Yokogawa|NC4*B|Nest Common Card
YOKOGAWA NC4*B Nest Common Card
Description
The YOKOGAWA NC4*B is a Nest Common Card used as a backplane interface module in YOKOGAWA’s CENTUM CS and CS3000 distributed control systems, enabling communication and power distribution between I/O modules and the system controller.
Features
- Provides mechanical and electrical integration for I/O modules
- Supports hot-swappable module installation
- Ensures stable signal and power routing within the I/O nest
Technical Specifications
- Compatible with YOKOGAWA CENTUM CS/CS3000 I/O nests
- Operating voltage: 24 V DC (supplied via system power rail)
- Maximum current rating per power pin: 2 A
- Connector type: high-density DIN 41612-compatible edge connector
- Number of signal channels supported: up to 64 per nest (depending on installed I/O modules)
- Isolation: reinforced insulation between field and logic sides per IEC 61010
- Operating temperature: 0 to 55°C
- Storage temperature: –25 to 70°C
- Relative humidity: 10% to 90%, non-condensing
- Module dimensions: approximately 280 mm width × 150 mm height × 30 mm depth
- Mounting: fixed within standard YOKOGAWA I/O cabinet chassis
- MTBF: greater than 100,000 hours under typical operating conditions
Yokogawa|NC4*B|Nest Common Card
Yokogawa|NC4*B|Nest Common Card
YOKOGAWA NC4*B Nest Common Card
Description
The YOKOGAWA NC4*B is a Nest Common Card used as a backplane interface module in YOKOGAWA’s CENTUM CS and CS3000 distributed control systems, enabling communication and power distribution between I/O modules and the system controller.
Features
- Provides mechanical and electrical integration for I/O modules
- Supports hot-swappable module installation
- Ensures stable signal and power routing within the I/O nest
Technical Specifications
- Compatible with YOKOGAWA CENTUM CS/CS3000 I/O nests
- Operating voltage: 24 V DC (supplied via system power rail)
- Maximum current rating per power pin: 2 A
- Connector type: high-density DIN 41612-compatible edge connector
- Number of signal channels supported: up to 64 per nest (depending on installed I/O modules)
- Isolation: reinforced insulation between field and logic sides per IEC 61010
- Operating temperature: 0 to 55°C
- Storage temperature: –25 to 70°C
- Relative humidity: 10% to 90%, non-condensing
- Module dimensions: approximately 280 mm width × 150 mm height × 30 mm depth
- Mounting: fixed within standard YOKOGAWA I/O cabinet chassis
- MTBF: greater than 100,000 hours under typical operating conditions
