GE Fanuc|IS200ICBDH1ACB|Analog I/O Module
GE IS200ICBDH1ACB Analog I/O Module
Description
The GE IS200ICBDH1ACB is an Analog Input/Output module produced by General Electric as part of the Mark V Speedtronic gas turbine control system.
Features
Scales and conditions multiple analog signals from terminal boards. Interfaces with core control boards for turbine monitoring and actuation.
Technical Specifications
- Series: Mark V turbine control system
- Signal Types Supported: LVDT inputs, servo valve outputs, thermocouple inputs, 4–20 mA inputs/outputs, vibration inputs, relay driver outputs, pulse inputs, voltage inputs, generator and line signals
- Connector Interfaces: 3PL (data bus to STCA/TCQA/TCQE), JE (communication with TCQC board), JB (4–20 mA I/O via TBQC), JF (LVDT inputs from TBQC JFR), JG (±10 VDC and vibration inputs from TBQB JGR)
- Current Output Configuration: Jumpers J5/J6 select 20 mA or 200 mA output range
- Diagnostic Interface: RS232 test port enabled via jumper J7
- Power Source: Supplied through 2PL from TCPS board
- Operating Temperature: 0°C to 60°C
- Mounting Location: Installed in I/O cores R1, R2, or R3
GE Fanuc|IS200ICBDH1ACB|Analog I/O Module
محصول فعلی
جاری
فروشنده:
GE Fanuc
GE Fanuc|IS200ICBDH1ACB|Analog I/O Module
قیمت عادی
$250.00
قیمت فروش
$250.00
قیمت عادی
$510.00
گزینه ها
توضیحات
GE IS200ICBDH1ACB Analog I/O Module
Description
The GE IS200ICBDH1ACB is an Analog Input/Output module produced by General Electric as part of the Mark V Speedtronic gas turbine control system.
Features
Scales and conditions multiple analog signals from terminal boards. Interfaces with core control boards for turbine monitoring and actuation.
Technical Specifications
- Series: Mark V turbine control system
- Signal Types Supported: LVDT inputs, servo valve outputs, thermocouple inputs, 4–20 mA inputs/outputs, vibration inputs, relay driver outputs, pulse inputs, voltage inputs, generator and line signals
- Connector Interfaces: 3PL (data bus to STCA/TCQA/TCQE), JE (communication with TCQC board), JB (4–20 mA I/O via TBQC), JF (LVDT inputs from TBQC JFR), JG (±10 VDC and vibration inputs from TBQB JGR)
- Current Output Configuration: Jumpers J5/J6 select 20 mA or 200 mA output range
- Diagnostic Interface: RS232 test port enabled via jumper J7
- Power Source: Supplied through 2PL from TCPS board
- Operating Temperature: 0°C to 60°C
- Mounting Location: Installed in I/O cores R1, R2, or R3
