication frame structure for synchronized data transmission. The documented frame speed is 50 us, with the frame divided into control, data, flag, and error-checking fields.
| Frame Component | Specification |
|---|---|
| Flags | 3 bytes |
| Control Field | 1 byte |
| Data Field | 24 bytes |
| CRC Field | 2 bytes |
| Total Frame Length | 30 bytes |
The CRC field provides an error-checking mechanism for transmitted frame data, while the control and flag fields support communication management. The 24-byte data field carries the information exchanged across the SynchLink network.
ControlLogix Installation and Power Requirements
The 1756-SYNCH is designed for installation in a ControlLogix chassis and can occupy any available slot. It draws power from the chassis backplane, with specified current requirements on both the 5.1 VDC and 24 VDC supply rails.
The module supports standard and redundant ControlLogix power supply configurations. Its maximum power dissipation is approximately 6.2 W, with a corresponding thermal dissipation of 21.2 BTU/hr. The specified operating temperature range is 0-60 deg C.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | 1756-SYNCH |
| Brand | Allen-Bradley |
| Product Line | ControlLogix |
| Module Type | SynchLink Communication Module |
| Product Type | Fiber-Optic Communication Module |
| Part Number | 1756-SYNCH |
| GTIN | 10612598275301 |
| UPC | 10612598307699 |
| Data Rate | 5 Mbps |
| Operating Wavelength | 650 nm |
| Communication Frame Speed | 50 us |
| Fiber-Optic Ports | 2 |
| Fiber Cable Length | 1-300 m |
| Fiber Type | 200-230 micron HCS (Hard-Clad Silica) |
| Fiber Termination | VersaLink V-System |
| Backplane Current (5.1 VDC) | 1,200 mA |
| Backplane Current (24 VDC) | 3 mA |
| Power Dissipation (Max.) | 6.2 W |
| Thermal Dissipation | 21.2 BTU/hr |
| Installation | ControlLogix Chassis |
| Chassis Slot Requirement | Any available slot |
| Wire Size | 20 AWG |
| Operating Temperature | 0-60 deg C (32-140 deg F) |
| Operating Shock | 30 g |
| Enclosure | None |
| Weight | 1.31 lbs (0.60 kg) |
Compatible Fiber-Optic Accessories
The following accessories are identified in the supplied product description for use with the 1756-SYNCH:
- 1403-CFxxx: Fiber-optic cable assembly.
- HCP-M0200T V01RK: 200 um simplex fiber-optic cable.
Confirm cable length, fiber construction, and connector termination before ordering replacement cables or assembling a SynchLink connection.
Frequently Asked Questions
Q: What is the function of the Allen-Bradley 1756-SYNCH module?
A: The 1756-SYNCH provides SynchLink communication between ControlLogix chassis. It broadcasts data, synchronizes system time, and allows motion axis information to be shared between controllers in different chassis.
Q: Which fiber-optic cables are compatible with the 1756-SYNCH?
A: The supplied specifications identify 200-230 micron HCS fiber with VersaLink V-System termination. The listed accessories include the 1403-CFxxx cable assembly and HCP-M0200T V01RK simplex cable. The specified cable length is 1-300 m.
Q: Can the 1756-SYNCH be installed in any ControlLogix chassis slot?
A: Yes. The supplied product description specifies installation in any available slot of a ControlLogix chassis. The module draws operating power from the chassis backplane and supports standard and redundant power supply configurations.
Allen-Bradley 1756-SYNCH ControlLogix SynchLink Communication Module
Allen-Bradley 1756-SYNCH ControlLogix SynchLink Communication Module
The 1756-SYNCH is an Allen-Bradley ControlLogix SynchLink Communication Module designed to exchange synchronized data between ControlLogix chassis through fiber-optic connections. It supports high-speed data broadcasting, chassis time synchronization, and motion axis data distribution between controllers. The module operates at a 5 Mbps data rate using a 650 nm optical wavelength and supports synchronous communication with a 50 us frame speed.
SynchLink Communication and Motion Coordination
The 1756-SYNCH provides a communication link between a ControlLogix chassis and a SynchLink fiber-optic network. It broadcasts data between connected chassis and coordinates system time across multiple ControlLogix controllers.
This synchronized data exchange allows motion axis information to be consumed by controllers in different chassis. It is particularly relevant to distributed drive and motion control architectures where coordinated timing and data availability are required.
Fiber-Optic Interface
The module provides two fiber-optic cable ports for SynchLink communication. It uses a 650 nm red optical wavelength and supports a 5 Mbps data rate. The specified fiber-optic cable length ranges from 1 to 300 m.
The supported cable specification is 200-230 micron HCS (Hard-Clad Silica) fiber with a VersaLink V-System termination. Compatible cable assemblies listed in the supplied information include the 1403-CFxxx fiber-optic cable assembly and 200 um HCP-M0200T V01RK simplex cable.
Synchronous Data Frame
The 1756-SYNCH uses a defined communication frame structure for synchronized data transmission. The documented frame speed is 50 us, with the frame divided into control, data, flag, and error-checking fields.
| Frame Component | Specification |
|---|---|
| Flags | 3 bytes |
| Control Field | 1 byte |
| Data Field | 24 bytes |
| CRC Field | 2 bytes |
| Total Frame Length | 30 bytes |
The CRC field provides an error-checking mechanism for transmitted frame data, while the control and flag fields support communication management. The 24-byte data field carries the information exchanged across the SynchLink network.
ControlLogix Installation and Power Requirements
The 1756-SYNCH is designed for installation in a ControlLogix chassis and can occupy any available slot. It draws power from the chassis backplane, with specified current requirements on both the 5.1 VDC and 24 VDC supply rails.
The module supports standard and redundant ControlLogix power supply configurations. Its maximum power dissipation is approximately 6.2 W, with a corresponding thermal dissipation of 21.2 BTU/hr. The specified operating temperature range is 0-60 deg C.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | 1756-SYNCH |
| Brand | Allen-Bradley |
| Product Line | ControlLogix |
| Module Type | SynchLink Communication Module |
| Product Type | Fiber-Optic Communication Module |
| Part Number | 1756-SYNCH |
| GTIN | 10612598275301 |
| UPC | 10612598307699 |
| Data Rate | 5 Mbps |
| Operating Wavelength | 650 nm |
| Communication Frame Speed | 50 us |
| Fiber-Optic Ports | 2 |
| Fiber Cable Length | 1-300 m |
| Fiber Type | 200-230 micron HCS (Hard-Clad Silica) |
| Fiber Termination | VersaLink V-System |
| Backplane Current (5.1 VDC) | 1,200 mA |
| Backplane Current (24 VDC) | 3 mA |
| Power Dissipation (Max.) | 6.2 W |
| Thermal Dissipation | 21.2 BTU/hr |
| Installation | ControlLogix Chassis |
| Chassis Slot Requirement | Any available slot |
| Wire Size | 20 AWG |
| Operating Temperature | 0-60 deg C (32-140 deg F) |
| Operating Shock | 30 g |
| Enclosure | None |
| Weight | 1.31 lbs (0.60 kg) |
Compatible Fiber-Optic Accessories
The following accessories are identified in the supplied product description for use with the 1756-SYNCH:
- 1403-CFxxx: Fiber-optic cable assembly.
- HCP-M0200T V01RK: 200 um simplex fiber-optic cable.
Confirm cable length, fiber construction, and connector termination before ordering replacement cables or assembling a SynchLink connection.
Frequently Asked Questions
Q: What is the function of the Allen-Bradley 1756-SYNCH module?
A: The 1756-SYNCH provides SynchLink communication between ControlLogix chassis. It broadcasts data, synchronizes system time, and allows motion axis information to be shared between controllers in different chassis.
Q: Which fiber-optic cables are compatible with the 1756-SYNCH?
A: The supplied specifications identify 200-230 micron HCS fiber with VersaLink V-System termination. The listed accessories include the 1403-CFxxx cable assembly and HCP-M0200T V01RK simplex cable. The specified cable length is 1-300 m.
Q: Can the 1756-SYNCH be installed in any ControlLogix chassis slot?
A: Yes. The supplied product description specifies installation in any available slot of a ControlLogix chassis. The module draws operating power from the chassis backplane and supports standard and redundant power supply configurations.
