GE Fanuc|IC660BBR100|Normally Closed Relay Output Block
GE Fanuc IC660BBR100 Normally Closed Relay Output Block
Description
The GE Fanuc IC660BBR100 is a 16-circuit normally closed relay output block in the Genius I/O series, featuring four isolated groups of four relay outputs each.
Features
- Normally closed relay contacts (conductive when de-energized)
- Four independent output groups with individual power sources
- Configurable via handheld monitor for power-up behavior and redundancy
- Built-in LED indicators for unit status and relay coil state
Technical Specifications
- Output points: 16 (4 groups × 4 relays)
- Rated voltage: 115 VAC or 230 VAC (factory jumper-selectable)
- Operating voltage range: 93–132 VAC or 185–265 VAC
- Load current: 2 A per circuit
- Switching capacity: 125 VA / 60 W
- Inrush current: 2 A (max)
- Output voltage range: 5–250 VAC or 5–220 VDC
- Minimum load: 10 mA
- Switching frequency: up to 20 cycles/minute (inductive loads)
- Turn-on delay: ≤5 ms
- Contact resistance: ≤100 mΩ
- Isolation: 1500 VAC between groups and to chassis
- Power consumption: 87 mA @ 115 VAC
- Heat dissipation: 10.1 W max (all outputs energized)
- Dimensions: 8.83 in × 3.50 in × 3.94 in
- Weight: 4 lbs (1.8 kg)
- Operating temperature: 0°C to +60°C
- Humidity: 5% to 95%, non-condensing
- Vibration rating: 5–10 Hz @ 0.2 in, 10–200 Hz @ 1 G
GE Fanuc|IC660BBR100|Normally Closed Relay Output Block
GE Fanuc|IC660BBR100|Normally Closed Relay Output Block
GE Fanuc IC660BBR100 Normally Closed Relay Output Block
Description
The GE Fanuc IC660BBR100 is a 16-circuit normally closed relay output block in the Genius I/O series, featuring four isolated groups of four relay outputs each.
Features
- Normally closed relay contacts (conductive when de-energized)
- Four independent output groups with individual power sources
- Configurable via handheld monitor for power-up behavior and redundancy
- Built-in LED indicators for unit status and relay coil state
Technical Specifications
- Output points: 16 (4 groups × 4 relays)
- Rated voltage: 115 VAC or 230 VAC (factory jumper-selectable)
- Operating voltage range: 93–132 VAC or 185–265 VAC
- Load current: 2 A per circuit
- Switching capacity: 125 VA / 60 W
- Inrush current: 2 A (max)
- Output voltage range: 5–250 VAC or 5–220 VDC
- Minimum load: 10 mA
- Switching frequency: up to 20 cycles/minute (inductive loads)
- Turn-on delay: ≤5 ms
- Contact resistance: ≤100 mΩ
- Isolation: 1500 VAC between groups and to chassis
- Power consumption: 87 mA @ 115 VAC
- Heat dissipation: 10.1 W max (all outputs energized)
- Dimensions: 8.83 in × 3.50 in × 3.94 in
- Weight: 4 lbs (1.8 kg)
- Operating temperature: 0°C to +60°C
- Humidity: 5% to 95%, non-condensing
- Vibration rating: 5–10 Hz @ 0.2 in, 10–200 Hz @ 1 G
