GE Fanuc|IC693MDL742D|16-Point 12/24VDC Positive Logic Output Module
GE Fanuc IC693MDL742D 16-Point 12/24VDC Positive Logic Output Module
Description
The GE Fanuc IC693MDL742D is a 16-point 12/24VDC positive logic output module with electronic short circuit protection for Series 90-30 PLC systems.
Features
Provides 16 sourcing output points in two isolated 8-point banks.
Positive logic output drives current to load from common or positive bus.
Electronic Short Circuit Protection (ESCP) on each bank.
Red LED indicator labeled “F” activates on short circuit trip.
Green LED per output for ON/OFF status monitoring.
Hinged door with wiring diagram inside and ID label outside.
Blue strip identifies low-voltage module.
No fuses required.
Hot-swappable installation in any I/O slot.
Compatible with 5-slot and 10-slot baseplates.
Technical Specifications
- Rated Voltage: 12/24 VDC
- Output Voltage Range: 12 to 24 VDC (+20%, -15%)
- Number of Outputs: 16 (8 per bank)
- Output Current: 1.0 A per point
- Load Types Supported: Solenoids, indicators, motor starters
- Wiring Requirement: Load connected between negative power bus and module output
- Power Source: External user-supplied power for field devices
- Protection Type: Two ESCP circuits (one per 8-point bank)
- Trip Response: Output bank disables and red LED turns on
- Reset Method: Remove 12/24 VDC user supply
-
Operating Environment:
- Temperature: 0°C to 60°C
- Humidity: 5% to 95% non-condensing
GE Fanuc|IC693MDL742D|16-Point 12/24VDC Positive Logic Output Module
GE Fanuc|IC693MDL742D|16-Point 12/24VDC Positive Logic Output Module
GE Fanuc IC693MDL742D 16-Point 12/24VDC Positive Logic Output Module
Description
The GE Fanuc IC693MDL742D is a 16-point 12/24VDC positive logic output module with electronic short circuit protection for Series 90-30 PLC systems.
Features
Provides 16 sourcing output points in two isolated 8-point banks.
Positive logic output drives current to load from common or positive bus.
Electronic Short Circuit Protection (ESCP) on each bank.
Red LED indicator labeled “F” activates on short circuit trip.
Green LED per output for ON/OFF status monitoring.
Hinged door with wiring diagram inside and ID label outside.
Blue strip identifies low-voltage module.
No fuses required.
Hot-swappable installation in any I/O slot.
Compatible with 5-slot and 10-slot baseplates.
Technical Specifications
- Rated Voltage: 12/24 VDC
- Output Voltage Range: 12 to 24 VDC (+20%, -15%)
- Number of Outputs: 16 (8 per bank)
- Output Current: 1.0 A per point
- Load Types Supported: Solenoids, indicators, motor starters
- Wiring Requirement: Load connected between negative power bus and module output
- Power Source: External user-supplied power for field devices
- Protection Type: Two ESCP circuits (one per 8-point bank)
- Trip Response: Output bank disables and red LED turns on
- Reset Method: Remove 12/24 VDC user supply
-
Operating Environment:
- Temperature: 0°C to 60°C
- Humidity: 5% to 95% non-condensing
