GE Fanuc|DS200SLCG3AHD| Analog I/O Module
GE Fanuc DS200SLCG3AHD Analog I/O Module
Description
The GE Fanuc DS200SLCG3AHD is a Mark V Speedtronic control system Analog I/O Board designed for signal scaling, conditioning, and processing of turbine sensor data across multiple I/O cores.
The GE Fanuc DS200SLCG3AHD is a Mark V Speedtronic control system Analog I/O Board designed for signal scaling, conditioning, and processing of turbine sensor data across multiple I/O cores.
Features
- Processes LVDT, servo valve, thermocouple, 4-20 mA, vibration, and generator signals.
- Configurable via hardware jumpers (J1-J8) for signal type and range selection.
- Provides signal buffering and isolation for critical turbine monitoring.
- Integrates seamlessly with GE LS2100 and Mark V control architectures.
Technical Specifications
- System Compatibility: GE Mark V Speedtronic Control System.
- Signal Channels: 16 analog input/output channels (8 inputs, 8 outputs).
- Input Ranges: 4-20 mA, 0-10 VDC, ±5 Vpp for thermocouples.
- Output Configuration: J1/J2 for milliamp circuit selection; J5/J6 for 20 mA/200 mA range.
- Operating Temperature: 0°C to 60°C continuous operation.
- Power Requirements: 5 VDC logic supply, ±15 VDC analog supply (via TCPS board).
- Response Time: 10 ms for real-time turbine control processing.
- Physical Dimensions: 10.4 inches × 10.4 inches (Eurocard standard).
- Weight: 1.8 kilograms (4 lbs).
- Isolation: 1500 VDC between I/O and system ground.
- Manufacturing Status: Discontinued; available as refurbished surplus.
- Connector Type: 3PL data bus interface, JE for generator signals.
- Environmental Rating: IP20 (dust-protected, no liquid resistance).
GE Fanuc|DS200SLCG3AHD| Analog I/O Module
Produk saat ini
Saat ini
Penjual:
GE Fanuc
GE Fanuc|DS200SLCG3AHD| Analog I/O Module
Harga normal
$280.00
Harga penjualan
$280.00
Harga normal
$580.00
Pilihan
Deskripsi
GE Fanuc DS200SLCG3AHD Analog I/O Module
Description
The GE Fanuc DS200SLCG3AHD is a Mark V Speedtronic control system Analog I/O Board designed for signal scaling, conditioning, and processing of turbine sensor data across multiple I/O cores.
The GE Fanuc DS200SLCG3AHD is a Mark V Speedtronic control system Analog I/O Board designed for signal scaling, conditioning, and processing of turbine sensor data across multiple I/O cores.
Features
- Processes LVDT, servo valve, thermocouple, 4-20 mA, vibration, and generator signals.
- Configurable via hardware jumpers (J1-J8) for signal type and range selection.
- Provides signal buffering and isolation for critical turbine monitoring.
- Integrates seamlessly with GE LS2100 and Mark V control architectures.
Technical Specifications
- System Compatibility: GE Mark V Speedtronic Control System.
- Signal Channels: 16 analog input/output channels (8 inputs, 8 outputs).
- Input Ranges: 4-20 mA, 0-10 VDC, ±5 Vpp for thermocouples.
- Output Configuration: J1/J2 for milliamp circuit selection; J5/J6 for 20 mA/200 mA range.
- Operating Temperature: 0°C to 60°C continuous operation.
- Power Requirements: 5 VDC logic supply, ±15 VDC analog supply (via TCPS board).
- Response Time: 10 ms for real-time turbine control processing.
- Physical Dimensions: 10.4 inches × 10.4 inches (Eurocard standard).
- Weight: 1.8 kilograms (4 lbs).
- Isolation: 1500 VDC between I/O and system ground.
- Manufacturing Status: Discontinued; available as refurbished surplus.
- Connector Type: 3PL data bus interface, JE for generator signals.
- Environmental Rating: IP20 (dust-protected, no liquid resistance).
