GE Fanuc|IC697PWR713|AC/DC Power Supply Module
GE Fanuc IC697PWR713 100W AC/DC Power Supply Module
Description
GE Fanuc IC697PWR713 is a 100-watt AC/DC power supply module for the Series 90-70, providing +5 VDC, +12 VDC, and -12 VDC outputs with electronic protection and dual-rack support.
Features
- Supports 120/240 VAC or 125 VDC input with power factor correction
- Slide-in rack mounting in leftmost slot of IC697 or VME racks
- Powers two racks from a single module with prewired interconnect cable
- Electronic overcurrent and overvoltage protection with auto-reset on overload
- Ride-through capability: 21 ms minimum holdup time during input power loss
Technical Specifications
-
Input Characteristics
- Nominal Voltage: 120/240 VAC or 125 VDC
- Input Range: 90–264 VAC (47–63 Hz) or 100–150 VDC
- Input Power: 135 W (typical), 160 W (maximum)
- Inrush Current: 3 A (typical)
- Power Factor: >0.93
-
Output Characteristics
- Total Output Power: 100 W
- +5 VDC: 4.90–5.25 V, up to 20 A
- +12 VDC: 11.64–12.6 V, up to 2 A
- -12 VDC: -12.6 to -11.64 V, up to 1 A
- Overvoltage Protection: Shuts down if +5 V exceeds 5.7–6.7 V
-
Protection & Reliability
- Overcurrent Protection: Voltage collapses under overload; auto-reset after load removal
- Fuse: 3AG 3 A, 250 V (opens only on internal faults)
- Holdup Time: ≥21 ms at full load
GE Fanuc|IC697PWR713|AC/DC Power Supply Module
GE Fanuc|IC697PWR713|AC/DC Power Supply Module
GE Fanuc IC697PWR713 100W AC/DC Power Supply Module
Description
GE Fanuc IC697PWR713 is a 100-watt AC/DC power supply module for the Series 90-70, providing +5 VDC, +12 VDC, and -12 VDC outputs with electronic protection and dual-rack support.
Features
- Supports 120/240 VAC or 125 VDC input with power factor correction
- Slide-in rack mounting in leftmost slot of IC697 or VME racks
- Powers two racks from a single module with prewired interconnect cable
- Electronic overcurrent and overvoltage protection with auto-reset on overload
- Ride-through capability: 21 ms minimum holdup time during input power loss
Technical Specifications
-
Input Characteristics
- Nominal Voltage: 120/240 VAC or 125 VDC
- Input Range: 90–264 VAC (47–63 Hz) or 100–150 VDC
- Input Power: 135 W (typical), 160 W (maximum)
- Inrush Current: 3 A (typical)
- Power Factor: >0.93
-
Output Characteristics
- Total Output Power: 100 W
- +5 VDC: 4.90–5.25 V, up to 20 A
- +12 VDC: 11.64–12.6 V, up to 2 A
- -12 VDC: -12.6 to -11.64 V, up to 1 A
- Overvoltage Protection: Shuts down if +5 V exceeds 5.7–6.7 V
-
Protection & Reliability
- Overcurrent Protection: Voltage collapses under overload; auto-reset after load removal
- Fuse: 3AG 3 A, 250 V (opens only on internal faults)
- Holdup Time: ≥21 ms at full load
