Woodward|9905-864|Peak 150 Control Module
Woodward 9905-864 Peak 150 Control Module
Description
The Woodward 9905-864 is a microprocessor-based control module designed for speed and load regulation in industrial engines or turbines, featuring configurable inputs/outputs and hazardous environment compliance (NEMA 4X).
Features
- Multi-Function I/O: Supports power supply, analog/digital signals, speed sensors, and communication interfaces.
- Relay Configuration: Two dedicated and two user-configurable relays for trip/alarm functions.
- Speed Control: Integrates magnetic pickup inputs for precise speed sensing (up to 15,000 rpm).
- Communication Options: Optional Modbus RTU and a service port for handheld programmers.
- Hazardous Environment Ready: Sealed enclosure with NEMA 4X rating for rugged industrial use.
Technical Specifications
- Power Supply:
- Input: 90–150 Vdc or 88–132 Vac (47–63 Hz) for ac/dc version.
- Consumption: Max. 38 W.
- Operation: No power switch; active when powered (reset at +5 Vdc < 4.7 V).
- Discrete Inputs:
- Quantity: 8 isolated inputs (e.g., speed control, start/reset, remote enable).
- Power: Internal 24 Vdc or external 5–28 Vdc.
- Discrete Outputs:
- Relays: 4 hermetically sealed (2 dedicated, 2 configurable as trip/alarm).
- Ratings: 2 A resistive @ 28 Vdc / 0.3 A resistive @ 115 Vac (interposing relay for higher loads).
- Contacts: Normally open/closed via internal jumpers.
- Analog Input:
- Type: Remote speed setting (4–20 mA or 1–5 Vdc, jumper-selectable).
- Load: 250 Ω (for 4–20 mA).
- Analog Outputs:
- Speed Readout: 4–20 mA or 0–1 mA (jumper-selectable, max. load 600 Ω).
- User Configurable: Same as speed readout.
- Actuator Output: 0–200 mA (max. load 60 Ω) or 0–20 mA (max. load 450 Ω).
- Speed Sensor Inputs:
- Quantity: 2 magnetic pickup inputs.
- Signal Requirements: Min. 1 Vrms, 200 Hz–15 kHz (max. speed 15,000 rpm).
- Cabling: Shielded cable (grounded at control only).
- Communication:
- Modbus RTU: Optional (requires terminal installation, refer to Figure 4-5).
- Service Port: Dedicated for handheld programmer.
- Physical & Environmental:
- Enclosure: NEMA 4X (dust/water-resistant).
- Wiring: Passes through bottom ports; terminal block connections.
- Explosion Hazard: Do not open in hazardous atmospheres (sparking internal connections).
Woodward|9905-864|Peak 150 Control Module
محصول فعلی
جاری
فروشنده:
Woodward
Woodward|9905-864|Peak 150 Control Module
قیمت عادی
$200.00
قیمت فروش
$200.00
قیمت عادی
$300.00
گزینه ها
توضیحات
Woodward 9905-864 Peak 150 Control Module
Description
The Woodward 9905-864 is a microprocessor-based control module designed for speed and load regulation in industrial engines or turbines, featuring configurable inputs/outputs and hazardous environment compliance (NEMA 4X).
Features
- Multi-Function I/O: Supports power supply, analog/digital signals, speed sensors, and communication interfaces.
- Relay Configuration: Two dedicated and two user-configurable relays for trip/alarm functions.
- Speed Control: Integrates magnetic pickup inputs for precise speed sensing (up to 15,000 rpm).
- Communication Options: Optional Modbus RTU and a service port for handheld programmers.
- Hazardous Environment Ready: Sealed enclosure with NEMA 4X rating for rugged industrial use.
Technical Specifications
- Power Supply:
- Input: 90–150 Vdc or 88–132 Vac (47–63 Hz) for ac/dc version.
- Consumption: Max. 38 W.
- Operation: No power switch; active when powered (reset at +5 Vdc < 4.7 V).
- Discrete Inputs:
- Quantity: 8 isolated inputs (e.g., speed control, start/reset, remote enable).
- Power: Internal 24 Vdc or external 5–28 Vdc.
- Discrete Outputs:
- Relays: 4 hermetically sealed (2 dedicated, 2 configurable as trip/alarm).
- Ratings: 2 A resistive @ 28 Vdc / 0.3 A resistive @ 115 Vac (interposing relay for higher loads).
- Contacts: Normally open/closed via internal jumpers.
- Analog Input:
- Type: Remote speed setting (4–20 mA or 1–5 Vdc, jumper-selectable).
- Load: 250 Ω (for 4–20 mA).
- Analog Outputs:
- Speed Readout: 4–20 mA or 0–1 mA (jumper-selectable, max. load 600 Ω).
- User Configurable: Same as speed readout.
- Actuator Output: 0–200 mA (max. load 60 Ω) or 0–20 mA (max. load 450 Ω).
- Speed Sensor Inputs:
- Quantity: 2 magnetic pickup inputs.
- Signal Requirements: Min. 1 Vrms, 200 Hz–15 kHz (max. speed 15,000 rpm).
- Cabling: Shielded cable (grounded at control only).
- Communication:
- Modbus RTU: Optional (requires terminal installation, refer to Figure 4-5).
- Service Port: Dedicated for handheld programmer.
- Physical & Environmental:
- Enclosure: NEMA 4X (dust/water-resistant).
- Wiring: Passes through bottom ports; terminal block connections.
- Explosion Hazard: Do not open in hazardous atmospheres (sparking internal connections).
