GE Fanuc|IC693BEM341-CC|FIP Bus Controller Module
GE Fanuc IC693BEM341-CC FIP Bus Controller Module
Description
GE Fanuc IC693BEM341-CC is a Series 90-30 PLC FIP Bus Controller module operating at 2.5 MHz, supporting Mode 30 for advanced network communication, redundancy, and time-stamped data exchange.
Features
Supports Mode 11, 20, and 30 with enhanced diagnostics and device management.
Enables slave device monitoring for PLCs, drives, and control stations.
Provides Boolean value time stamping up to 1024 points.
Supports redundancy, synchronous MPS exchange, and external FIP network configuration.
Includes messaging services and improved fault handling.
Configurable using HHP Release 2.0+ and IC641CTLxxx software with FBCLOAD utility.
Technical Specifications
General
- Module Type: FIP Bus Controller
- Network Speed: 2.5 Mbps
- Slot Requirement: 1
- Compatible Backplane: Universal
- Required CPU Firmware: Version 8.10 or higher
Electrical
- Maximum Current: 1.2 A
- Typical Current: 800 mA
Communication
- Ports: 2 x 9-pin male D connectors, 1 x RS-485
Environmental
- Operating Temperature: 0°C to +55°C (32°F to 131°F)
- Storage Temperature: –25°C to +70°C (–13°F to 158°F)
- Humidity: 5% to 95%, non-condensing
- Vibration: 0.2 inch (5–10 Hz), 1 G (10–200 Hz)
- Shock: 5 G, 10 ms duration
GE Fanuc|IC693BEM341-CC|FIP Bus Controller Module
GE Fanuc|IC693BEM341-CC|FIP Bus Controller Module
GE Fanuc IC693BEM341-CC FIP Bus Controller Module
Description
GE Fanuc IC693BEM341-CC is a Series 90-30 PLC FIP Bus Controller module operating at 2.5 MHz, supporting Mode 30 for advanced network communication, redundancy, and time-stamped data exchange.
Features
Supports Mode 11, 20, and 30 with enhanced diagnostics and device management.
Enables slave device monitoring for PLCs, drives, and control stations.
Provides Boolean value time stamping up to 1024 points.
Supports redundancy, synchronous MPS exchange, and external FIP network configuration.
Includes messaging services and improved fault handling.
Configurable using HHP Release 2.0+ and IC641CTLxxx software with FBCLOAD utility.
Technical Specifications
General
- Module Type: FIP Bus Controller
- Network Speed: 2.5 Mbps
- Slot Requirement: 1
- Compatible Backplane: Universal
- Required CPU Firmware: Version 8.10 or higher
Electrical
- Maximum Current: 1.2 A
- Typical Current: 800 mA
Communication
- Ports: 2 x 9-pin male D connectors, 1 x RS-485
Environmental
- Operating Temperature: 0°C to +55°C (32°F to 131°F)
- Storage Temperature: –25°C to +70°C (–13°F to 158°F)
- Humidity: 5% to 95%, non-condensing
- Vibration: 0.2 inch (5–10 Hz), 1 G (10–200 Hz)
- Shock: 5 G, 10 ms duration
