{"product_id":"honeywell-mc-tsim12-serial-interface-pcb-module","title":"Honeywell MC-TSIM12 Serial Interface PCB Module","description":"\u003cdiv class=\"qk-md-paragraph qk-md-has-multi-modal\"\u003e\n\u003cp\u003eThe \u003cstrong\u003eHoneywell MC-TSIM12\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eMC-TSIM12\u003c\/strong\u003e Serial Interface PCB Module, operates as a dedicated hardware component for high-speed serial device communication and protocol execution within Honeywell TDC3000 and Experion process automation networks. The board functions as a serial gateway, interfacing field-level intelligent instruments, PLCs, and third-party subsystems with the controller backplane. Dedicated onboard communication logic handles serial protocol framing, signal buffering, and baud rate negotiation while maintaining galvanc isolation between the field-side serial lines and internal system electronics.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eMC-TSIM12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eHoneywell\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1.00 kg (2.20 lbs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eStandard rack-mount PCB card\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 to 60 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e24 VDC nominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eSerial Interface PCB Modules\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunctionality\u003c\/td\u003e\n\u003ctd\u003eSerial communication gateway \/ PCB module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSystem Integration\u003c\/td\u003e\n\u003ctd\u003eHoneywell TDC3000 \/ Experion DCS backplane\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInterface Type\u003c\/td\u003e\n\u003ctd\u003eHigh-speed serial bus interface\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003e4-20 mA HART Loop Protocol \u0026amp; Channel Isolation\u003c\/h3\u003e\n\u003cp\u003eThe MC-TSIM12 module incorporates multi-channel galvanic isolation to prevent ground loop currents and transient spikes from penetrating the host system backplane. Designed for robust operation in distributed DCS environments, the card isolates serial communication buses from field-side electrical interference. Integrated differential transceivers absorb common-mode voltage offsets often encountered across long field wiring runs, ensuring continuous signal integrity and predictable communication latencies between connected field subsystems and the host controller.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: How does the channel isolation on the serial lines protect host system components?\u003c\/p\u003e\n\u003cp\u003eA: Galvanic isolation barriers decouple the field-side serial interface circuitry from the internal backplane logic, preventing high-voltage transients or ground potential differences from causing hardware failure on the host rack.\u003c\/p\u003e\n\u003cp\u003eQ: Is hot-swapping supported for the MC-TSIM12 PCB module during operation?\u003c\/p\u003e\n\u003cp\u003eA: Module removal or replacement must comply with Honeywell rack insertion guidelines. It is recommended to deactivate active serial communication channels prior to card extraction to prevent frame corruption or unexpected bus errors.\u003c\/p\u003e\n\u003cp\u003eQ: What cable considerations are critical for establishing reliable serial communication?\u003c\/p\u003e\n\u003cp\u003eA: Low-capacitance, individually shielded twisted-pair cables must be utilized. The drain wire must be bonded to the cabinet technical earth bar at a single termination point to shield data paths from high-frequency electromagnetic noise.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eInspect the backplane connector edge of the MC-TSIM12 PCB module for clean contact surfaces prior to rack insertion.\u003c\/li\u003e\n\u003cli\u003eAlign the module with the card guides of the target chassis slot and slide it firmly until the rear connector latches seat into the motherboard receptacle.\u003c\/li\u003e\n\u003cli\u003eSecure the front panel card retention fasteners to maintain frame ground contact and mechanical stability under vibration.\u003c\/li\u003e\n\u003cli\u003eWire field serial communication lines using shielded twisted-pair cables, bonding cable shields to the single-point technical earth bar within the enclosure.\u003c\/li\u003e\n\u003cli\u003eVerify power supply rail tolerances (24 VDC) and grounding continuity before initializing serial communication protocols via the control system software.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/div\u003e","brand":"Honeywell","offers":[{"title":"Default Title","offer_id":52739546022168,"sku":"MC-TSIM12","price":75.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0892\/3483\/3688\/files\/MC-TSIM12_Cocoai_8bf3ed70-e548-45fc-b453-f0c6b8e27fbe.jpg?v=1789974464","url":"https:\/\/www.innoplcsync.com\/products\/honeywell-mc-tsim12-serial-interface-pcb-module","provider":"InnoPLC Sync Co., Ltd.","version":"1.0","type":"link"}