GE Fanuc|IC693MDL754|32-Point 12/24VDC Sourcing Output Module
GE Fanuc IC693MDL754 32-Point 12/24VDC Sourcing Output Module
Description
GE Fanuc IC693MDL754 is a 32-point positive logic sourcing output module for Series 90-30 and RX3i PLC systems, operating at 12/24VDC with auto-recovery protection.
Features
32 outputs in two isolated groups of 16, each with independent commons.
Sourcing-type outputs supply current to loads with switch on positive side.
Auto-recovery protection against short circuit, overcurrent, and overtemperature.
DIP switches on rear for output circuit configuration.
32 yellow/green LEDs indicate output status and faults.
Sends 16-bit status data to CPU; fault reporting for ESCP, power loss, or config errors.
Technical Specifications
General
- Module Type: Sourcing Output
- Output Points: 32 (2 groups of 16)
- Compatible Systems: Series 90-30, RX3i PACSystems
- Board ID: 0x1A (diagnostics on), 0x0E (diagnostics off)
Electrical
- Rated Voltage: 12/24 VDC (nominal)
- Voltage Range: 10.2 to 30 VDC
- Output Current: 0.75 A per point
- Inrush Current: 3 A (10 ms, no ESCP trip)
- Overcurrent Trip: 5 A typical per point
- Leakage Current: ≤0.1 mA
- Voltage Drop: ≤0.3 VDC
Power
- Backplane Power: 300 mA max at 5 VDC
- External Supply Current: 72–132 mA per group
Performance
- On/Off Response Time: ≤0.5 ms
- Thermal Derating: Required above 42°C at 30 VDC
Environmental
- Operating Temperature: 0°C to 60°C (32°F to 140°F)
- Storage Temperature: –40°C to 85°C (–40°F to 185°F)
- Isolation: 1500 VAC for 1 minute (field to backplane, group to group)
GE Fanuc|IC693MDL754|32-Point 12/24VDC Sourcing Output Module
GE Fanuc|IC693MDL754|32-Point 12/24VDC Sourcing Output Module
GE Fanuc IC693MDL754 32-Point 12/24VDC Sourcing Output Module
Description
GE Fanuc IC693MDL754 is a 32-point positive logic sourcing output module for Series 90-30 and RX3i PLC systems, operating at 12/24VDC with auto-recovery protection.
Features
32 outputs in two isolated groups of 16, each with independent commons.
Sourcing-type outputs supply current to loads with switch on positive side.
Auto-recovery protection against short circuit, overcurrent, and overtemperature.
DIP switches on rear for output circuit configuration.
32 yellow/green LEDs indicate output status and faults.
Sends 16-bit status data to CPU; fault reporting for ESCP, power loss, or config errors.
Technical Specifications
General
- Module Type: Sourcing Output
- Output Points: 32 (2 groups of 16)
- Compatible Systems: Series 90-30, RX3i PACSystems
- Board ID: 0x1A (diagnostics on), 0x0E (diagnostics off)
Electrical
- Rated Voltage: 12/24 VDC (nominal)
- Voltage Range: 10.2 to 30 VDC
- Output Current: 0.75 A per point
- Inrush Current: 3 A (10 ms, no ESCP trip)
- Overcurrent Trip: 5 A typical per point
- Leakage Current: ≤0.1 mA
- Voltage Drop: ≤0.3 VDC
Power
- Backplane Power: 300 mA max at 5 VDC
- External Supply Current: 72–132 mA per group
Performance
- On/Off Response Time: ≤0.5 ms
- Thermal Derating: Required above 42°C at 30 VDC
Environmental
- Operating Temperature: 0°C to 60°C (32°F to 140°F)
- Storage Temperature: –40°C to 85°C (–40°F to 185°F)
- Isolation: 1500 VAC for 1 minute (field to backplane, group to group)
