Woodward|9907-1199|Hand-Held Programmer
Woodward 9907-1199 Hand-Held Programmer
Description
The Woodward 9907-1199 is a dedicated hand-held programmer designed for configuring and monitoring the Peak 150 control module, enabling menu-driven programming via a service port for industrial engine/turbine speed and load control systems.
Features
- Menu-Driven Interface: Simplifies programming with CONFIGURE and SERVICE modes for parameter adjustment.
- Dual-Mode Operation: Configures control settings (requires turbine shutdown in CONFIGURE mode) and adjusts parameters on-the-fly (SERVICE mode during operation).
- Secure Connectivity: Connects to the Peak 150’s 9-pin RS-485/422 service port; removable cover seals port when not in use to prevent tampering.
- Safety Compliance: Includes explosion hazard warnings for use in hazardous environments (never connect/disconnect in explosive atmospheres).
- Multi-Function Keypad: Offers intuitive navigation with arrow keys, numeric input, and dedicated function keys (e.g., SAVE, ESC, ID).
Technical Specifications
- Display:
- 4-line digital display showing two independent parameters simultaneously.
- Current selection indicated by "@" symbol for clear navigation.
- Input Controls:
- Navigation Keys: Left/right arrows for scrolling menus; up/down arrows for adjusting values at fast (10% per step) or slow (1%/0.01 per step) rates.
- Function Keys: ESC (exit/save changes), SAVE (store tunable values), ID (display software version), numeric keys (0–9) for direct value entry.
- Special Functions: Support for negative values (- key), decimal points (• key), and backspace (BKSP) for editing.
- Communication:
- Connects to Peak 150 via RS-485/422 port (9-pin connector inside sealed service port).
- Compatible with Modbus configurations (port parameters set via CONFIGURE mode).
- Operation Modes:
- CONFIGURE Mode: Disables control outputs; sets speed ranges, relay options, and communication parameters (turbine must be shutdown).
- SERVICE Mode: Adjusts dynamics, monitors alarms/trips, and calibrates readouts while the turbine is running.
- Safety Features:
- Requires separate overspeed protection for turbine systems (not integrated with programmer).
- Hermetically sealed connector to maintain hazardous environment compliance (NEMA 4X for Peak 150, programmer designed for 配套使用).
- Physical Interface:
- Lightweight design for portability during on-site programming.
- Ergonomic keypad layout for ease of use in industrial settings.
Woodward|9907-1199|Hand-Held Programmer
المنتج الحالي
حاضِر
بائع:
Woodward
Woodward|9907-1199|Hand-Held Programmer
سعر عادي
$200.00
سعر البيع
$200.00
سعر عادي
$300.00
خيارات
الأوصاف
Woodward 9907-1199 Hand-Held Programmer
Description
The Woodward 9907-1199 is a dedicated hand-held programmer designed for configuring and monitoring the Peak 150 control module, enabling menu-driven programming via a service port for industrial engine/turbine speed and load control systems.
Features
- Menu-Driven Interface: Simplifies programming with CONFIGURE and SERVICE modes for parameter adjustment.
- Dual-Mode Operation: Configures control settings (requires turbine shutdown in CONFIGURE mode) and adjusts parameters on-the-fly (SERVICE mode during operation).
- Secure Connectivity: Connects to the Peak 150’s 9-pin RS-485/422 service port; removable cover seals port when not in use to prevent tampering.
- Safety Compliance: Includes explosion hazard warnings for use in hazardous environments (never connect/disconnect in explosive atmospheres).
- Multi-Function Keypad: Offers intuitive navigation with arrow keys, numeric input, and dedicated function keys (e.g., SAVE, ESC, ID).
Technical Specifications
- Display:
- 4-line digital display showing two independent parameters simultaneously.
- Current selection indicated by "@" symbol for clear navigation.
- Input Controls:
- Navigation Keys: Left/right arrows for scrolling menus; up/down arrows for adjusting values at fast (10% per step) or slow (1%/0.01 per step) rates.
- Function Keys: ESC (exit/save changes), SAVE (store tunable values), ID (display software version), numeric keys (0–9) for direct value entry.
- Special Functions: Support for negative values (- key), decimal points (• key), and backspace (BKSP) for editing.
- Communication:
- Connects to Peak 150 via RS-485/422 port (9-pin connector inside sealed service port).
- Compatible with Modbus configurations (port parameters set via CONFIGURE mode).
- Operation Modes:
- CONFIGURE Mode: Disables control outputs; sets speed ranges, relay options, and communication parameters (turbine must be shutdown).
- SERVICE Mode: Adjusts dynamics, monitors alarms/trips, and calibrates readouts while the turbine is running.
- Safety Features:
- Requires separate overspeed protection for turbine systems (not integrated with programmer).
- Hermetically sealed connector to maintain hazardous environment compliance (NEMA 4X for Peak 150, programmer designed for 配套使用).
- Physical Interface:
- Lightweight design for portability during on-site programming.
- Ergonomic keypad layout for ease of use in industrial settings.
