GE Fanuc|IC693ALG392B|8-Channel Analog Output Module
GE Fanuc IC693ALG392 8-Channel Analog Output Module
Description
GE Fanuc IC693ALG392 is an 8-channel analog voltage/current output module for PACSystems RX3i and Series 90-30 PLCs, supporting configurable unipolar, bipolar, and current loop outputs.
Features
- 8 single-ended analog output channels
- Configurable per channel: 0 to +10 V, -10 to +10 V, 0 to 20 mA, or 4 to 20 mA
- Open wire fault detection in current output mode
- Configurable safe state on power loss: hold last value or reset to zero
- Operates with external +24 VDC supply
- Requires metal enclosure for RF immunity
- Hot-swappable; installs in any I/O slot of RX3i or Series 90-30
Technical Specifications
- Number of Channels: 8
-
Output Ranges:
- Voltage: 0 to +10 V (unipolar), -10 to +10 V (bipolar)
- Current: 0 to 20 mA, 4 to 20 mA
- Resolution: 15 to 16 bits (range-dependent)
- Update Rate: 8 ms (all channels)
- Max Output Load: 5 mA (current), 1 kΩ min (voltage)
-
Accuracy:
- Normal conditions: ±0.1% FS typical
- Under RF interference: ±1% FS (current), ±3% FS (voltage)
- Output Adjustment: Factory calibrated to 0.625 µA per count
-
Power Requirements:
- +5 VDC from backplane: 110 mA
- External +24 VDC supply: 315 mA (connected via terminal block)
GE Fanuc|IC693ALG392B|8-Channel Analog Output Module
GE Fanuc|IC693ALG392B|8-Channel Analog Output Module
GE Fanuc IC693ALG392 8-Channel Analog Output Module
Description
GE Fanuc IC693ALG392 is an 8-channel analog voltage/current output module for PACSystems RX3i and Series 90-30 PLCs, supporting configurable unipolar, bipolar, and current loop outputs.
Features
- 8 single-ended analog output channels
- Configurable per channel: 0 to +10 V, -10 to +10 V, 0 to 20 mA, or 4 to 20 mA
- Open wire fault detection in current output mode
- Configurable safe state on power loss: hold last value or reset to zero
- Operates with external +24 VDC supply
- Requires metal enclosure for RF immunity
- Hot-swappable; installs in any I/O slot of RX3i or Series 90-30
Technical Specifications
- Number of Channels: 8
-
Output Ranges:
- Voltage: 0 to +10 V (unipolar), -10 to +10 V (bipolar)
- Current: 0 to 20 mA, 4 to 20 mA
- Resolution: 15 to 16 bits (range-dependent)
- Update Rate: 8 ms (all channels)
- Max Output Load: 5 mA (current), 1 kΩ min (voltage)
-
Accuracy:
- Normal conditions: ±0.1% FS typical
- Under RF interference: ±1% FS (current), ±3% FS (voltage)
- Output Adjustment: Factory calibrated to 0.625 µA per count
-
Power Requirements:
- +5 VDC from backplane: 110 mA
- External +24 VDC supply: 315 mA (connected via terminal block)
