{"product_id":"yokogawa-sce401-11-s1-esb-bus-coupler-module","title":"Yokogawa SCE401-11 S1 ESB Bus Coupler Module","description":"\u003cp\u003eThe \u003cstrong\u003eYokogawa SCE401-11 S1\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eSCE401\u003c\/strong\u003e ESB Bus Coupler Module, operates as a dedicated hardware component for high-speed deterministic bus signal coupling within CENTUM control station nodes. It serves as the primary ESB bus master interface, coordinating real-time communication and data exchange across up to 9 connected node interface units without incurring packet transmission jitter or protocol parsing overhead.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eSCE401-11 S1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eYokogawa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eJapan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.24 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e130 mm x 30 mm x 125 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 to 50 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e5.0 VDC @ 0.5 A (2.5 W nominal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModule Type\u003c\/td\u003e\n\u003ctd\u003eESB Bus Coupler Module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaster Interface Capacity\u003c\/td\u003e\n\u003ctd\u003eUp to 9 connectable node units\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransmission Speed\u003c\/td\u003e\n\u003ctd\u003e128 Mbps (I\/O module data transmission)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransmission Distance\u003c\/td\u003e\n\u003ctd\u003e10 m maximum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal Isolation\u003c\/td\u003e\n\u003ctd\u003eChannel-to-channel galvanic isolation via pulse transformers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eCold Junction Compensation and Channel-to-Channel Isolation\u003c\/h3\u003e\n\u003cp\u003eFunctioning within Yokogawa process architectures where signal integrity relies on strict channel-to-channel isolation and precise cold junction compensation (CJC), the SCE401-11 S1 isolates internal logic power from field-side noise propagation. When interfacing with remote thermal or analog input channels across 4-20 mA HART loop protocol networks, the high-speed 128 Mbps ESB payload maintains microsecond-level synchronization. This deterministic data pathway allows remote node digitizers to transmit compensated thermocouple voltage updates across the backplane without phase lag, ensuring accurate Process Variable (PV) processing under heavy network loads.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Can the SCE401-11 S1 be replaced online while the control node remains energized?\u003c\/p\u003e\n\u003cp\u003eA: Online removal and insertion (hot-swapping) is fully supported in redundant ESB bus topologies. When replacing an active SCE401-11 S1 module, the redundant partner coupler instantly assumes bus master responsibilities without disrupting active I\/O scanning cycles.\u003c\/p\u003e\n\u003cp\u003eQ: What are the strict cabling limits for connecting the SCE401-11 S1 to remote expansion nodes?\u003c\/p\u003e\n\u003cp\u003eA: Interconnecting cables must be dedicated Yokogawa ESB bus cables with a maximum total segment length of 10 m. Exceeding this 10 m distance limit causes line impedance mismatches and degradation of the 128 Mbps differential signal waveform.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eVerify that the target rack slot power is disabled or that the partner redundant coupler is actively driving bus traffic before installing the SCE401-11 S1.\u003c\/li\u003e\n\u003cli\u003eAlign the module circuit board edges with the top and bottom guide rails of the dedicated controller subrack slot.\u003c\/li\u003e\n\u003cli\u003eSlide the module inward until the rear multi-pin backplane connector seats completely, then torque the upper and lower retaining screws to 0.5 Nm.\u003c\/li\u003e\n\u003cli\u003eSecure the dedicated ESB bus communication cable to the front connector interface, ensuring the side locking latches click firmly into position.\u003c\/li\u003e\n\u003cli\u003eGround the cable shield wire directly to the cabinet functional earth (FE) bus bar using a short, low-impedance conductor to prevent high-frequency EMI interference.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Yokogawa","offers":[{"title":"Default Title","offer_id":52702865654040,"sku":"SCE401-11 S1","price":200.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0892\/3483\/3688\/files\/EC401-10S3_Cocoai_f769e070-8de3-4101-bc38-f1a97e66a821.jpg?v=1789721925","url":"https:\/\/www.innoplcsync.com\/products\/yokogawa-sce401-11-s1-esb-bus-coupler-module","provider":"InnoPLC Sync Co., Ltd.","version":"1.0","type":"link"}