Bently Nevada|9200-01-01-11-04|Seismoprobe Velocity Transducer
Bently Nevada 9200-01-01-11-04 Seismoprobe Velocity Transducer
Description
The Bently Nevada 9200 Seismoprobe is a two-wire moving-coil velocity transducer designed for absolute vibration measurement on bearing housings, casings, or structural components. It generates a voltage output proportional to vibration velocity without requiring external power.
Features
- Moving-coil technology for low sensitivity to impact/impulsive signals
- ATEX/IECEx certified for hazardous areas (Class I Zone 2)
- Isolated M10X1 mounting base for reduced interference
- Integral cable options for corrosive environments
Technical Specifications
Electrical Performance
- Sensitivity: 20 mV/mm/s (±5%) at 100 Hz, 25 mm/s vibration
- Frequency Range: 4.5–1000 Hz (±0, -3dB)
- Dynamic Range: 2.54 mm peak-to-peak displacement, 25 mm/s velocity
- Coil Resistance: 1.25 kΩ ±5%; Inductance: 125 mH
- Transverse Sensitivity: ≤10% of primary axis
Environmental Durability
- Operating Temperature: -29°C to +121°C
- Humidity: 95% non-condensing (100% with integral cable)
- Shock Resistance: 50 g (non-sensitive axis)
Mechanical Design
- Dimensions: 41 mm diameter × 102 mm height
- Weight: 300 g
- Mounting: Isolated M10X1 stud (5.6 N·m torque)
Certifications
- Complies with FCC Part 15
- EMC Directive 2014/30/EU
- RoHS 2011/65/EU
- Hazardous Area: ATEX/IECEx II 1G (T6 @ -20°C to +40°C)
Ordering Configuration
- Mounting Angle: 0° (±2.5°, 4.5 Hz minimum frequency)
- Connector: Top mount (no cable)
- Agency Approval: ATEX/IECEx (Option 04)
Bently Nevada|9200-01-01-11-04|Seismoprobe Velocity Transducer
Bently Nevada|9200-01-01-11-04|Seismoprobe Velocity Transducer
Bently Nevada 9200-01-01-11-04 Seismoprobe Velocity Transducer
Description
The Bently Nevada 9200 Seismoprobe is a two-wire moving-coil velocity transducer designed for absolute vibration measurement on bearing housings, casings, or structural components. It generates a voltage output proportional to vibration velocity without requiring external power.
Features
- Moving-coil technology for low sensitivity to impact/impulsive signals
- ATEX/IECEx certified for hazardous areas (Class I Zone 2)
- Isolated M10X1 mounting base for reduced interference
- Integral cable options for corrosive environments
Technical Specifications
Electrical Performance
- Sensitivity: 20 mV/mm/s (±5%) at 100 Hz, 25 mm/s vibration
- Frequency Range: 4.5–1000 Hz (±0, -3dB)
- Dynamic Range: 2.54 mm peak-to-peak displacement, 25 mm/s velocity
- Coil Resistance: 1.25 kΩ ±5%; Inductance: 125 mH
- Transverse Sensitivity: ≤10% of primary axis
Environmental Durability
- Operating Temperature: -29°C to +121°C
- Humidity: 95% non-condensing (100% with integral cable)
- Shock Resistance: 50 g (non-sensitive axis)
Mechanical Design
- Dimensions: 41 mm diameter × 102 mm height
- Weight: 300 g
- Mounting: Isolated M10X1 stud (5.6 N·m torque)
Certifications
- Complies with FCC Part 15
- EMC Directive 2014/30/EU
- RoHS 2011/65/EU
- Hazardous Area: ATEX/IECEx II 1G (T6 @ -20°C to +40°C)
Ordering Configuration
- Mounting Angle: 0° (±2.5°, 4.5 Hz minimum frequency)
- Connector: Top mount (no cable)
- Agency Approval: ATEX/IECEx (Option 04)
