Bently Nevada|TK-3E 177313-02-02-00|Electric Driven

Description
The Bently Nevada TK-3E 177313-02-02-00 is an electric-driven calibration kit designed to simulate shaft vibration and position for testing proximity probes and vibration monitors.

Features

• Simulates mechanical vibration for system calibration
• Includes removable spindle micrometer with magnetic base
• Universal probe mount fits diameters from 5 mm to 19 mm
• Motor-driven wobble plate for vibration signal generation
• No oscilloscope required
• Supports both English and metric scale units

Technical Specifications

• Power Requirements

  • 95–125 Vac or 190–250 Vac, 50/60 Hz, 1A minimum
  • Disconnection via power cable removal

• Vibration Simulation

  • Amplitude range: 50 μm to 254 μm (2 to 10 mils) peak-to-peak
  • Maximum speed: 0 to 5000 cpm ±1000 cpm

• Spindle Micrometer

  • Range: 0 – 25.4 mm (0 – 1000 mils)

• Physical Dimensions

  • Height: 195 mm (7.68 in)
  • Width: 299 mm (11.8 in)
  • Depth: 248 mm (9.76 in)
  • Weight: 5.22 kg (11.5 lb)

• Environmental

  • Indoor use only, up to 2000 m altitude
  • Operating temperature: 0°C to 50°C (continuous use below 40°C recommended)
  • Storage temperature: -18°C to 65°C
  • Humidity: 95% non-condensing
  • Protection rating: IP54 when closed

• Compliance

  • FCC Part 15 compliant
  • EMC Directive 2014/30/EU (EN 61000-6-2, EN 61000-6-4)
  • RoHS Directive 2011/65/EU
  • LVD: EN 61010-1 (Low Voltage Directive 2014/35/EU)