{"product_id":"allen-bradley-1769-rtbn10-compactlogix-removable-terminal-block","title":"Allen-Bradley 1769-RTBN10 CompactLogix Removable Terminal Block","description":"\u003cp\u003eThe \u003cstrong\u003eAllen-Bradley 1769-RTBN10\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003e1769-RTBN10\u003c\/strong\u003e Removable Terminal Block, operates as a dedicated hardware component for field wiring termination and signal interface connection within CompactLogix control platforms.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e1769-RTBN10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAllen-Bradley\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.15 lbs (0.07 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eStandard CompactLogix 1769 Terminal Form Factor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 to 60 deg C (32 to 140 deg F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eN\/A (Passive Termination Component)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTerminal Count\u003c\/td\u003e\n\u003ctd\u003e10 Pins\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Type\u003c\/td\u003e\n\u003ctd\u003eFront-Panel Module Latch \/ Screw Terminal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatibility\u003c\/td\u003e\n\u003ctd\u003e1769 Compact I\/O Modules\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eBackplane Bus Communication Velocity and Firmware Compatibility\u003c\/h3\u003e\n\u003cp\u003eWhile the 1769-RTBN10 is a passive mechanical and electrical interface unit, its low-contact-resistance terminal connectors ensure uninterrupted signal transfer between field sensors and the active I\/O module electronics. Maintaining firm physical contact prevents signal attenuation or packet dropouts that could degrade backplane bus communication velocity across the CompactLogix rack structure.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Is the 1769-RTBN10 compatible with all 1769 Compact I\/O modules?\u003c\/p\u003e\n\u003cp\u003eA: The 1769-RTBN10 is a 10-pin removable terminal block designed specifically for 1769 Compact I\/O modules that utilize 10 point wiring configurations. Modules requiring 18-pin connections require the 1769-RTBN18 instead.\u003c\/p\u003e\n\u003cp\u003eQ: Can the 1769-RTBN10 terminal block be wired prior to module installation?\u003c\/p\u003e\n\u003cp\u003eA: Yes. The removable design allows pre-wiring and panel test routines to be completed independently before snapping the block onto the 1769 I\/O module chassis.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eVerify that incoming field power is fully de-energized before connecting or disconnecting the terminal block from the module.\u003c\/li\u003e\n\u003cli\u003eStrip field conductor insulation to the recommended length (typically 8 mm) to avoid exposed wiring or loose connections.\u003c\/li\u003e\n\u003cli\u003eTighten terminal screws using a standard flathead screwdriver to the recommended torque specification (0.68 Nm \/ 6 in-lbs).\u003c\/li\u003e\n\u003cli\u003eRoute field wiring neatly through the lower door channel to avoid mechanical pinching when closing the module cover.\u003c\/li\u003e\n\u003cli\u003eAlign the 1769-RTBN10 block with the front housing guide pins and press firmly until the retaining latches click into place.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Allen-Bradley","offers":[{"title":"Default Title","offer_id":52640817119512,"sku":"1769-RTBN10","price":270.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0892\/3483\/3688\/files\/1769-RTBN102_Cocoai.jpg?v=1789005596","url":"https:\/\/www.innoplcsync.com\/products\/allen-bradley-1769-rtbn10-compactlogix-removable-terminal-block","provider":"InnoPLC Sync Co., Ltd.","version":"1.0","type":"link"}