Bently Nevada|9200-06-01-11-04|Two-Wire Moving-Coil Velocity Transducer

Bently Nevada 9200-06-01-11-04 Seismoprobe Velocity Transducer

Description
The Bently Nevada 9200-06-01-11-04 is a two-wire moving-coil velocity transducer designed for vibration monitoring with an isolated circular M10X1 stud mounting base and CSA approval.

Features

• Designed for continuous or periodic vibration measurement
• Moving-coil technology requiring no external power
• Suitable for harsh environments with resistance to corrosion
• Provides voltage output proportional to vibration velocity
• Easy installation and integration

Technical Specifications

• Electrical

  • Sensitivity: 20 mV/mm/s (500 mV/in/s) ±5%
  • Calibration load: 10 kΩ
  • Sensitivity temperature coefficient: 0.2%/°C
  • Frequency response: 4.5 to 1000 Hz (+0, -3dB typical)
  • Dynamic operating range: 2.54 mm peak-to-peak maximum displacement
  • Coil resistance: 1.25 kΩ ±5%
  • Locked coil inductance: 125 mH typical
  • Amplitude linearity: ±5% from 0.01 to 5.0 in/s at 100Hz
  • Shock resistance: Withstands up to 50 g peak acceleration
  • Output polarity: Pin A positive relative to Pin B when case velocity towards connector

• Environmental Limits

  • Operating temperature: -29°C to +121°C (-20°F to +250°F)
  • Relative humidity: Up to 95%, non-condensing; 100% non-submerged with integral cable option

• Physical

  • Height: Approximately 102 mm (4 in) depending on connector option
  • Diameter: 41 mm (1.6 in)
  • Weight: Approximately 300 grams (10.5 ounces)
  • Mounting torque for M10X1 stud: 5.6 N•m (50 in•lb)

• Compliance and Certifications

  • FCC compliant
  • EMC Directive 2014/30/EU
  • RoHS Directive 2011/65/EU
  • Certified for hazardous areas including Class I, Division 1, Groups A-D; Class II, Groups E-G; Class III