{"product_id":"ge-vmipci-5565-110000-reflective-memory-module","title":"GE VMIPCI-5565-110000 Reflective Memory Module","description":"\u003cp\u003eThe \u003cstrong\u003eVMIPCI-5565-110000\u003c\/strong\u003e is a high-performance PCI bus reflective memory interface module developed by GE Fanuc VMIC. Designed for real-time industrial simulation and distributed control systems, it provides 128 MB of onboard SDRAM shared across an optical ring network. This hardware enables instantaneous, deterministic data synchronization among up to 256 connected computer nodes without burdening the host CPU.\u003c\/p\u003e\n\u003ch3\u003eNetwork Architecture and High-Speed Data Sharing\u003c\/h3\u003e\n\u003cp\u003eThe module operates on a high-speed fiber-optic network ring, broadcasting local memory writes directly to all other nodes on the network. Network transfer rates scale dynamically from 47.1 MB\/s for small 4-byte packets up to 174 MB\/s for 64-byte burst packets. This architecture guarantees low-latency deterministic communication critical for multi-controller synchronization and real-time data acquisition.\u003c\/p\u003e\n\u003ch3\u003eBus Compatibility and Power Specifications\u003c\/h3\u003e\n\u003cp\u003eEquipped with a 64-bit PCI bus interface, the card supports high-speed data exchanges with host processors at up to 264 MB\/s on 33 MHz buses or 528 MB\/s on 66 MHz buses. It requires a regulated +3.3 VDC power supply from the PCI slot with a maximum current consumption of 1.5 A. The optical interface utilizes small form factor (SFF) LC connectors compatible with multimode fiber cabling.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eVMIPCI-5565-110000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eGE Fanuc (VMIC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eReflective Memory Modules\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMemory Capacity\u003c\/td\u003e\n\u003ctd\u003e128 MB SDRAM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePCI Bus Interface\u003c\/td\u003e\n\u003ctd\u003e33 MHz \/ 64-bit (264 MB\/s) or 66 MHz \/ 64-bit (528 MB\/s)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNetwork Transfer Rate\u003c\/td\u003e\n\u003ctd\u003e47.1 MB\/s (4-byte packets) to 174 MB\/s (64-byte packets)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNode Capacity\u003c\/td\u003e\n\u003ctd\u003eUp to 256 nodes on optical ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePacket Size\u003c\/td\u003e\n\u003ctd\u003eDynamic, 4 to 64 bytes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOptical Interface\u003c\/td\u003e\n\u003ctd\u003eMultimode fiber (850 nm SFF, LC connector)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Requirements\u003c\/td\u003e\n\u003ctd\u003e+3.3 VDC (±5%), 1.5 A max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e0 to 65 deg C (with forced air cooling)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage Temperature\u003c\/td\u003e\n\u003ctd\u003e-40 to 85 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRelative Humidity\u003c\/td\u003e\n\u003ctd\u003e20% to 80% (non-condensing)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eInstallation and Configuration Guidelines\u003c\/h3\u003e\n\u003cp\u003eEnsure the host industrial PC or VME\/PCI chassis is completely powered off before inserting the card into an available 33 MHz or 64-bit PCI slot. Connect the multimode LC fiber-optic cables securely to the transceiver ports to establish the optical ring. Verify that network node identification switches or software settings are correctly configured prior to system startup.\u003c\/p\u003e\n\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\n\u003cp\u003eQ: What is the primary function of the GE VMIPCI-5565-110000 module?A: It provides high-speed reflective memory sharing over an optical fiber ring, allowing multiple computers or controllers to synchronize data deterministically in real time.\u003c\/p\u003e\n\u003cp\u003eQ: How many nodes can be connected within a single reflective memory network ring?A: The architecture supports up to 256 independent nodes communicating over the optical network ring.\u003c\/p\u003e\n\u003cp\u003eQ: What type of fiber-optic connector is used by this specific multimode variant?A: It utilizes small form factor (SFF) LC connectors designed for multimode fiber-optic cables.\u003c\/p\u003e","brand":"GE Fanuc","offers":[{"title":"Default Title","offer_id":53116300591384,"sku":"VMIPCI-5565-110000","price":160.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0892\/3483\/3688\/files\/VMIPCI-5565-110000.png?v=1793587096","url":"https:\/\/www.innoplcsync.com\/products\/ge-vmipci-5565-110000-reflective-memory-module","provider":"InnoPLC Sync Co., Ltd.","version":"1.0","type":"link"}