{"product_id":"honeywell-8u-tpox01-51307022-175-wireless-module-backplane","title":"Honeywell 8U-TPOX01 51307022-175 Wireless Module Backplane","description":"\u003cdiv class=\"qk-md-paragraph qk-md-has-multi-modal\"\u003e\n\u003cp\u003eThe \u003cstrong\u003eHoneywell 8U-TPOX01 51307022-175\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003e8U-TPOX01\u003c\/strong\u003e Wireless Module Backplane, operates as a dedicated hardware component for physical mounting and backplane bus signal interfacing within Experion PKS Series 8 I\/O platforms.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e8U-TPOX01 51307022-175\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eHoneywell\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.32 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e22.6 cm x 22.6 cm x 5.08 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-40 to 60 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eSystem backplane powered (Series 8 carrier dependent)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eForm Factor\u003c\/td\u003e\n\u003ctd\u003eSeries 8 I\/O Module Mounting Base\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInterface Type\u003c\/td\u003e\n\u003ctd\u003eExperion Series 8 Backplane Bus\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCommunication\u003c\/td\u003e\n\u003ctd\u003eHigh-Speed Wireless Interface Link\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eChannel Isolation and Process Loop Signal Integrity\u003c\/h3\u003e\n\u003cp\u003eThe 8U-TPOX01 backplane incorporates dedicated channel-to-channel isolation architecture designed to isolate process loop transients and prevent common-mode noise propagation across the Series 8 carrier assembly. It maintains continuous signal processing fidelity for high-speed wireless transmitter links, utilizing onboard cold junction compensation (CJC) reference routing and filtered power lines to stabilize differential analog and digital signal feeds within noisy process environments.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Does the 8U-TPOX01 support live insertion and removal (hot-swapping) during continuous controller operation?\u003c\/p\u003e\n\u003cp\u003eA: Yes. The Series 8 backplane architecture features staggered pin engagement on the power and communication buses, enabling module insertion and removal under live backplane power without interrupting adjacent I\/O channel processing.\u003c\/p\u003e\n\u003cp\u003eQ: How is chassis grounding established to maintain signal isolation standards?\u003c\/p\u003e\n\u003cp\u003eA: Heavy-duty grounding clips integrated on the rear mounting assembly bonded directly to the carrier DIN rail establish a low-impedance earth ground path, diverting high-frequency RF interference away from internal bus logic.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Orientation\u003c\/strong\u003e: Secure the backplane vertically on standard 35 mm DIN rails inside an IP54 or NEMA 12 rated enclosure to ensure adequate thermal convection across the passive cooling channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrounding Protocol\u003c\/strong\u003e: Verify that the carrier grounding strap connects directly to the cabinet main earth bar (PE) via a minimum 4 mm sq (10 AWG) copper conductor. Grounding resistance must measure less than 1.0 Ohm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Bus Separation\u003c\/strong\u003e: Route high-voltage AC lines and high-current relay wires in separate wire ducts, maintaining a minimum physical distance of 50 mm (2 in) from the backplane signal and antenna leads to prevent inductive coupling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Integrity\u003c\/strong\u003e: Inspect the backplane multi-pin edge connectors for debris prior to seating the wireless interface module. Tighten retaining screws to hand-tight torque (0.6 Nm) to maintain electrical contact under physical vibration.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/div\u003e","brand":"Honeywell","offers":[{"title":"Default Title","offer_id":52751320056088,"sku":"8U-TPOX01 51307022-175","price":75.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0892\/3483\/3688\/files\/8U-TPOX0151307022-175_3b6babf8-1e28-49fa-afaf-3e3e7f12a3f8.png?v=1790149808","url":"https:\/\/www.innoplcsync.com\/products\/honeywell-8u-tpox01-51307022-175-wireless-module-backplane","provider":"InnoPLC Sync Co., Ltd.","version":"1.0","type":"link"}