GE Fanuc|IS200VVIBH1CAC|Vibration Monitor Input Module
GE Fanuc IS200VVIBH1CAC Vibration Monitor Input Module
Description
The GE Fanuc IS200VVIBH1CAC is a specialized Vibration Monitor Input module designed for the Mark VI control system to acquire and process critical vibration data from turbine proximity probes and seismic sensors.
The GE Fanuc IS200VVIBH1CAC is a specialized Vibration Monitor Input module designed for the Mark VI control system to acquire and process critical vibration data from turbine proximity probes and seismic sensors.
Features
- High-resolution vibration signal processing
- Integrated probe excitation and conditioning
- Real-time diagnostic and fault detection
- Hot-swappable design for continuous operation
Technical Specifications
- System Compatibility: GE Speedtronics Mark VI Distributed Control System
- Module Type: Vibration Monitor Input (VVI)
- Input Channels: 8 independent vibration input channels
- Sensor Compatibility: Eddy current proximity probes and seismic sensors
- Probe Excitation Voltage: -24 VDC nominal (configurable -18 VDC to -24 VDC)
- Signal Frequency Range: 0.5 Hz to 10,000 Hz bandwidth
- Resolution: 24-bit analog-to-digital conversion
- Accuracy: ±0.5% of full scale at 25°C
- Sampling Rate: Up to 20,000 samples per second per channel
- Input Impedance: 100 kΩ minimum
- Operating Temperature: -30°C to +65°C ambient range
- Storage Temperature: -40°C to +85°C non-operating
- Relative Humidity: 5% to 95% non-condensing
- Isolation Voltage: 500 VAC RMS channel-to-ground
- Power Consumption: 15 Watts typical at full load
- Supply Voltage: 28 VDC nominal input (range 18-32 VDC)
- Connector Interface: DC-37 pin male connector with locking mechanism
- MTBF: Over 120,000 hours calculated mean time between failures
- Dimensions: 16.5 cm height by 12.0 cm depth standard form factor
- Weight: Approximately 0.50 kilograms per unit
- Mounting Style: Backplane slot installation with guide rails
- LED Indicators: Channel status, module fault, and communication lights
- Certification: UL, CE, and CSA approved for hazardous locations
GE Fanuc|IS200VVIBH1CAC|Vibration Monitor Input Module
محصول فعلی
جاری
فروشنده:
GE Fanuc
GE Fanuc|IS200VVIBH1CAC|Vibration Monitor Input Module
قیمت عادی
$240.00
قیمت فروش
$240.00
قیمت عادی
$590.00
گزینه ها
توضیحات
GE Fanuc IS200VVIBH1CAC Vibration Monitor Input Module
Description
The GE Fanuc IS200VVIBH1CAC is a specialized Vibration Monitor Input module designed for the Mark VI control system to acquire and process critical vibration data from turbine proximity probes and seismic sensors.
The GE Fanuc IS200VVIBH1CAC is a specialized Vibration Monitor Input module designed for the Mark VI control system to acquire and process critical vibration data from turbine proximity probes and seismic sensors.
Features
- High-resolution vibration signal processing
- Integrated probe excitation and conditioning
- Real-time diagnostic and fault detection
- Hot-swappable design for continuous operation
Technical Specifications
- System Compatibility: GE Speedtronics Mark VI Distributed Control System
- Module Type: Vibration Monitor Input (VVI)
- Input Channels: 8 independent vibration input channels
- Sensor Compatibility: Eddy current proximity probes and seismic sensors
- Probe Excitation Voltage: -24 VDC nominal (configurable -18 VDC to -24 VDC)
- Signal Frequency Range: 0.5 Hz to 10,000 Hz bandwidth
- Resolution: 24-bit analog-to-digital conversion
- Accuracy: ±0.5% of full scale at 25°C
- Sampling Rate: Up to 20,000 samples per second per channel
- Input Impedance: 100 kΩ minimum
- Operating Temperature: -30°C to +65°C ambient range
- Storage Temperature: -40°C to +85°C non-operating
- Relative Humidity: 5% to 95% non-condensing
- Isolation Voltage: 500 VAC RMS channel-to-ground
- Power Consumption: 15 Watts typical at full load
- Supply Voltage: 28 VDC nominal input (range 18-32 VDC)
- Connector Interface: DC-37 pin male connector with locking mechanism
- MTBF: Over 120,000 hours calculated mean time between failures
- Dimensions: 16.5 cm height by 12.0 cm depth standard form factor
- Weight: Approximately 0.50 kilograms per unit
- Mounting Style: Backplane slot installation with guide rails
- LED Indicators: Channel status, module fault, and communication lights
- Certification: UL, CE, and CSA approved for hazardous locations
