GE Fanuc|IC697MDL654|32-Point 48 VDC Input Module
GE Fanuc IC697MDL654 32-Point 48 VDC Input Module
Description
GE Fanuc IC697MDL654 is a 32-point 48 VDC positive/negative logic input module for GE Fanuc Series 90-70 PLCs, supporting isolated input groups and configurable filter timing.
Features
Supports two- and three-wire switches and proximity sensors.
Four isolated input groups with independent power supplies.
Configurable filter delay (1 ms or 10 ms) with CPU interrupt capability on compatible CPUs.
Removable terminal block with hinged cover for labeling and protection.
Mechanical key prevents incorrect module installation.
Technical Specifications
Rated Voltage: 48 VDC
Input Voltage Range: –3 to +56 VDC
Number of Inputs: 32 (4 groups of 8)
Input Current: 4.7 mA (typical at rated voltage)
Input Impedance: 10.3 kΩ (typical)
On-State Voltage Range: 33 V to 56 V
Off-State Voltage Range: 0 V to 10 V
Off-State Input Current: 0 to 2 mA (minimum 2 mA at 5 V)
Isolation Voltage:
• 1500 V RMS – any input to backplane
• 500 V RMS – between input groups
Filter Delay Time: Configurable to 1 ms or 10 ms
Backplane Power Requirement: 0.30 A at 5 VDC
GE Fanuc|IC697MDL654|32-Point 48 VDC Input Module
GE Fanuc|IC697MDL654|32-Point 48 VDC Input Module
GE Fanuc IC697MDL654 32-Point 48 VDC Input Module
Description
GE Fanuc IC697MDL654 is a 32-point 48 VDC positive/negative logic input module for GE Fanuc Series 90-70 PLCs, supporting isolated input groups and configurable filter timing.
Features
Supports two- and three-wire switches and proximity sensors.
Four isolated input groups with independent power supplies.
Configurable filter delay (1 ms or 10 ms) with CPU interrupt capability on compatible CPUs.
Removable terminal block with hinged cover for labeling and protection.
Mechanical key prevents incorrect module installation.
Technical Specifications
Rated Voltage: 48 VDC
Input Voltage Range: –3 to +56 VDC
Number of Inputs: 32 (4 groups of 8)
Input Current: 4.7 mA (typical at rated voltage)
Input Impedance: 10.3 kΩ (typical)
On-State Voltage Range: 33 V to 56 V
Off-State Voltage Range: 0 V to 10 V
Off-State Input Current: 0 to 2 mA (minimum 2 mA at 5 V)
Isolation Voltage:
• 1500 V RMS – any input to backplane
• 500 V RMS – between input groups
Filter Delay Time: Configurable to 1 ms or 10 ms
Backplane Power Requirement: 0.30 A at 5 VDC
