{"product_id":"allen-bradley-100s-f-safety-contactor","title":"Allen-Bradley 100S-F Safety Contactor","description":"\u003cp\u003eThe \u003cstrong\u003eAllen-Bradley 100S-F\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003e100S-F\u003c\/strong\u003e Safety Contactor, operates as a dedicated hardware component for hazardous power isolation and safety circuit interlocks within industrial safety systems. It directly de-energizes high-voltage power lines and drives safety-critical motor loads upon receiving trip commands from emergency stop loops, machine guarding interlocks, or two-hand control units.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e100S-F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAllen-Bradley\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUnited States\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1.6 ounces (0.045 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e2 x 2 x 1.5 inches (50.8 x 50.8 x 38.1 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003eStandard industrial range\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eCoil power dependent on control configuration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eContact Material\u003c\/td\u003e\n\u003ctd\u003eSilver alloy \/ High-conductivity materials\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAuxiliary Contacts\u003c\/td\u003e\n\u003ctd\u003eIntegrated mechanically linked for monitoring\/control\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProtection Rating\u003c\/td\u003e\n\u003ctd\u003eIP20 or higher\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Type\u003c\/td\u003e\n\u003ctd\u003eDIN rail or Panel mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eFirmware Flash Compatibility and Deterministic I\/O Integration\u003c\/h3\u003e\n\u003cp\u003eEngineered for integration with Allen-Bradley safety PLC racks and Guard I\/O architectures, the safety contactor operates reliably in high-density control enclosures without disturbing backplane bus communication velocity. Mechanically linked auxiliary contacts provide positive-guided feedback status directly to safe EtherNet\/IP deterministic networks. This enables controller-level diagnostic verification during firmware flash compatibility updates and safety-state validation checks without false feedback trips.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: How do the auxiliary contacts on the 100S-F support safety circuit monitoring?\u003c\/p\u003e\n\u003cp\u003eA: The contactor uses mechanically linked (positively guided) auxiliary contacts to ensure the normally closed (NC) monitoring contacts never close simultaneously with the normally open (NO) power contacts, allowing safety relays to reliably verify contact state.\u003c\/p\u003e\n\u003cp\u003eQ: Can the 100S-F be installed in standard industrial control enclosures?\u003c\/p\u003e\n\u003cp\u003eA: Yes, the unit supports standard 35 mm DIN rail or direct panel mounting and features an IP20 or higher enclosure rating for installation within standard control panels.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eDisconnect all primary line power and auxiliary control power before installing or servicing the safety contactor.\u003c\/li\u003e\n\u003cli\u003eSecurely mount the unit onto a standard 35 mm DIN rail or screw-mount it onto a panel backplate using proper torque limits.\u003c\/li\u003e\n\u003cli\u003eTerminate power cables and auxiliary feedback circuits using properly sized copper conductors and tighten terminal screws firmly.\u003c\/li\u003e\n\u003cli\u003eWire the mechanically linked auxiliary NC contacts directly into the feedback loop of the safety relay or Guard I\/O module to ensure active fault monitoring.\u003c\/li\u003e\n\u003cli\u003eVerify mechanical movement and electrical isolation prior to applying main power to connected motor loads.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Allen-Bradley","offers":[{"title":"Default Title","offer_id":52693163639064,"sku":"100S-F","price":270.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0892\/3483\/3688\/files\/100S-F2_Cocoai.jpg?v=1789612057","url":"https:\/\/www.innoplcsync.com\/products\/allen-bradley-100s-f-safety-contactor","provider":"InnoPLC Sync Co., Ltd.","version":"1.0","type":"link"}